View All Inventory

Minerals Processing Featured Equipment

Minerals Processing Featured Equipment

M&E is a supplier to the global market of quality used mining & minerals processing machinery. We offer all types and sizes of equipment used in virtually any mining & minerals processing facility. View some of our featured minining & minerals processing machinery immediately available from our inventory.
Page
per page

1-50 of 85

Set Ascending Direction
  1. Bin, 300 CF, Dump Hopper, C/st, 12' X 12' X 80", Dakota Fab,
    Stock Number: C740618
    Location: Chowchilla, CA
    Feed hopper, 12' X 12' X 80" with inverted pyramid bottom, on angle iron stand, 10' X 10', disc...(More Details...)
  2. Bin, 50 CF, S/st, 4'6" X 7', Cone Bottom,
    Stock Number: C740347
    Location: South Carolina
    Stainless steel surge bin, 50 Cubic Foot capacity. Unit measures 54" diameter X 96" tall with cone bottom. Pre...(More Details...)
  3. Bin, Cold Feed, 3-Compartment, Weigh Hopper, Belt Conveyor
    Stock Number: C739936
    Location: Chowchilla, CA
    Used 3-compartment cold feed bin with weigh hopper and take away belt conveyor, previously used at concrete batch plant....(More Details...)
  4. Boiler, Hot Oil, Eclipse Dowtherm, 750,000 BTU, Gas/Oil,
    Stock Number: S733018
    Location: Chowchilla, CA
    Eclipse Dowtherm heater, 750,000 BTU, natural gas, 80 square feet heat surface area, fired with natural gas or number 2 ...(More Details...)
  5. Calciner, 6" X 5', Custom, S/st, Gas-fired,
    Stock Number: S733023
    Location: Chowchilla, CA
    High temperature rotary calciner, indirect fired, tube measures approximately 6" diameter x 5' long tube on s...(More Details...)
  6. Centrifuge, Basket, CMI, 36", Coal Dryer, Mdl EBWB
    Stock Number: S740704
    Location: Chowchilla, CA
    CMI 36" Basket Centrifuge for coal fines drying. Model number EBWB. Complete with 50 HP motor through V-belt drive....(More Details...)
  7. Classifier, Screw, 12" X 12', Hazen Quin, 1.5 HP, W/screen,
    Stock Number: S733025
    Location: Chowchilla, CA
    Screw classifier, manufactured by Hazen Quin in Denver, Colorado. Approximately 12" diameter x 12' long screw...(More Details...)
  8. Compressor, Air, 150 HP, Atlas Copco, 125 PSI, Oil Free
    Stock Number: S738545
    Location: Timmins, ON, Canada
    Air compressor, manufactured by Atlas Copco, model number ZT 110, driven by 150 HP motor, oil free compressor. Rated for...(More Details...)
  9. Compressor, Air, 74 HP, Atlas Copco, 350 CFM, 132 PSI,
    Stock Number: S738544
    Location: Timmins, ON, Canada
    Air compressor, manufactured by Atlas Copco, Model number GA 55, driven by 73.8 HP motor, rated for 320 CFM, 132 PSI, 30...(More Details...)
  10. Concentrator, Krebs Spiral, Mdl GPX3/4, FRP, (4) Spirals
    Stock Number: S740703
    Location: Chowchilla, CA
    Krebs Spiral Concentrator system, including (4) spiral units with distributor. Model number GPX3/4, fiberglass construct...(More Details...)
  11. Conveyor, Belt, 30" x 70', Radial Stacker, Truss Frame
    Stock Number: C739938
    Location: Chowchilla, CA
    Radial stacker, measures approximately 30" wide x 70' long, constructed with 31" x 36" truss frame. ...(More Details...)
  12. Conveyor, Belt, 35" X 42', 304 S/st, Wire Mesh, Incline,
    Stock Number: C742230
    Location: Fort Meade, FL
    Goessling wire mesh belt conveyor, 35" wide X 42' long belt. Set up for 18-degree incline angle. Driven by 3 H...(More Details...)
  13. Conveyor, Belt, 36" X 4-mile, Overland Conveyor,
    Stock Number: D742389
    Location: East Coast
    Overland belt conveyor, 36" wide X 4-mile belt with 42" wide frame and 36" idlers, 66" deep truss. I...(More Details...)
  14. Crusher, Roll, 78" X 60", 2-Roll, FAM, (2) 350 HP, Primary
    Stock Number: S738503
    Location: Timmins, ON, Canada
    Double roll crusher, 78" diameter x 60" wide (2000 mm x 1500 mm) rolls, heavy duty teeth, manufactured by FAM,...(More Details...)
  15. Dryer, Belt, Grate, C/st, Buhler, 7' X 32', 2 Zones
    Stock Number: C742218
    Location: Fort Meade, FL
    Buhler grate dryer, rated for 500 degrees Fahrenheit, with (2) drying zones. Rated for 23,460 pounds per hour. Features ...(More Details...)
  16. Dryer, Rotary, 4' X 32', C/St, Skid Mounted, Dust Collector,
    Stock Number: C739844
    Location: South Carolina
    Rotary Dryer, 4' diameter X 32' long, carbon steel construction. Includes 2 tire, driven by 10 HP, 480V drive ...(More Details...)
  17. Dust Collector, Baghouse, 135 SF, Flex Kleen, Model 48 BVBS
    Stock Number: C740344
    Location: South Carolina
    Baghouse dust collector, manufactured by Flex Kleen, model # 48 BVBS. Includes pulse jet cleaning mechanisms. Unit has s...(More Details...)
  18. Dust Collector, Baghouse, 200 SF, Mikropul, Pulse Jet
    Stock Number: C740343
    Location: South Carolina
    Baghouse dust collector, manufactured by Mikropul. Includes pulse jet cleaning mechanisms. Unit has sixteen (16) bags ea...(More Details...)
  19. Dust Collector, Baghouse, 200 SF, Pulse Type, Sanco, 5 HP,
    Stock Number: S740771
    Location: Brisbane, CA
    Baghouse dust collector, manufactured by Sanco Air Tech. Unit includes five (5) pulse jet mechanisms. Chamber measures 4...(More Details...)
  20. Dust Collector, Baghouse, 40 SF, Mikropul, Pulse Jet
    Stock Number: C740342
    Location: South Carolina
    Baghouse dust collector, manufactured by Mikropul. Unit is a Pulse Jet type. Unit has nine (9) bags each measuring 36&qu...(More Details...)
  21. Feeder, Apron, 55" X 45', FAM, Hydraulic, Heavy Duty,
    Stock Number: S738504
    Location: Timmins, ON, Canada
    Heavy duty Apron feeder, measures 55" wide x approximately 45' long (1500mm wide x 15m long), manufactured by ...(More Details...)
  22. Feeder, Belt, 80" X 45', C/st, Hydraulic, Grizzly
    Stock Number: S738502
    Location: Kapuskasing, Canada
    Belt feeder, measures 80" wide x 45' long belt conveyor, rubber belt, 36" high sidewalls, with inspectio...(More Details...)
  23. Flotation Cell, Bank of Four, Wemco, Size 66 Standard
    Stock Number: C740612
    Location: Chowchilla, CA
    Wemco flotation cells, 4-cell bank, each cell measures 7' X 4' X 3'. Includes 10 HP, 1750 RPM, 220/440 V ...(More Details...)
  24. Furnace, Tilting, Melting, Lindberg, Gas, Zinc,
    Stock Number: S409494
    Location: Northern California
    Furnace, lindberg tilting type. Approximate inside dimensions 18" diameter x 24" deep tilting type with hand ...(More Details...)
  25. Hopper, 300 CF, Dump Hopper, C/st, 12' X 12' X 80", Dakota,
    Stock Number: C740634
    Location: Chowchilla, CA
    Feed hopper, 12' X 12' X 80" with inverted pyramid bottom, on angle iron stand, 10' X 10', disc...(More Details...)
  26. Jig, Enhancer, MSI Mining, Concentrator, Tank, Pilot
    Stock Number: C743130
    Location: Arizona
    Minerals Jig, manufactured by MSI Mining, Enhancer model. Rated for 750 pounds per hour or 12 pounds per minute. Serial ...(More Details...)
  27. Kiln, 8' X 92', Rotary, Metso, 2400 Deg F, Ported, 2013
    Stock Number: C740503
    Location: Fort Meade, FL
    Rotary Kiln, 8' diameter X 92' long, manufactured in 2013 by Metso, complete with gas burner, to 80mm BTU'...(More Details...)
  28. Lab, Emission Monitor, Opsis, Mdl AR600 UV DOAS
    Stock Number: C742233
    Location: Fort Meade, FL
    Opsis emission monitor, model AR600 UV DOAS (differential optical absorption spectroscopy) 100 ppm NOX, 100 ppm NO2 and ...(More Details...)
  29. Lab, LIBS Mineral Analyzer, MAYA 6060, LDS, Belt
    Stock Number: C742234
    Location: Fort Meade, FL
    LIBS (Laser Induced Breakdown Spectroscopy) online mineral analyzer, manufactured by Laser Distance Spectrometry, MAYA 6...(More Details...)
  30. Liner Handler, Mclellan, 4,000 Lb, Hydraulic, Sag Mill,
    Stock Number: S738559
    Location: Timmins, ON, Canada
    Mclellan liner handler, 4,000 lb. capacity, Model number 4K18X10. 5, Serial number 24-ZM-001, electro-hyrdaulically oper...(More Details...)
  31. Mill, Ball, 11.5' X 17', KVS, 1000 HP, Refurbished in 2013
    Stock Number: C742220
    Location: Fort Meade, FL
    11.5' diameter X 17' long ball mill, manufactured by KVS (Kennedy Van Saun), includes 1000 HP open winding syn...(More Details...)
  32. Mill, Ball, 13' X 21', Allis Chalmers, 2000 HP, R/L,
    Stock Number: S738509
    Location: Timmins, ON, Canada
    Allis Chalmers Svedala ball mill, 13' diameter x 21' long, rubber-lined mill, with Siemens-Allis 2,000 HP, 400...(More Details...)
  33. Mill, Ball, 16" X 48", Continuous, Rubber Liners, Quinn, 3 HP
    Stock Number: C743128
    Location: Arizona
    16" x 48" Ball Mill, manufactured by Quinn Process Equipment Company, continuous feed type, rubber lined. Driv...(More Details...)
  34. Mill, Ball, 18" X 24", Ceramic Lined, 5 HP
    Stock Number: C740413
    Location: South Carolina
    Ball Mill, 18" X 24", ceramic lined, Batch type that tilts for discharge. Inside dimensions: 16" X 18 1/2...(More Details...)
  35. Mill, Ball, 2' x 2'6", Paul O. Abbe, 8 CF, Dry Grind
    Stock Number: S742943
    Location: Hainesport, NJ
    Paul O. Abbe Ball Mill, appears to be Model 8-A, measures 24" diameter X 30" long, rated for 59 Gallon capacit...(More Details...)
  36. Mill, Ball, 3'9" x 4', Paul O. Abbe, 44 CF, 330 Gallon
    Stock Number: S742936
    Location: Hainesport, NJ
    Paul O. Abbe Ball Mill, appears to be Model 4-A, measures 45" diameter X 48" long, rated for 330 Gallon capaci...(More Details...)
  37. Mill, Ball, 3'9" x 4', Paul O. Abbe, 44 CF, Dry Grind
    Stock Number: S742935
    Location: Hainesport, NJ
    Paul O. Abbe Ball Mill, appears to be Model 4-A, measures 45" diameter X 48" long, rated for 330 Gallon capaci...(More Details...)
  38. Mill, Ball, 4' x 6', 50 HP, Rubber Lined, Continuous
    Stock Number: C743125
    Location: Arizona
    4' x 6' ball mill, complete with 50 HP motor on skid with guards, motor mount, sheath guard, take-ups. Rubber ...(More Details...)
  39. Mill, Ball, 5' X 6' Patterson, 30 HP, Steel Lined, Unused
    Stock Number: C742743
    Location: Nevada
    5' diameter X 6' long ball mill, manufactured by Patterson Industries, Type D, non-jacketed, with AR400 steel ...(More Details...)
  40. Mill, Ball, 7' x 5 1/2', 100 HP, Skid Mounted, Steel Liners
    Stock Number: C740611
    Location: Chowchilla, CA
    7' diameter X 5 1/2' long ball mill, includes 100 hp motor, 1180 RPM, 220/440 V, Frame 444T, and spare motor. ...(More Details...)
  41. Mill, Hammer, 18" Dia, Jacobson, Air Swept, 50 HP,
    Stock Number: S742030
    Location: Brisbane, CA
    Jacobson Air Swept Carbon Steel Hammer Mill, Model 17DF8, grinding chamber measures 18" diameter with 7" disch...(More Details...)
  42. Mill, Hammer, 18" Dia, Jacobson, Air Swept, 50 HP,
    Stock Number: S742028
    Location: Brisbane, CA
    Jacobson Air Swept Carbon Steel Hammer Mill, grinding chamber measures 18" diameter with 7" discharge. Include...(More Details...)
  43. Mill, Hammer, Jeffrey, 24" X 8", 40 HP, Swinging Hammers
    Stock Number: S740537
    Location: New Jersey
    Jeffrey Hammermill, includes 24-1/2" wide x 8-1/2" wide flange feed throat, leading to 24" wide grinding ...(More Details...)
  44. Mill, Hammer, Jeffrey, 36" X 36",Type B-3, Slag,
    Stock Number: C732538
    Location: Chowchilla, CA
    Hammer mill, 36" diameter x 36" wide grinding chamber, manufactured by Jeffrey, type B-3. 6" diameter sh...(More Details...)
  45. Mill, Hammer, Prater, Size 67H5R, C/st, Blue Streak,
    Stock Number: S738227
    Location: San Dimas, CA
    Prater hammer mill, Blue Streak Pulverizer, size 67H5R, carbon steel construction, inlet measures 7" x 7", 5&q...(More Details...)
  46. Mill, Hammer, West Salem, 200 HP, Pallet Recycling,
    Stock Number: C734512
    Location: Brisbane, CA
    Hammer mill, West Salem Machinery, Model number 2852BH, carbon steel, driven by 200 HP, 1165 RPM, 460 Volt, 3/60 hz moto...(More Details...)
  47. Mill, Mikro, 3TH, C/st, Screw Fed, 30 HP, Stirrup Hammers,
    Stock Number: S741960
    Location: San Dimas, CA
    Mikro 3TH grinding mill, hammer mill, carbon steel construction, 14" diameter x 14" wide rotor with approx. 16...(More Details...)
  48. Mill, Sag, 18' X 10-1/2', Fuller, 1500 HP, R/L,
    Stock Number: S738506
    Location: Timmins, ON, Canada
    SAG mill, 18' diameter x 10-1/2' long, manufactured by Fuller, rubber-lined, driven by 1500 HP, 4160 volt, 119...(More Details...)
  49. Mill, Sag, 36' X 20.5', Metso, 20,000 HP, Unused
    Stock Number: C740224
    Location: Europe
    Sag Mill, 36' diameter X 20.5 long (11m X 6.2m). Manufactured by Metso in 2007, Unused and never installed. Complet...(More Details...)
  50. Mixer, Agitator, 0.43 HP, Lightnin, S/st, Mdl ND-1, (2)
    Stock Number: C740625
    Location: Chowchilla, CA
    (2) Mixer, Lightnin' agitator, 0.43 HP, 115/230 V, 1750 RPM, model ND-1, serial number 7808471, complete with stain...(More Details...)
Page
per page

1-50 of 85

Set Ascending Direction