View All Inventory
Bakery Equipment

Bakery Equipment

Bakery Equipment Subcategories

Page
per page

1-50 of 279

Set Ascending Direction
  1. Cartoner, Horizontal, EconoCorp, Econoseal Spartan, Mdl 8942
    Stock Number: C743010
    Location: Brisbane, CA
    Econoseal Spartan Horizontal Cartoner, Econo Corp., Model number 8942, used to erect, load and close end load cartons at...(More Details...)
  2. Cartoner, Tisma, Mdl TC-600MFX, Horizontal, 200 CPM,
    Stock Number: A738063
    Location: Midwest
    Cartoner, Tisma, Model TX-600MFX. Was last running carton sizes from 1/2" deep x 4" wide x 4" tall up to...(More Details...)
  3. Coater, Enrober, Perfect Choco, Mdl ENRO-6, 6" x 79",
    Stock Number: S742171
    Location: San Dimas, CA
    Perfect Choco 6” chocolate enrober, model ENRO-6. Full chocolate coating bottom enrobing or bottom and sides up to 0.5...(More Details...)
  4. Conveyor, Belt, 10" X 10'6", S/st, National,
    Stock Number: S742608
    Location: San Dimas, CA
    Stainless steel belt conveyor, manufactured by National Conveyor Corp., 10" wide x 10'6" long, Model NTMC...(More Details...)
  5. Conveyor, Belt, 10" X 10'8", Bucket, Incline, S/St, Portable
    Stock Number: S742622
    Location: San Dimas, CA
    Food grade belt incline conveyor, 10" x 10'8" corrugated sidewall type belting with pockets measuring 8&q...(More Details...)
  6. Conveyor, Belt, 12" x 8.5', Incline, Z-Frame, Elevator,
    Stock Number: S742645
    Location: San Dimas, CA
    Z-type stainless steel inclined feed conveyor with cleated belt. Unit has 2' long horizontal infeed section, 8'...(More Details...)
  7. Conveyor, Belt, 30" X 10'8", S/st, HMI, Incline
    Stock Number: C742303
    Location: Brisbane, CA
    Stainless Steel Incline Conveyor with food grade belt, 30" wide X 10'8" long with 43" discharge heig...(More Details...)
  8. Conveyor, Belt, 30" x 5'10", Food Grade, S/st, 1 HP
    Stock Number: C742851
    Location: San Dimas, CA
    Conveyor, stainless steel, food grade belt, 30" wide 70" long with 40" in height with belt tensioner. Uni...(More Details...)
  9. Conveyor, Belt, 30" x 6'4", Food Grade, S/st, 1 HP, 240/260 Volts
    Stock Number: C742852
    Location: San Dimas, CA
    Conveyor, stainless steel, food grade belt, 30" wide 76" long with 44" discharge height and dough sheeter...(More Details...)
  10. Conveyor, Belt, 32" x 12', S/st, Rigos, 1/2 HP,
    Stock Number: C742847
    Location: San Dimas, CA
    Rigos stainless steel flat wire mesh belt conveyor, 32" wide x 144" with 45" incline. Belt openings 7/16&...(More Details...)
  11. Conveyor, Belt, 36" X 10'10", S/st, HMI, Incline
    Stock Number: C742304
    Location: Brisbane, CA
    Stainless Steel Incline Conveyor with food grade belt, 36" wide X 130" long with 60" discharge height (wi...(More Details...)
  12. Conveyor, Belt, 36" x 12', S/st,
    Stock Number: C742840
    Location: San Dimas, CA
    Conveyor, Stainless steel flat wire mesh belt conveyor, 36" wide x 12'long with 25" incline. Belt opening...(More Details...)
  13. Conveyor, Belt, 36" x 6' S/st, Rigos, 1/2 HP
    Stock Number: C742842
    Location: San Dimas, CA
    Rigos stainless steel flat wire mesh belt conveyor, 36" wide x 72" incline. Belt openings 7/16" x 1-5/8&q...(More Details...)
  14. Conveyor, Belt, 36" x 9', S/st, 1/2 HP, 230/460 Volts,
    Stock Number: C742841
    Location: San Dimas, CA
    Conveyor, stainless steel flat wire mesh belt, 36" wide x 9' incline. Belt openings 7/16" x 1-5/8", ...(More Details...)
  15. Conveyor, Belt, 6" X 5', Incline, Food Grade, S/st Frame,
    Stock Number: S736315
    Location: San Dimas, CA
    Incline belt conveyor, 6" x 5' with food grade plastic mesh belt with small cleats and stainless steel frame. ...(More Details...)
  16. Conveyor, Belt, 7.5" x 18', Modular Conv, 1 hp, 90 deg.,
    Stock Number: S740486
    Location: San Dimas, CA
    Modular Conveyor Components plastic chainbelt conveyor. Unit measures 7.50" wide x 18' long with 90-degree tur...(More Details...)
  17. Conveyor, Belt, 7.5" x 4', Plastic, 2-Line, 1/2 Hp, (2)
    Stock Number: C741445
    Location: San Dimas, CA
    (2) Plastic chain belt transfer / accumulation conveyor, 7.5" wide x 4' long. Each Unit has 1/2 Hp, 1750 rpm, ...(More Details...)
  18. Conveyor, Belt, 7.5" x 7'8", S/st, Safeline
    Stock Number: S740535
    Location: Chowchilla, CA
    Stainless steel 180-degree belt conveyor, 7.5" wide belt, approximately 92" linear dimension. Manufactured by ...(More Details...)
  19. Conveyor, Belt, 7.5" x 8', S/st, 1 HP, 90 Deg, (2)
    Stock Number: S740485
    Location: San Dimas, CA
    (2) Modular Conveyor Components plastic belt with 90-degree turn measuring 7.50" wide x 8' long, Model 020-033...(More Details...)
  20. Conveyor, Belt, 7.75" X 11', Triple, System, S/st,
    Stock Number: S740931
    Location: San Dimas, CA
    Pacific Conveyor Systems plastic mesh belt triple conveyor system. (1) measures 7-3/4" wide x 11' long; (2) me...(More Details...)
  21. Conveyor, Belt, 8" x 16', Pacific, 90 Deg, Frame Only,
    Stock Number: S738574
    Location: San Dimas, CA
    Pacific Conveyor Systems conveyor, Stainless steel frame for 8" x 16' (overall length) interlock belt with (2)...(More Details...)
  22. Conveyor, Screw, 6" x 5', S/st, Less Drive
    Stock Number: S739066
    Location: San Dimas, CA
    Tubular screw conveyor, 6" dia x 5' long, stainless steel frame, urethane screw. Unit has 8" inlet, 6&quo...(More Details...)
  23. Conveyor, Screw, 7.5" x 4', S/st, 1/15 HP
    Stock Number: C742700
    Location: Chowchilla, CA
    Stainless steel screw conveyor, screw measures 7-1/2" diameter x 4' long, 8" wide stainless steel trough....(More Details...)
  24. Conveyor, Screw, 9.5" x 5'9", S/st, 1.5 HP, 10" In/Out
    Stock Number: C742698
    Location: Chowchilla, CA
    Stainless steel screw conveyor, screw measures 9-1/2" diameter x 5'9" long, 10" wide stainless steel...(More Details...)
  25. Conveyor, Screw, 9.5" x 5'9", S/st, 10" In/Out
    Stock Number: C742697
    Location: Chowchilla, CA
    Stainless steel screw conveyor, screw measures 9-1/2" diameter x 5'9" long, 10" wide stainless steel...(More Details...)
  26. Conveyor, Vibratory, 12" x 12', S/st, Key,
    Stock Number: S734561
    Location: Chowchilla, CA
    Key vibratory shaker, 12" wide x 12' long, stainless steel contacts, less drive. ...(More Details...)
  27. Conveyor, Vibratory, 15" x 16', S/st, Heat & Control,
    Stock Number: S741112
    Location: Brisbane, CA
    Heat & Control FastBack vibratory conveyor, measures 12" wide X 15' long, all stainless steel construction...(More Details...)
  28. Conveyor, Vibratory, 24" X 8', S/St, Meyer, (2) 0.47 HP,
    Stock Number: L738710
    Location: Chowchilla, CA
    Vibratory conveyor, 24" wide x 8' long, manufactured by Meyer, Model number VF11-24-8. All stainless steel c...(More Details...)
  29. Cooker, 80 Gallon, S/st, Rotating Coil, Hot Break Tank
    Stock Number: S735563
    Location: San Dimas, CA
    Process systems Inc. rotating coil holoflite, horizontal hot break tank. T735563ank size is 22" wide x 4' long...(More Details...)
  30. Cooker, Braiser, 20 Gallon, S/st, Electric,
    Stock Number: S731667
    Location: Brisbane, CA
    Cooker, braising pan, stainless steel, measuring 24" wide x 30" x 6-1/2" deep. Unit is a model TS-236-T6...(More Details...)
  31. Cooker, Braiser, 30 Gallon, S/st, Hobart, Electric
    Stock Number: A737592
    Location: Northern California
    Cooker, braising pan, manufactured by Hobart, Model number LOP18, chamber measures 22" x 22" x 7" deep, ...(More Details...)
  32. Cooker, Braiser, 40 Gallon, S/st, Market Forge, Mdl 1700, Tilt
    Stock Number: S742462
    Location: San Dimas, CA
    Cooker, Braiser, Market Forge, 40-Gallon capacity, Model 1700 Cooker/Skillet, natural gas, enclosed cabinet base, standa...(More Details...)
  33. Cooker, Braiser, Groen, Mdl FPC-4C, Electric
    Stock Number: S742012
    Location: Brisbane, CA
    Groen electric braising pan, model FPC-4C. 3 Phase, 208 V, 60 Hz, 14.3 KW. Serial number 4933 C. Braising pan measures 4...(More Details...)
  34. Cooker, Rotary, 41" x 6', S/st, Jkt, 150 PSI, Ras Process
    Stock Number: S734951
    Location: San Dimas, CA
    RAS Process Equipment cooker. Chamber measures 41" x 6' long with rotating paddles. Unit is double jacketed, r...(More Details...)
  35. Cooker, Steamer, 16" x 15-1/2", Market Forge, Gas
    Stock Number: S742205
    Location: San Dimas, CA
    Market Forge model Dual Matic 3100 steamer cooker. Chamber measures 16" wide x 15-1/2" high x 22" deep, h...(More Details...)
  36. Cutter, Slab Line, Bread, Tromp, Mdl 10711, S/st,
    Stock Number: A742388
    Location: Northwest
    Tromp Model 10711 Production line with Model 10796 scrap conveyor, previously making flat bread and pocket sandwiches, n...(More Details...)
  37. Depositor, Cheese, G Mondini, Mdl DR/3, S/st, 3 HP, A737689
    Stock Number: A737689
    Location: Midwest
    Depositor, cheese, G. Mondini, Model DR/C, stainless steel, 6 tube, extruder type. Complete with 3 HP, 220V, 60 Hz mot...(More Details...)
  38. Depositor, Cheese, G Mondini, Mdl VSB/L, Piston, S/st, (4)
    Stock Number: S731696
    Location: Brisbane, CA
    (4) Doser/depositor, filler, manufactured by G. Mondini, Model VSB/L, stainless steel pistons, electrical 220 volt, 3-p...(More Details...)
  39. Depositor, Fedco, Mdl D26400, S/st
    Stock Number: S742931
    Location: San Dimas, CA
    Fedco Model D26400 Depositor, all stainless steel construction with two (2) main scaling pistons, set up for variable sp...(More Details...)
  40. Depositor, Goodway, 1-Head, Mdl PF10, With Hopper
    Stock Number: A742453
    Location: California
    Used Goodway Model PF10 Depositor with Hopper. Hopper volume: approximately 1.50 cubic feet. Discharge height: 33 inches...(More Details...)
  41. Depositor, Hinds Bock, 8 Head, Conveyor, Model 8P-08A
    Stock Number: S737278
    Location: San Dimas, CA
    Hinds-Bock filler/depositor, model 8P-08A, eight head with 1-3/8" diameter pistons and max 5" stroke. Unit inc...(More Details...)
  42. Depositor, In-line, 20-Head, S/st, 2-Lane, Automatic, (2)
    Stock Number: S740240
    Location: San Dimas, CA
    (2) Automatic In-line depositor, includes (2) rows of 10-heads, totaling 20-head piston filling nozzles with 5/16" ...(More Details...)
  43. Depositor, In-line, 20-Head, S/st, 2-Lane, Hopper,
    Stock Number: S740241
    Location: San Dimas, CA
    Automatic In-line depositor, includes (2) rows of 10-heads, totaling 20-head piston filling nozzles with 5/16" open...(More Details...)
  44. Depositor, In-line, 20-Head, S/st, 2-Lane, Pneumatic,
    Stock Number: S740239
    Location: San Dimas, CA
    In-line depositor, includes (2) rows of 10-heads, totaling 20-head piston filling nozzles with 5/16" openings. Incl...(More Details...)
  45. Depositor, Per-Fil, 2-Head, S/st, Spot Deposit, (2)
    Stock Number: S738479
    Location: Brisbane, CA
    (2) Per-Fil piston filler, depositor, stainless steel, includes deposit head with (2) 3" x 3" spot deposits, ...(More Details...)
  46. Depositor, Unifiller, Mini Depositor, Single Head,
    Stock Number: A741416
    Location: West Coast
    Unifiller dough depositor, type Mini Depositor. Unit designed for dough depositing and extruding for various products su...(More Details...)
  47. Detector, Metal, 10" X 5", Ceia, Mdl. THS/3F, S/st, Conveyor
    Stock Number: A740754
    Location: Southeast
    Stainless steel metal detector with belt conveyor, aperture measures 10" wide x 5" high. Manufactured by Ceia,...(More Details...)
  48. Detector, Metal, 12" x 4", Goring Kerr, Ishida Checkweigher
    Stock Number: S742209
    Location: Brisbane, CA
    Goring Kerr Model DSP-2 Metal Detector with integrated Ishida checkweigher. Metal detector has 12" x 4" high a...(More Details...)
  49. Detector, Metal, 12" X 4", S/st, Safeline, Conveyor,
    Stock Number: A741760
    Location: West Coast
    Safeline metal detector, 12" wide X 4" high aperture, includes inclined belt conveyor (less belting). Previous...(More Details...)
  50. Detector, Metal, 12" x 5', Loma, IQ, Start/Stop
    Stock Number: S742282
    Location: Brisbane, CA
    Loma IQ metal detector. aperature is 12" wide x 4" high, Metal detector is set up with retractable reject syst...(More Details...)
Page
per page

1-50 of 279

Set Ascending Direction