View All Inventory

Mill

Mill Subcategories

Page
per page

101-150 of 170

Set Ascending Direction
  1. Mill, Hammer, Queen City, 12" X 18", S/st, Fixed Hammers,
    Stock Number: Z478325
    Location: Brisbane, CA
    Queen City hammermill, stainless steel, 12" x 18", fixed hammers, 4" wide x 3/8" thick, split end t...(More Details...)
  2. Mill, Hammer, Schutz O'Neil, Mdl 422222, Air Swept, 100 HP,
    Stock Number: C741908
    Location: Chowchilla, CA
    Schutz O'Neil air swept pulverizer, approximately 24" diameter grinding chamber, model "Schutz", ser...(More Details...)
  3. Mill, Hammer, West Salem, 200 HP, Pallet Recycling,
    Stock Number: C734512
    Location: Brisbane, CA
    Hammer mill, West Salem Machinery, Model number 2852BH, carbon steel, driven by 200 HP, 1165 RPM, 460 Volt, 3/60 hz moto...(More Details...)
  4. Mill, Hog, Hydro-flaker, C/st, 100 HP,
    Stock Number: S479970
    Location: San Dimas, CA
    Hog mill, hydra flaker, unit has 24" diameter x 26" rotating drum with approximately 4" wide knives for ...(More Details...)
  5. Mill, Hog, Mitts & Merrill, C/st, 75 HP, Mdl 13CD,
    Stock Number: S479979
    Location: Brisbane, CA
    Mill, Mitts & Merrill, model 13CD, wood hog. Mill has 30" diameter x 13" wide solid rotor with adjustable...(More Details...)
  6. Mill, Hog, Williams Crusher, 60 HP, C/st, 6 Hammers
    Stock Number: S740430
    Location: San Dimas, CA
    Williams Crusher, Williams & Pulverizer Co. hog mill with 2 rows of 2 swinging hammers and 2 rows of 1 swinging hamm...(More Details...)
  7. Mill, Impact, TAS, C/st, 350 HP, Mdl 42B, (2)
    Stock Number: S516500
    Location: Oroville, CA
    (2) Vertical shaft impact mill, Theory Application Service (TAS) Model 42B with 350 HP vertical v-belted electric motor ...(More Details...)
  8. Mill, Jar, Gilson, Mdl 2000 MD, Dual Roller,
    Stock Number: S740389
    Location: Brisbane, CA
    Gilson Jar mill, model number 2000 Micro-Deval. Unit includes four (4) rollers measuring 2" diameter X 12" lon...(More Details...)
  9. Mill, Jars, (7) 9.5 x 12", SZ1, 1.3 Gal, S/st
    Stock Number: S735140
    Location: San Dimas, CA
    Stainless steel grinding jar, Size 1 with 1.3 gallon total capacity. Unit has positive lid locking bar and hand wheel ...(More Details...)
  10. Mill, Jars, 9.5" x 12", US Stoneware, SZ1, 1.3g, (3)
    Stock Number: S737727
    Location: San Dimas, CA
    (3) US Stoneware type high alumina fortified porcelain grinding jars, size 1 with 1.3 gallon total capacity. Unit has po...(More Details...)
  11. Mill, Jet, 24", C/st, Fluid Energy, 1500 CFM, (2)
    Stock Number: C479996
    Location: California
    (2) Jet mill, Fluid Energy 24" diameter microjet with carbon steel contacts. System includes pneumatically discha...(More Details...)
  12. Mill, Jet, 24", C/st, Sturtevant, 1000 CFM, (6)
    Stock Number: S732953
    Location: Brisbane, CA
    (6) Jet mill, 24" diameter, carbon steel contact parts, pancake style design, with 2" diameter product feed t...(More Details...)
  13. Mill, Jet, 36", Micronizer, Removable Liners,
    Stock Number: S479998
    Location: San Dimas, CA
    36" diameter jet mill, Model #36 single chamber micronizer. Last used on talc, condition excellent, removable lin...(More Details...)
  14. Mill, Jet, 42", C/st, 3300 CFM, 600 HP, (2)
    Stock Number: S479994
    Location: San Dimas, CA
    (2) 42" diameter jet mills, model #42 single chamber Micronizer. Last used on talc, condition excellent, removabl...(More Details...)
  15. Mill, Lump Breaker, 36" x 30" x 20", S/st, Cage Mill, 5 HP,
    Stock Number: C741915
    Location: Chowchilla, CA
    Lump breaker, including stainless steel hopper with paddle breaker arms and cage milling section. Hopper measures 36&quo...(More Details...)
  16. Mill, Lump Breaker, 43" x 43", S/st, 2-Roll, S/st Pins,
    Stock Number: S740950
    Location: San Dimas, CA
    Twin roll lump breaker, stainless steel construction, Includes 7" diameter x 34" long stainless steel shafts w...(More Details...)
  17. Mill, Lump Breaker, 5" X 12", S/st, 3 HP, Wyssmont
    Stock Number: S464925
    Location: Brisbane, CA
    Wyssmont 2-reel lump breaker, all stainless steel contacts, 5" diameter x 12" face open reels, each driven by ...(More Details...)
  18. Mill, Mikro, 1SH, 1/3 HP, C/st, Hammer, Screw Feed,
    Stock Number: S741595
    Location: Brisbane, CA
    Mikro Pulverizer, 8" X 3" milling chamber. Includes 12" X 12" feed hopper tapering to 4" X 4&qu...(More Details...)
  19. Mill, Mikro, 2DH, C/st, No Drive, Less Feed
    Stock Number: S482011
    Location: San Dimas, CA
    Mikro Pulverizer model 2DH mill frame with bottom housing, mounted on stand. Unit is carbon steel contact parts, rated t...(More Details...)
  20. Mill, Mikro, 2GF, C/st, 5 HP,
    Stock Number: Z482100
    Location: Brisbane, CA
    Mill, Mikro-Pulverizer, Model 2GF, carbon steel, driven by a 5 HP 220/440V belt drive, mounted on frame with legs, seria...(More Details...)
  21. Mill, Mikro, 2TH, C/st, 20 HP,
    Stock Number: S736455
    Location: San Dimas, CA
    Mikro Pulverizer model 2TH with 2 wide stirrup hammers. Unit is carbon steel contact parts, rated to 4500 RPM. Unit is...(More Details...)
  22. Mill, Mikro, 3TH, C/st, Screw Fed, 30 HP, Stirrup Hammers,
    Stock Number: S741960
    Location: San Dimas, CA
    Mikro 3TH grinding mill, hammer mill, carbon steel construction, 14" diameter x 14" wide rotor with approx. 16...(More Details...)
  23. Mill, Mikro, FP-7, C/st, Hosokawa, 600 HP, (2)
    Stock Number: C481251
    Location: San Dimas, CA
    (2) Mill, Mikro-Pulverizer, Hosokawa, Model FP-7, airswept hammermill with Whizzer. Carbon steel contact parts. Previous...(More Details...)
  24. Mill, Muller, Grinder, Hoover, Mdl M5, 1/2 HP,
    Stock Number: S739411
    Location: San Dimas, CA
    Hoover automatic muller/grinder, model M5, plate size 8" diameter. Unit driven by 1/2 hp, 115/230 volt, 1725 rpm XP...(More Details...)
  25. Mill, Pellet, California, 150, 150 HP, (2)
    Stock Number: S738164
    Location: Brisbane, CA
    (2) California pellet mill, manufactured by CPM, driven by 150 HP motor, floating die pellet mill. Mill includes feed ...(More Details...)
  26. Mill, Pellet, California, Century 100 C, Refurbished,
    Stock Number: A742425
    Location: Southeast
    California Pellet Mill, model Century 100 C. Unit has been refurbished with less than 50 hours run-time since. Very good...(More Details...)
  27. Mill, Pellet, Sprout Waldron, 21-200, S/st, 200 HP
    Stock Number: A741961
    Location: West Coast
    Sprout Waldron Pellet Mill, model number 21-200. Rated for approximately 4-5 tons per hour depending on product. Include...(More Details...)
  28. Mill, Pug, 10.5" x 9.5", Starkey, Extruder, Cutter
    Stock Number: C740517
    Location: Chowchilla, CA
    Starkey Machinery Pugmill/Extruder and Automatic Wire Cutter, Model 851. Includes 10 1/8" x 9 1/2" hopper whic...(More Details...)
  29. Mill, Pug, 19" X 15" X 14", Walker, S/st, 3/4 HP,
    Stock Number: S736713
    Location: Brisbane, CA
    Walker pug mill, measures 19" x 15-1/2" x 14" deep, stainless steel contacts, includes hopper leading to...(More Details...)
  30. Mill, Pug, McCarter, 6' X 6' X 5', Dual Shaft, C/st, 100 HP,
    Stock Number: S739447
    Location: Chowchilla, CA
    McCarter Model B pug mill, chocolate equipment, conche. Trough measures 6'4" long X 5'8" wide X 4�...(More Details...)
  31. Mill, Quadro, Comil, 196-S, S/st, 15 HP,
    Stock Number: S496300
    Location: San Dimas, CA
    Quadro CoMil model 196S, with 15 HP XP direct drive main motor, 220/440V, 900 RPM. Designed to grind between 10,000 an...(More Details...)
  32. Mill, Raymond, Bowl, Mdl 573, 26,000# coal/hr
    Stock Number: C738790
    Location: Alabama
    Raymond bowl mill, Model 573, coal pulverizer. Last used to fire rotary kiln in cement plant rated at 26,500 pounds per ...(More Details...)
  33. Mill, Raymond, Imp, Model 83, 400 HP, Pre-Heater
    Stock Number: D739613
    Location: Southern California
    Raymond Impact mill, Model 83, IMP Mill, driven by 400 HP motor, 893 RPM, 460 Volt, Amps 475 deg. F. Hammers measure 22&...(More Details...)
  34. Mill, Raymond, Screen, #1, 18" X 24", Est 25 HP,
    Stock Number: Z517890
    Location: San Dimas, CA
    Screen mill, raymond, Model #1, with 8" x 15" feed opening, 18" x 24" grinding chamber, carbon stee...(More Details...)
  35. Mill, Rietz, Fluffer, RF-18-K, S/st, Less Drive
    Stock Number: S467905
    Location: San Dimas, CA
    Rietz fluffer mill, model RF-18-K. Unit has stainless steel contact parts, unitized on stand, less drive. Unit requires...(More Details...)
  36. Mill, Rod, 10'10" X 16', Allis Mineral Systems, 950 HP,
    Stock Number: D739649
    Location: Australia
    Rod mill, 10' 10" (3.3 m) diameter x 16' (4.87 m), manufactured by Allis Mineral Systems Australia / Mets...(More Details...)
  37. Mill, Rod, 13' X 18'8", Nordberg, 1,500 HP,
    Stock Number: D739663
    Location: Arizona
    Nordberg 13' diameter x 18' 8" long rod mill with 1,500 HP Westinghouse synchronous motor through Fawick ...(More Details...)
  38. Mill, Rod, 3' X 8', Marcy, No Motor,
    Stock Number: D741556
    Location: United States
    Rod Mill, 3' diameter X 8' long, manufactured by Marcy. Unit is currently less drive. Mounted on heavy-duty sk...(More Details...)
  39. Mill, Rod, 32" x 30", C/st, 25 HP,
    Stock Number: C736747
    Location: San Dimas, CA
    Rod mill measuring 32" long x 30" wide x 28" id. Unit has mxing door and discharge door. 25 HP, TEFC mot...(More Details...)
  40. Mill, Rod, 9.5' x 12', Hardinge, No Motor
    Stock Number: D740099
    Location: California
    Hardinge Rod Mill, measures 9.5' x 12'. Includes (2) sets of bull gears (2) sets of pinion gears on shafts, mi...(More Details...)
  41. Mill, Rod, 9.5' X 13', Marcy,
    Stock Number: D734871
    Location: California
    Rod mill, 9.5' diameter x 12' long, manufactured by Marcy, formerly driven by 600 HP motor and gear reducer (l...(More Details...)
  42. Mill, Roll, 10" X 22", JH Day, 10/5 HP, 3 Roll,
    Stock Number: S504600
    Location: San Dimas, CA
    J.H. Day 3-roll mill size 10" x 22". Unit complete with 10/5 HP 2 speed 440 volt drive. Mill has manual roll ...(More Details...)
  43. Mill, Roll, 12" X 12", Lehman, 15 HP, 2 Roll,
    Stock Number: S519267
    Location: Brisbane, CA
    Lehman 2 roll mill, flaking/cracking type, 12" diameter x 12" face, equipped with a 15 HP, gear head, chain t...(More Details...)
  44. Mill, Roll, 14" X 30", JH Day, 25 HP, 3 Roll
    Stock Number: S742516
    Location: San Dimas, CA
    JH Day, 3-Roll Mill, Model AN 08602, complete with 14" diameter x 30" face cored mild steel rolls. Mill has h...(More Details...)
  45. Mill, Roll, 3-3/4" X 8", Kent, 3-3/4" X 8", 3 Roll
    Stock Number: Z506580
    Location: San Dimas, CA
    Mill, roll, Kent, 3-3/4" x 8", 3 roll, manual adjustment, water cooled, less motor. ...(More Details...)
  46. Mill, Roll, 4" x 36", Ocrim, Cracking Roller Mill, 20 HP,
    Stock Number: C741906
    Location: Chowchilla, CA
    Ocrim pepper mill, cracking roller mill, includes two sets of approximately 4" diameter x 36" long rolls, driv...(More Details...)
  47. Mill, Roll, 4" X 8", Kent, 1 HP, 3 Roll
    Stock Number: S742517
    Location: San Dimas, CA
    Kent Machine Works, 3-Roll mill, 4" diameter x 8" face, cored, mild steel rolls with 1 Hp Explosion Proof driv...(More Details...)
  48. Mill, Roll, 6" X 12", Reliable, 2 Roll,
    Stock Number: C738353
    Location: Vicksburg, MS
    Roll mill, 6" diameter x 12" face, cored rolls, manufactured by Reliable, mild steel rolls with 1 Hp motor. U...(More Details...)
  49. Mill, Roller, Raymond 5048, (2)
    Stock Number: D742499
    Location: Midwest
    (2) Used 5048 C-E Raymond High Side Roller Mills. Units are equipped with all internal related grinding components; gear...(More Details...)
  50. Mill, Roller, Williams, 25 HP, 3-Roll, Comet, Spinner Separator, Fan
    Stock Number: D740098
    Location: California
    Williams Roller Mill, 3-Roll Comet type, includes 4' spinner separator, (2) fans, wind box, air lock feeders and du...(More Details...)
Page
per page

101-150 of 170

Set Ascending Direction