Dryer, Dryer System, Rotary, Aeroglide, (2) 13' Dia x 60' L, Triple Pass, Stainless Steel, 151,000 Lbs/Hr, 2008, #5992047

Location:Southeast United Sates

Available quantity:1

Description

Aeroglide complete rotary dryer system, manufactured in 2008, rated at 151,000 lbs/hr capacity. System consists of two 13' diameter x 60' long triple-pass rotary drum dryers constructed of 409 stainless steel, with a cooling drum, natural gas/propane-fired burners, cyclone separation equipment, exhaust fans, ductwork, structural steel supports, and electrical controls. Each triple-pass dryer is designed to continuously lift and shower material through the moving heated air stream to facilitate moisture removal. The system includes rotary drums supported on trunnions with 150 HP drum drive motors, natural gas burners rated at 68 MMBTU/hr with an 8:1 turndown ratio, and associated combustion controls. The exhaust system includes a main discharge cyclone measuring 3.66 meters in diameter, eight secondary multicyclones per dryer measuring 1.07 meters in diameter each, and exhaust fans driven by 400 HP motors. Additional equipment includes a cooling exhaust fan driven by a 100 HP motor, exhaust stack extending approximately 37 meters above grade, interconnecting ductwork, and supporting steel structuresRated volumetric airflow is 30.68 m³/sec. Maximum thermal output is specified at 42,200,000 kJ/hr. Complete system includes dryer drives, motors, burners, fans, controls, and associated equipment. Previously used for processing wet distillers grains.

Specifications

Stock Number5992047
ManufacturerAeroglide
Year2008
Previous UseGrain wet distillers
Exhaust Fan Motors(2) 400 HP
Drum Drive Motors(2) 150 HP
Burner Turndown8:1
Burner Rating68 MMBTU/hr (per-burner basis to confirm)
Material of Construction409 Stainless Steel
Dryer ConfigurationTriple-Pass Rotary Drum
Drum Length60' Each
Quantity2 Rotary Dryers
Capacity151,000 lbs/hr (Reported System Rating)
BasisAs-is, Where-is

General Information

Aeroglide is an established manufacturer of industrial thermal processing equipment, including drying and cooling systems for food, agricultural, and bulk material processing applications. Triple-pass rotary dryers use concentric drying passages within a rotating drum to move material through multiple stages of heated airflow. Internal lifting flights distribute the material through the air stream, promoting heat transfer and moisture evaporation. These systems are commonly used in ethanol production, distillers dried grains with solubles (DDGS) processing, animal feed manufacturing, agricultural byproduct drying, and other high-volume bulk solids applications. Integrated cooling equipment can reduce product temperature following drying, while cyclone and multicyclone systems separate entrained particulate matter from the exhaust stream.