Dryer, Rotary Steam, Drying Solutions, 5.9' Dia x 48.4' L, Stainless Steel, 1,500 Lbs/Hr, 2009, #5992046

Location:Iowa
Available quantity:1
Description
Drying Solutions, Inc. stainless steel rotary steam dryer system, manufactured in 2009, rated for 1,500 lbs/hr feed capacity with an evaporation rate of 900 lbs/hr. The system features a 5.9' diameter x 48.4' long (1,800 mm x 14,750 mm) rotary drum constructed of 304L stainless steel, with internal cup flights arranged around the drum perimeter and an open center section. Designed for co-current, single-pass superheated steam drying, the system was configured for 65% inlet moisture and 5% outlet moisture at the rated feed rate. Conveying airflow is approximately 1,973 ACFM at 266°F–288°F, with a maximum specified inlet temperature of 680°F. Includes a natural gas-fired burner rated at 7.3 MMBTU/hr, hot-air heat exchanger, steam or water injection provisions, cyclone separator, vertical condenser, blower, 60 HP conveying fan, 40 HP drum drive, drag conveyor, and three screw conveyors. Complete electrical control system includes PLC, Advantech touchscreen HMI, motor starters, and four variable frequency drives (VFDs) housed in control cabinets. Electrical service is rated at 200 amps, 460V. The system was previously used for drying soybean meal. Overall installed system footprint is approximately 65.4' L x 36.4' W x 16.4' H.
Specifications
| Stock Number | 5992046 |
| Manufacturer | Drying Solutions, Inc. |
| Year | 2009 |
| Diameter | 5.9' (1,800 mm) |
| Drum Length | 48.4' (14,750 mm) |
| Feed Capacity | 1,500 lbs/hr |
| Evaporation Rate | 900 lbs/hr |
| Material of Construction | 304L Stainless Steel |
| Dryer Configuration | Co-Current, Single-Pass, Superheated Steam |
| Inlet / Outlet Moisture | 65% / 5% (specified operating basis) |
| Burner Rating | 7.3 MMBTU/hr, Natural Gas |
| Electrical Service | 460V, 200 Amps |
| Previous Use | Soybean Meal Drying |
| Basis | As-is, Where-is |
General Information
Drying Solutions, Inc. is associated with industrial drying equipment and engineered thermal processing systems used for moisture removal from bulk materials. Rotary steam dryers combine rotating drum movement, internal material-lifting flights, and controlled thermal airflow to promote contact between wet material and the drying medium. Co-current configurations introduce material and the drying stream in the same direction, while cyclone separation and downstream collection equipment help manage entrained solids. These systems are used in agricultural processing, animal feed production, biomass processing, food ingredient manufacturing, and other bulk-solids drying applications. Equipment configuration, temperature control, residence time, and moisture removal requirements vary according to the characteristics of the material being processed.










