+1-415-467-3400

Votator

22 Item(s)

per page

Set Descending Direction
  1. Votator, 10" X 60", Single, Girdler, S/st, Steam, 7.5 HP,

    Stock Number: S717310

    Votator, Girdler, 10" diameter x 5' long, stainless steel tube, single carbon steel jacket. Rated 250 PSI @ 375 internal and 150 PSI @ 375 jacket. 7-1/2 HP Reeves vari-speed drive (420 - 140 RPM).
  2. Votator, 10" X 60", Single, Girdler, S/st, Steam, 7.5 HP,

    Votator, 12" X 13', Single, Armstrong, S/st, Steam, 1.5 HP,

    Stock Number: C717200

    Armstrong votator 12" x 13' stainless steel, 300 PSI tube, 150 PSI on jacket. Unit has 1-1/2 HP gear head motor, chain drive with starter switch and is horizontal design.
  3. Votator, 12" X 13', Single, Armstrong, S/st, Steam, 1.5 HP,

    Votator, 14" X 48", Single, Girdler, Steam, 5 HP,

    Stock Number: S717100

    Votator, Girdler, model 43917, 14" diameter x 48" long scraped surface heat exchanger, single barrel, serial number 60475-3. Barrel is rated 250 PSI internal, 150 PSI jacket, barrel serial number B284. Votator mounted on stand with 5 HP vari-speed (350/ 117 rpm) motor.
  4. Votator, 14" X 48", Single, Girdler, Steam, 5 HP,

    Votator, 4" x 48", Single, Mdl M41F, Chemetron

    Stock Number: S719770

    Chemetron votator model M41F, 4" x 48", stainless steel rotor with nickel barrel. Unit is single barrel, unitized on frame with stainless steel cabinet cover. Serial number 7949, complete last run on ammonia.
  5. Votator, 4" x 48", Single, Mdl M41F, Chemetron

    Votator, 6" X 24", Double, Cherry Burrell, Glycol, 5 HP,

    Stock Number: S719500

    Votator, Cherry Burrell, model 2C24A, 6" diameter x 24" long scraped surface heat exchanger, twin barrel. Barrel serial numbers A4349 & 50. Barrels rated for 400 PSI @ 375 deg. F. and 150 PSI @ 175 deg. F. Jackets. Cherry Burrell votator serial number 35796VA.
  6. Votator, 6" X 24", Double, Cherry Burrell, Glycol, 5 HP,

    Votator, 6" x 24", Single, Chemetron, S/st, Steam, 5 HP,

    Stock Number: S719720

    Chemetron votator, model 1C624L, 6" x 24", stainless steel, driven by 5 HP US vari drive, 220/440 volt with speed range of 97 RPM min to 867 RPM max, unitized on frame, complete with some controls, Serial number 70108V. Unit rated at 250 PSI @ 375 deg. F. internal, jacketed for 150 PSI @ 375 deg. F. Mounted on stand. Appears to be in very good condition. Last run at tomato processing plant as a steam heated cooker. Serial number A2669 (1970). NB# #3669.
  7. Votator, 6" x 24", Single, Chemetron, S/st, Steam, 5 HP,

    Votator, 6" X 24", Single, Cherry Burrell, Steam, Thermutator,

    Stock Number: S719730

    Cherry Burrell thermutator, 6" diameter x 24" barrel, model 624DE, scraped surface heat exchanger. Designed for 400 PSI internal at 400 degrees, 200 PSI jacket at 400 degrees, complete with stainless steel sanitary cabinet, HP drive motor, 2" inlet and outlet, last used on peanut butter. Condition excellent. Serial number 111-1.
  8. Votator, 6" X 24", Single, Cherry Burrell, Steam, Thermutator,

    Votator, 6" X 48", Double, C-B, S/St, Ammonia, 20 HP,

    Stock Number: Z719210

    Cherry Burrel votator, model 648, with two barrels, for ammonia, all stainless steel. Unit complete with two 10 HP 230/460 volt motor to v-belt drives. All electricals are included, but may need some reconditioning. The overall dimensions are 6' wide x 7'6" long x 7' high, 17,500 reconditioned, and Serial number 57.
  9. Votator, 6" X 48", Double, C-B, S/St, Ammonia, 20 HP,

    Votator, 6" X 48", Triple, Chemetron, S/st, Ammonia, 25 HP,

    Stock Number: S719010

    Chemetron votator, model FV183A, scraped surface heat exchanger, triple barrel units measuring 6" x 48", stainless steel chrome plated barrels, equipped with a 25 HP V-belt motor drive, rated 250 PSI internal, jacketed for 150 PSI, last running pineapple juice concentrate, good condition. Set up with ammonia expansion.
  10. Votator, 6" X 48", Triple, Chemetron, S/st, Ammonia, 25 HP,

    Votator, 6" x 48", Triple, Crepaco, S/st, Ammonia, 10 HP,

    Stock Number: Z719000

    Scraped surface votator, heat exchanger, 6" x 48", 3 tube, Creamery Package, stainless steel with nickel clad barrels, rated at 150 PSI internal, 250 PSI jacket, ammonia accumulators, driven by 10 HP motor per barrel. Unitized. Serial number HP. 3.1315.
  11. Votator, 6" x 48", Triple, Crepaco, S/st, Ammonia, 10 HP,

    Votator, 6" X 48", Triple, Girdler, S/st, Ammonia, 25 HP,

    Stock Number: S719020

    Votator, scraped surface heat exchanger, Girdler, model FV183A, 3 barrel units measuring 6" x 48", stainless steel chrome plated barrels. The unit is set up for direct expansion ammonia. Votator is equipped with a 25 HP, 220/440V, 66.2/33.1 amps, 865 RPM, 3/60Hz motor through V-belt drive. Serial number 9152. Previously used on orange concentrate.
  12. Votator, 6" X 48", Triple, Girdler, S/st, Ammonia, 25 HP,

    Votator, 6" X 60", Triple, Crepaco, S/st,

    Stock Number: S735455

    Votator, 6" diameter x 60" long. Triple barrel all stainless steel construction, manufactured by Creamery Package, serial number HP-3-536-S, includes (2) set of drives to drive the scrape surface agitators, 2" diameter feed inlets.
  13. Votator, 6" X 60", Triple, Crepaco, S/st,

    Votator, 6" X 72", Double, Girdler, S/st, Steam, 25 HP,

    Stock Number: S718340

    Girdler/votator 6" x 72" scrape surface heat exchanger, twin barrell model FV183W, last used on tomato paste, serial #9313, unit new in 1960, driven by a single 25 HP motor to belt drives, tubes rated for 400 PSI @ 400 deg. F., jacket rated for 150 PSI @ 400 deg. F., units were new in 1960, tubes serial #A444 and A347, fair condition.
  14. Votator, 6" X 72", Double, Girdler, S/st, Steam, 25 HP,

    Votator, 6" x 72", Single, Contherm, S/st,

    Stock Number: C718623

    Votator, scraped surface, vertical heat exchanger, Contherm, 6" x 72", single barrel, (9 sq.ft.), 15 HP V-belt drive. Rated at 300 PSI internal, jacket at 250 PSI @ 650 deg. F, 100 PSI @ -30 deg. F, CIP.
  15. Votator, 6" x 72", Single, Contherm, S/st,

    Votator, 6" X 72", Single, Delaval, S/st, Vert, 7.5 HP, (4),

    Stock Number: S718670

    (4) Delaval / Contherm contherm scraped surface heat exchangers, 6" x 72", stainless steel, (4) nickel barrels, 7.5 HP, 230/460V, 60Hz motors. Mounted on mild steel frame. Last used by heublein processing powdered/cooling drink mixes. Separate barrel serial numbers H809NPC, H815NPC, H807NPC, H827NPC. New '74/75.
  16. Votator, 6" X 72", Single, Delaval, S/st, Vert, 7.5 HP, (4),

    Votator, 6" X 72", Single, Girdler, S/st, 7.5 HP,

    Stock Number: C718690

    Girdler votator, Model FV1S100, scraped surface heat exchanger, 6" x 72", single barrel, with barrel being stainless steel chrome plated. Equipped with 7.5 HP gearhead motor, on stand with 2" feed pump and drive. Serial number 61101.
  17. Votator, 6" X 72", Single, Girdler, S/st, 7.5 HP,

    Votator, 6" x 72", Single, S/st, Chemetron, Jkt, (2)

    Stock Number: S718651

    (2) Votator, Chemetron, 6" x 72", rated at 400 PSI internal @ 375 deg. F., jacket rated for 150 PSI internal @ 375 deg. F. New 1965. Unit is stainless steel barrel, feed and discharge, unitized on skid with 30 HP 1750 RPM 230/460V main drive motor, V-belt to gearbox. Mfg Serial number A1147, NB# 2101. Good condition.
  18. Votator, 6" x 72", Single, S/st, Chemetron, Jkt, (2)

    Votator, 8" X 36", Single, Groen, S/st, Vert, 10 HP, (3)

    Stock Number: S717400

    (3) Votator, scraped surface, Groen Particon-6, vertical heat exchanger, 8" diameter stainless steel cylinder 36" high (6 sq. ft. heat transfer surface). Cylinder jacketed for 150 PSI @ 366 deg. F., 250 PSI @ 115 deg. F. 10 HP vari volume power pack. Transfer cylinder. The hydraulic power pack, control panel, temp. Controller, rotor RPM indicator and product inlet temperature gauge are mounted on a stainless steel portable stand. 1989. Serial numbers 44681-5, NB# 136236; 46681, NB#136237; 46681-3, NB# 136235.
  19. Votator, 8" X 36", Single, Groen, S/st, Vert, 10 HP, (3)

    Votator, Chemtron, 6" x 72", 2 Tube, S/st, Mdl FV-2A

    Stock Number: S716407

    Votator, scrape surface heat exchanger, model FV-2A, 6" x 72" with two stainless steel chrome plated barrels. The unit is set up for direct expansion ammonia, rated 250 PSI internal, 150 PSI on jacket, each barrel is equipped with a 7.5 HP gear head motor drive, manufactured in 1966, Serial number 66-393, good condition.
  20. Votator, Chemtron, 6" x 72", 2 Tube, S/st, Mdl FV-2A

    Votator, Shortening System, Girdler & Refrig. Compressor,

    Stock Number: S716550

    Votator shortening system, with (2) Girdler votators and (1) refrigeration compressor. The A-unit is a Girdler model S51F with 6" diameter x 24" long single barrel. Serial number 8679. Driven by 10 HP motor and V-belt. The B-unit is a Girdler model 41553 with 6" diameter x 42" long twin barrels. Serial number 8680. Driven by 10 HP motor and reducer. Refrigeration compressor is carrier model 5H40-149, rated 235 PSI @ 300 deg. F. Driven by 20 HP motor. Carrier serial number 87F11830W.
  21. Votator, Shortening System, Girdler & Refrig. Compressor,

    Votator, Shortening System, Girdler, & Refrig Compressor,

    Stock Number: S716560

    Votator shortening system, with (2) Girdler votators and (1) refrigeration compressor. A-unit is Girdler model S51B with 6" diameter X 42" long. Single barrel, 7 sq. ft. Serial number 9627. Driven by 5 HP V-belt motor. B-unit is Girdler model 41553, with 6" diameter X 42" long. Twin barrels, Serial number 9628. Driven by 7.5 HP motor. 5 sq. ft. each, rated 425 PSI @ 650 deg. F. Barrels have Serial numbers S168 and B129. (previously had refrigeration Compressor P&R type 150 driven by 7.5 including 1 HP brine pump and 50 sq. ft. heat exchanger).
  22. Votator, Shortening System, Girdler, & Refrig Compressor,

    Votator, Shortning System, S-W, Vert, 12,000#/HR, Caus, (2)

    Stock Number: S716500

    (2) Struthers Wells caustic refining/mixing system, 12,000 pounds per hour capacity, vertical, each with 10" x 62" static mixing barrels with internal porcupine mixing element with plate baffles, jacketed, with a 7-1/2 HP vari-speed top mounted drive on each, and each with 112" x 54" mixing barrel, with a porcupine internal mixing element with static plates, equipped with a 10 HP directly connected gear head motor drive, electrical control panel, system designed by Sullivan Systems. Condition good.

22 Item(s)

per page

Set Descending Direction

Please wait...