+1-415-467-3400

Carbon Steel Tank


Items 1 to 10 of 41 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. Tank, 45,000 Gallon, C/st, Epoxy Lined, Horizontal, (4)

    Stock Number: C739104

    (4) Horizontal 45,000 gallon storage tanks, carbon steel construction with food grade epoxy coating. Complete with internal stainless steel serpentine. Includes (2) manways with covers and 3" diameter fittings. Previously used at juice processing facility.d on mild steel frame. 10' diameter Previously used at juice processing facility.
  2. Tank, 45,000 Gallon, C/st, Epoxy Lined, Horizontal, (4)

    Tank, 10,000 Gallon, C/st, 14 PSI, Epoxy Lined, DT/DB

    Stock Number: S740382

    Tank, approximately 10,000 gallon capacity, manufactured by Modesto Custom Fabrication. Unit has carbon steel contacts with internal epoxy lining. Tank measures 11'6" diameter X 12' straight side with 2' dish top and bottom. Rated for 14 PSI @ 32 degrees Fahrenheit, internal. Includes 4" center-bottom outlet. Previously used as brine tank in an Research and Development facility. New in 2008. Very good condition.
  3. Tank, 10,000 Gallon, C/st, 14 PSI, Epoxy Lined, DT/DB

    Tank, 6,000 Gallon, C/st, Vertical, Fructose, Epoxy, Jkt,

    Stock Number: S737951

    Tank, approx. 6,000 gallon capacity, measures 9'10" diameter x 12' high, carbon steel tank with epoxy coating internally, 3" diameter side bottom outlet. Complete with electrically traced heating jacket/blanket that wrapes around the outside of the tank and covered by insulation. Previously used as a fructose syrup storage tank. Includes stainless steel piping. Good condition.
  4. Tank, 6,000 Gallon, C/st, Vertical, Fructose, Epoxy, Jkt,

    Tank, 5,400 Gallon, C/St, FT/DB, 112" X 128", Coils

    Stock Number: S740048

    Carbon steel 5,400 gallon tank measuring 112" diameter x 128" straight side with flat top and dish bottom. Unit includes heating/cooling coils, 2" top inlet and 24" x 28" manway with door. Unit has 3" diameter center bottom discharge, mounted on (4) carbon steel legs. No nameplate data.
  5. Tank, 5,400 Gallon, C/St, FT/DB, 112" X 128", Coils

    Tank, 2,400 Gallon, C/St, 126 PSIG, Roy Hansen, Horiz

    Stock Number: C738977

    Carbon steel horizontal 2,400 gallon tank measuring 6'6" diameter x 10 long, mfg by Roy Hansen manufactured in 1983 for hot water service. Unit is insulated, rated for 126 PSIG @ 250 deg f, mounted on saddles. Tank has a shell thickness of 0.347 and a head thickness of 0.325. Unit was last used as a hot water surge tank, serial number 234088.
  6. Tank, 2,400 Gallon, C/St, 126 PSIG, Roy Hansen, Horiz

    Tank, 1,300 Gallon, C/st, 7' Dia, 300 PSI @ 200 Deg F,

    Stock Number: S733982

    Spherical pressure tank, 1300 gallon, carbon steel, rated for 300 PSI @ 200 deg. F. Unit measures 7' od with. 484" thick shell complete with stand for support. Vessel manufactured by Southwest Welding and Manufacturing Co., previously used for nitrogen storage. Unit has underwriters code stamp, manufacturers serial number 8373, W.O.N.E-5900, manufactured new 1957.
  7. Tank, 1,300 Gallon, C/st, 7' Dia, 300 PSI @ 200 Deg F,

    Tank, 1,000 Gallon, C/st, 4' x 10', DT/CB, Agit, 3/4 HP

    Stock Number: S734069

    Tank, 1,000 gallon, carbon steel mixer tank for viscous paste products. Unit measures 4' diameter x 10' straight side with 70 deg cone bottom to 6" diameter discharge. Unit mounted on legs with discharge at 23" off floor. Unit has slow sweep single balde agitator with 3/4 HP, 220/440V gearhead drive with V-belt to jackshaft drive. Unit is closed top with 4" and 2" flanged top fittings and 17" top manway. Tank last used as surge / mix tans for wallboard paste product.
  8. Tank, 1,000 Gallon, C/st, 4' x 10', DT/CB, Agit, 3/4 HP

    Tank, 650 Gallon, C/st, 58" X 60", SIGht Glass,

    Stock Number: Z696265

    Tank, 650 gallon, steel, 58" x 60", with site glass.
  9. Tank, 650 Gallon, C/st, 58" X 60", SIGht Glass,

    Tank, 600 Gallon, C/st, 4' x 6', DT/CB, Agit, Less Drive

    Stock Number: S734070

    Tank, 600 gallon, carbon steel mixer tank for viscous paste products. Unit measures 4' diameter x 6' straight side with 70 deg cone bottom to twin 7" diameter discharges. Unit mounted on legs with discharge at 19" off floor. Unit has slow sweep single blade agitator with jackshaft drive, less drive motor. Unit is closed stop with 2 @ 4" and 1 @ 2" flanged top fittings and 18" top manway. Tank last used as surge/ mix tank for wallboard paste product.
  10. Tank, 600 Gallon, C/st, 4' x 6', DT/CB, Agit, Less Drive

    Tank, 550 Gallon, C/st, 4' X 6'6", DT/SB

    Stock Number: S696290

    Tank, 550 gallon, carbon steel, 4' diameter x 6-1/2' straight side, with flat bolt on cover, (3) 1-1/2" threaded inlets, slope bottom to 4" side bottom discharge, on 3' legs, wall thickness is. 107.

Items 1 to 10 of 41 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction

Please wait...