Mill Subcategories

151-175 of 175

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Mill, Roller, Raymond, 6669, 250 HP,
    Stock Number: D741056
    Location: Midwest

    Raymond Roller Mill, model number 6669 C-E High Side. Unit equipped with all internal related grinding components. Un... (More Details...)

  2. Mill, Roller, Williams, 25 HP, 3-Roll, Comet, Spinner Separator, Fan
    Stock Number: D740098
    Location: California

    Williams Roller Mill, 3-Roll Comet type, includes 4' spinner separator, (2) fans, wind box, air lock feeders and duct... (More Details...)

  3. Mill, Rotor, Fritsch, Pulverisette, Type 14.001, 3/4 HP
    Stock Number: S739034
    Location: San Dimas, CA

    Fritsch model Pulverisette rotor mill, type 14.001 with 3/4 hp, 3450 rpm, 110 volt drive. Unit is rotor type with 8 r... (More Details...)

  4. Mill, Sag, 13'6" X 4', Marcy, No Motor,
    Stock Number: D739647
    Location: Canada

    Marcy dry grind sag mill, 13' 6" (4.15 m) diameter x 4' (1.22 m) long, 300 HP motor (not included), includes bull gea... (More Details...)

  5. Mill, Sag, 18' X 10-1/2', Fuller, 1500 HP, R/L,
    Stock Number: S738506
    Location: Timmins, ON, Canada

    SAG mill, 18' diameter x 10-1/2' long, manufactured by Fuller, rubber-lined, driven by 1500 HP, 4160 volt, 1192 RPM, ... (More Details...)

  6. Mill, Sag, 18' X 6', Hardinge, 1000 HP,
    Stock Number: D735558
    Location: DOMINICAN REPUBLIC

    Hardinge-Koppers sag mill, 18' x 6'. Complete with 1000 HP, 4000V, 3 phase, 60 Hz 885 RPM induction Siemens-Allis m... (More Details...)

  7. Mill, Sag, 19.35' X 27.88', Morgardshammar, 1,877 HP,
    Stock Number: D739653
    Location: Finland

    Morgardshammar pebble/sag mill, 19.35' (5.9 m) diameter x 27.88' (8.5 m) long, 2-1,877 hp (1,400 kW) motors. Currentl... (More Details...)

  8. Mill, Sag, 30' X 7', Allis Minerals (Svedala), 4000 HP,
    Stock Number: D733957
    Location: MALI

    Allis Minerals(Svedala), sag mill, 30' diameter x 7' long, 4000 HP motor, 200 RPM, 3300V, 214 amps. Liners still in... (More Details...)

  9. Mill, Sag, 30' x 7', Allis Minerals (Svedala), 4000 HP, Dry,
    Stock Number: D733947
    Location: BALI

    Sag mill, manufactured by Allis Minerals (Svedala), 30' diameter x 7' long, dry grind, driven by 4000 HP motor, 200 ... (More Details...)

  10. Mill, SAG, 36' X 20.5', Metso, 20,000 HP, Unused
    Stock Number: C740224
    Location: Europe

    SAG Mill, 36' diameter X 20.5 long (11m X 6.2m). Manufactured by Metso in 2007, Unused and never installed. Complete ... (More Details...)

  11. Mill, Sag, 38' X 25'5", Metso, 26,000 HP, Unused
    Stock Number: D739652
    Location:

    Unused Metso grate discharge sag mill trommel with replacement panels, 38' (11.58 m) diameter x 25' 5" (7.76 m) long,... (More Details...)

  12. Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused
    Stock Number: D739643
    Location: Canada

    Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive... (More Details...)

  13. Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused
    Stock Number: D739644
    Location: Canada

    Unused FL Smidth sag mill, 40' (12,192 mm) diameter x 25' (7,620 mm) long, designed for 34,866 HP (26,000 kw) wrap ar... (More Details...)

  14. Mill, Sand, Dyno, Mdl KD 450, Bead Mill, Zircomium Beads
    Stock Number: A740638
    Location: Northwest

    Dyno Model number KD 450 bead mill, previously used in R&D facility for liquid organic fertilizer production. It was ... (More Details...)

  15. Mill, Sand, Morehouse Cowles, 12" X 4-1/2", C/st, 40 HP
    Stock Number: S735116
    Location: San Dimas, CA

    Sand mill, Morehouse Cowles, 12" diameter x 4-1/2' high grinding chamber, carbon steel construction, includes water ... (More Details...)

  16. Mill, Sand, Morehouse-Cowles, 7-15-X, 10 HP,
    Stock Number: Z506587
    Location: San Dimas, CA

    Mill, sand, Morehouse-Cowles, Model 7-15-X, exp, complete with 10 HP exp drive, 220V drive, unit offered less pump, ... (More Details...)

  17. Mill, Sand, Morehouse-Cowles, 7-15-X, 15 HP,
    Stock Number: Z506586
    Location: San Dimas, CA

    Mill, sand, Morehouse-Cowles, Model 7-15-X, exp, complete with 15 HP, 220Volt drive. Unit offered less pump, was us... (More Details...)

  18. Mill, Sand, Netzsch, Mdl LME 20, S/st, Jkt, 25 HP,
    Stock Number: C741810
    Location: Chowchilla, CA

    Netzsch model LME 20 horizontal wet grinding mill, media mill, includes 22.7 liter stainless steel, jacketed barrel, ... (More Details...)

  19. Mill, Sand, Petzholdt, 10" X 4-1/2', C/st,
    Stock Number: C736519
    Location: Brisbane, CA

    Media mill, manufactured by Petzholdt, measures 10" diameter x 4-1/2' high, carbon steel construction, jacketed with ... (More Details...)

  20. Mill, Stone, S/st, 25 HP, 2" Inlet, 13-1/2" x 3"
    Stock Number: S740286
    Location: San Dimas, CA

    Stainless steel stone mill, driven by 25 hp, 440 volt, 3540 rpm motor. Unit has 13-1/2" diameter x 3" deep chamber, 2... (More Details...)

  21. Mill, Stone,10", S/st, Bauknecht,
    Stock Number: S741593
    Location: Brisbane, CA

    10" diameter Stone Mill, manufactured by Bauknecht, type RF 15/2-1. Includes stainless steel hopper measuring 18" dia... (More Details...)

  22. Mill, Vibratory, Palla, 50, 100 HP, Jkt, Micronizer
    Stock Number: A736765
    Location: Southwest

    Palla vibrating ball mill, Micronizer, Model# 50, complete with 100 HP main drive and control box, unit is water jack... (More Details...)

  23. Mill, Vibratory, Palla, Mdl 20U, 7.5 HP
    Stock Number: S741287
    Location: Brisbane, CA

    Palla Vibratory Ball Mill, manufactured by Humbolt - Wedag, model 20U. Complete with 7.5 HP motor, 1200 RPM, 220V. Mo... (More Details...)

  24. Mill, Vibratory, Palla, Mdl 20U, Unused
    Stock Number: S741288
    Location: Brisbane, CA

    Unused Palla Vibratory Ball Mill, manufactured by Humbolt - Wedag, model 20U, serial number 20181; was demo unit for ... (More Details...)

  25. Mill, Vibratory, Sweco, M-45, C/st, 2.5 HP,
    Stock Number: S523530
    Location: San Dimas, CA

    Mill, Sweco Vibro-Energy wet grinding, model M-45. Low amp mill. Unit has maximum working capacity of 27 gallons, i... (More Details...)

151-175 of 175

Page:
  1. 1
  2. 2
  3. 3
  4. 4