+1-415-467-3400

Unloader

13 Item(s)

per page

Set Descending Direction
  1. Unloader, Bag Break Station, Ribbon Mixer, Hopper, S/st,

    Stock Number: L740957

    Bag unloading station with stainless steel ribbon mixer. Includes large HAF bag break station with integrated dust collection system for introduction of powder material. Complete with approximately 75-cubic foot capacity, double ribbon, driven by 20 HP gearhead motor through chain and sprocket. Trough measures 40" wide X 96" long and includes end bottom discharge on each side (one outlet is currently blanked). Also includes large stainless steel feed hopper with heavy duty pneumatic gate valve. Previously used in bakery mix application.
  2. Unloader, Bag Break Station, Ribbon Mixer, Hopper, S/st,

    Unloader, Bag, Dump, C/st, W/dust Coll & Blower,

    Stock Number: S710534

    Unloader, dump station, bag, carbon steel with dust collector. Unloading station complete with overhead dust collector attached. Unit has grate covered hopper for dumping 25-100 lb. Bags. Unit measures 4' x 4' x 8' high and is complete with 2' x 3' dump chamber. Unit has 1-1/2 HP 230/460V draft blower, 12" diameter center bottom discharge.
  3. Unloader, Bag, Dump, C/st, W/dust Coll & Blower,

    Unloader, Bag, Dump, Vacumax, C/st, Dust Collector, (2)

    Stock Number: S710533

    (2) Vac-U-Max unloader, carbon steel, bag, with dust collector, Vac-U-Max bag unloading station complete with overhead dust collector attached. Unit has grate covered hopper for dumping 25# to 100# bags. Unit measures 6' high x 3' wide x 2'. Unit less draft blower for baghouse system.
  4. Unloader, Bag, Dump, Vacumax, C/st, Dust Collector, (2)

    Unloader, Bag, S/st, HAF, Bag Break, Dust Collector, (4)

    Stock Number: S740518

    (4) HAF Equipment Model "40 40 Bag Break" Stations, "Moovinator," all stainless steel construction, complete with dust collection equipment. Dump area measures 40" x 20" and includes hinged lid and grate cover. Dust collection bags & cages are enclosed and mounted horizontally in back of hopper, includes (8) cages (less bags) and (4) pulse jet cleaning mechanisms. Complete with Cincinnati Fan blower, driven by 5 HP motor. Bag break stations were last used at food processing facility and are in very good condition.
  5. Unloader, Bag, S/st, HAF, Bag Break, Dust Collector, (4)

    Unloader, Drum, Graco, 15/60 GPM, S/st, W/mixer (2)

    Stock Number: C738211

    (2) Graco 55 gallon drum unloader. Unit has air powered mixer, max PSI 100 and Graco diaphragm pump rated for 15-60 GPM and air cylinder. Unit rated fro 100 PSI, has stainless steel contact parts. Unit is part number 23149 and in good condition.
  6. Unloader, Drum, Graco, 15/60 GPM, S/st, W/mixer (2)

    Unloader, Drum, Graco, S/st, 6 GPM, Mdl C92V, 100 PSI

    Stock Number: S737663

    Drum unloader, manufactured by Graco, includes model number C92V pump, pneumatically driven, rated for max capacity of 6 GPM (22 liters/min), 100 max PSI, unitized on stainless steel frame, measuring 42" x 24" x 64" high. Good condition.
  7. Unloader, Drum, Graco, S/st, 6 GPM, Mdl C92V, 100 PSI

    Unloader, Drum, Material Transfer, S/st, Portable, Lift,

    Stock Number: L737348

    Drum/bin lift dumper/unloader, portable, manufactured by Material Transfer & Storage Inc., all stainless steel construction, loading section includes (2) 2" diameter X 26" long stainless steel welded pipes, on 9" spacing, includes slight manual adjustment to secure drum. Drum will connect to stainless steel discharge hopper with butterfly valve, 8" diameter discharge, hopper also includes (2) 2-1/2" diameter openings with pneumatic pulse-jet mechanisms and stainless steel flexible hose connecting openings. Complete with controls for seal/unseal, reverse/forward pivot, open/close valve, vibrator on/off, etc. Serial number 389-AC. Unit is unused in excellent condition.
  8. Unloader, Drum, Material Transfer, S/st, Portable, Lift,

    Unloader, Drum, Material Transfer, S/st, Tilt, Dump,

    Stock Number: L737347

    Drum lift/dumper/unloader, manufactured by Material Transfer & Storage Inc. , all stainless steel construction. Includes drum platform with rollers, mechanically operated hopper to connect to the top of drum, hopper has 8" diameter opening with torque-mate 890 series pneumatic actuator butterfly valve. Drum is rolled into platform section and discharge hopper would be mechanically lowered and locked to top of drum. Includes hydraulic ram to lift and tilt product inside drum into desired location. Includes controls for pack seal, raising/lowering, forward/reverse pivoting, chute vibrator, etc. System is pharmaceutical grade and in excellent condition. Serial number 5063-AR-1B. Unused.
  9. Unloader, Drum, Material Transfer, S/st, Tilt, Dump,

    Unloader, Pneumatic, Gas Blower, R6P355A

    Stock Number: S738182

    Pneumatic unloader, includes Gast blower, model R6P355A, driven by 4-1/2 HP motor, 190-220/380 V, 2850 RPM, 50Hz. Unloader includes (2) 2-1/2" diameter, flexible suction hoses, with 4" diameter discharge hose. Unitized on frame with casters and include start/stop control.
  10. Unloader, Pneumatic, Gas Blower, R6P355A

    Unloader, S/st, 1/4 HP, Pneumatic, Hopper, Smoot

    Stock Number: A736009

    Unloader, stainless steel construction, manufactured by Smoot Co. (Kansas City, KS), complete with 24" x 36" x 44" stainless steel hopper with 7-1/2" diameter infeed leading to rotary air lock valve. Product goes through rotary lock valve driven by 1/4 HP motor, 230/460V, 1735 RPM through belt drive,and then it is pneumatically conveyed by sutorbilt Model 3LP blower driven by 5 HP motor, complete with control panel. Mounted on carbon steel stand.
  11. Unloader, S/st, 1/4 HP, Pneumatic, Hopper, Smoot

    Unloader, Supersack, Flexicon, Auger Discharge,

    Stock Number: A740501

    Flexicon Supersack bulk bag unloading station. Includes adjustable frame with cantilevered I-Beam. Designed for maximum capacity of 3,200 lbs. Accommodates bulk bags ranging in height from 36" to 72" with a maximum width of 36" at bag seam and 48" at widest point when full. Bag discharges into pyramid-shaped stainless steel hopper with clamped lid after which product is discharged through 3-1/2" X 30' long Flexicon screw conveyor. Frame includes attached stainless steel dust collector. Very good condition.
  12. Unloader, Supersack, Flexicon, Auger Discharge,

    Unloader, Supersack, Spiroflow, S/st, 5 HP

    Stock Number: A740645

    Spiroflow bulk bag/supersack unloader, model # FSC 415/-B. System includes bulk bag lifting frame and tensioning frame. Includes bag bottom massaging system to promote flow of materials that have settled overt time. Bags are unloaded via 4-1/2" diameter X 18' long stainless steel screw conveyor. Conveyor driven by 5 HP, 230/460V, 3/60Hz motor. Screw has an operating speed of 580 rpm. Includes start/stop controls and weight display.
  13. Unloader, Supersack, Spiroflow, S/st, 5 HP

    Unloader, Supersack, Sutorbilt, 11' High, Pneumatic, 10 HP

    Stock Number: C740238

    Supersack unloader, complete with frame work set up at approximtely 11' high and Sutorbilt 10 HP blower to pneumatically convey material from Supersacks. Inlcudes overhead jooks to secure bags and discharge chute with rtotary airlock valve. Valve feeds to discharge pipe that is connected to Sutorbilt model GAGHBPA blower with Teco 10 HP, 480V, 1170 RPM, 3/60Hz, 13 amp motor. Previously used in minerals application. Good condition.

13 Item(s)

per page

Set Descending Direction

Please wait...