Nash vacuum pump, Model 904P2, driven by 400 HP, 2300/4160 volt, 60Hz, 1185 RPM motor. Originally used to pull vacuum on...(More Details...)

Nash vacuum pump, Model H8, carbon steel, with 75 HP, 220/440V, V-belt drive, (not unitized), last run as vacuum pump,...(More Details...)

Nash model SC6 vacuum pump including VPSS-4 Grade II water trap silencer/separator, driven by 40 HP, 460V, 1770 RM, 3/60...(More Details...)

Vacuum pump, Sullair, Model SL-522-B-12, liquid ring type, 2-stage, previously driven by 25 HP 3/60/460V, 1770 RPM moto...(More Details...)

SIHI vacuum pump, model LPHR 55316-ABAAA0B0. Complete with 20 HP 3/60/230/440 volt, 1760 RPM motor. Can be used on 50 ...(More Details...)

Vacuum pump, SIHI, model LPHY 5612-3N115.02. 0, serial number 2340 774 & 775. Pump is rated approx 250 CFM @ 26&quo...(More Details...)

Gas-ring vacuum pump/compressor, side channel type, manufactured by Elmo Rietschle (Gardner Denver), series G_200, Mod...(More Details...)

Kinney liquid ring vacuum pump, model KLRC-200-KFA, serial number 97-0428-072x3-4. Driven by 15 HP, 1750 RPM motor. Rate...(More Details...)

Vacuum pump, Fuller fluidizer, model S1F, serial number 1164, rated 600 CFM @ 1-1/2 PSI. Driven by 10 HP 3/60Hz, 230/4...(More Details...)

Sullair rotary vacuum pump model VS10-7-5/A/SUL: with 7.5 hp drive 230/460 volt, 3 phase. Unit has capacity of 120 ACFM,...(More Details...)

(2) Vacuum pump, manufactured by Rietschle, type VCEH/HA 160 (07) 102165-0700, rated for 10/0.50 mbar (abs.) , 160/192 c...(More Details...)

Liquid ring vacuum pump, with Croll Reynolds ejector pump, rated for 20 GPM, Model# S10, includes liquid ring vacuum p...(More Details...)

(5) Vacuum liquid ring pump, Kinney model KLRC-75KFA, driven by 7.5 HP motor, carbon steel contact parts. Serial numbe...(More Details...)

Vacuum liquid ring pump, carbon steel construction, Kinney model KLRC-75F, driven by 7.5 HP motor, 1760 RPM. Serial nu...(More Details...)

Kinney rotary lobe, oil vacuum pump, model DVD-8-8-10. Unit is complete with 5 HP 220/440 volt drive with silencer. un...(More Details...)

Kinney vacuum pump model KLRC-40, liquid ring, rated at 23 CFM @ 28" hg, carbon steel. Unit requires 5 HP, 1800 RP...(More Details...)

Nash vacuum pump, Hytor, H3, directly connected to 5 HP, 2745 RPM, 230/460V drive, unitized, 65 CFM at 15", 60 CFM...(More Details...)

(9) Vacuum pump, Nash model AL673, unit constructed of carbon steel, driven by 3 HP motor. ...(More Details...)

Liquid ring vacuum pump, Corona model CEH204B2, driven by 3 HP motor. Serial number 20349. ...(More Details...)

Lambert Ind. Vacuum pump, Model 4121, 3 HP, 230/460V motor....(More Details...)

Lambert vacuum pump, Model 04141, 2 HP, 30 CFM at 29.96" high, 17 CFM at 15" high, with 2 HP, 3/60/230 Volt mo...(More Details...)

(2) Busch vacuum pump, Vane rotary type, RA0025.E546.1002, serial number E45633. Displacement 20 CFM, vacuum is 1.5 torr...(More Details...)

Standard regenair blower, vacuum pump, manufactured by Gast, Model number R4310A-2, rated for 92 CFM @ 52 PSI, driven ...(More Details...)

Vacuum pump, Kinney with 1/2 HP motor all mounted on castered frame. Pump is rated about 10 CFM @ 26" hg. ...(More Details...)

Vacuum pump, Micro-Pump frame 56C, unit is of carbon steel construction, driven by 1/2 HP motor. Internals are present...(More Details...)

Welch vacuum pump, model 1400 DuoSeal, with 1/2" in/out, unit has 1/3 HP, 115V, 1725 RPM single phase motor, is s...(More Details...)

Vacuum pump, manufactured by Gast Corp. Unit has 1/4" inlet & 1/4" outlet, model 0523-VAB-G180DX, Serial ...(More Details...)

Pump, vacuum, manufactured by Gast, model 0740-V3, driven by 1/4 HP, 1-phase, 115V, 1725 RPM electric motor. ...(More Details...)

Steam evactor with condenser, Croll-Reynolds, Model 15, used to evacuate product from a source through the introductio...(More Details...)

Steam evactor with condenser, Croll-Reynolds, Model 1Y, used to evacuate product from a source through the introductio...(More Details...)

Steam evactor with condenser, Croll-Reynolds, Model 4X, used to evacuate product from a source through the introductio...(More Details...)

Vacuum pump, Cenco Megavac. No motor (est. 1 HP required). Rated about 10 CFM @ 28" hg. ...(More Details...)

Kinney carbon steel model KLRC-100 KFA liquid ring vacuum pump. Unit has 1.5" inlet/outlet, cap of 6 gm, 100 CFM. S...(More Details...)

Kinney model KLRC-75F liquid ring vacuum pump. Unit has 1.5" inlet/outlet, cap of 5 gm, 75 CFM. Serial number 84-12...(More Details...)

Travaini liquid ring vacuum pump single stage, type TRVA 50-220/C/RA with 1" flanged inlet/outlet. Unit is 10 Hp, 1...(More Details...)

(2) Welch 1395 rotary vane vacuum pump, 2 stage, large belt drive vacuum pump with air displacement, nominal cfm of 71.1...(More Details...)

Kinney high vacuum pump model MB-400C cast iron. Unit is 5 Hp, 208/230/460 volt, 3450 rpm , 3-phase. Unit has approximat...(More Details...)

Gast model 1023-P304-G583X compressor/vacuum pump, 3/4 hp, rotary vane compressor type, 115/208/230 volt, single phase, ...(More Details...)

Gast model 0823-V131Q-SG608X compressor/vacuum pump, 3/4 hp, rotary vane compressor type, 115/208/230 volt, single phase...(More Details...)

Douseal vacuum pump, model 1403, Manufactured by Welch. Unit has 1/2" inlet and outlet, is 1/4 hp, 115/230 volt, 17...(More Details...)

Becker Italia vacuum pump, Type KVT. Unit is 1-1/2" sanitary fittings, 3 HP, 208/230V, 1700 RPM. Unit is type KVT,...(More Details...)

Pump, vacuum, Graham Manufacturing steam ejector, 304 stainless steel, Serial number 83781, motive pressure 140 PSI. U...(More Details...)

(2) pump, vacuum, Graham Manufacturing 2 stage steam ejector, 304 stainless steel, Serial number 90831-3 motive pressu...(More Details...)

Pump, vacuum, Graham Manufacturing steam ejector, 304 stainless steel, Serial number 82955, motive pressure 140 PSI. U...(More Details...)

Pump, vacuum, Graham Manufacturing steam ejector, 304 stainless steel, Serial number 83781, motive pressure 140 PSI. U...(More Details...)

Pump, vacuum, Graham Manufacturing 2 stage steam ejector, carbon steel, Serial number 83183 on 2nd stage, motive press...(More Details...)

Pump, vacuum, Graham Manufacturing 2 stage steam ejector, 2nd stage is a Graham serial number 90831-2, stainless steel...(More Details...)

Vacuum pump, Graham steam ejector, 304 stainless steel, Serial number 83781, motive pressure 140 PSI. Unit has 1" ...(More Details...)