+1-415-467-3400

Gear Pump

14 Item(s)

per page

Set Ascending Direction
  1. Pump, Gear, 15 HP, 2", Mdl L125, Viking,

    Stock Number: S615102

    Viking gear pump, 2" x 2", model L-125, serial number 1948543. Unit is carbon steel contact parts, driven by 15 HP, 880 RPM, V-belt drive motor, 220/440 volt. Pump is complete with 2" pressure relief by-pass valve.
  2. Pump, Gear, 15 HP, 2", Mdl L125, Viking,

    Pump, Gear, 10 HP, 3"

    Stock Number: S615103

    Gear pump, 3" stainless steel inlet/outlet, flanged, driven by 10 HP us vari drive motor, 230/460V with 195 to 780 RPM.
  3. Pump, Gear, 10 HP, 3"

    Pump, Gear, 10 HP, 3", Mdl K125, Viking, (2)

    Stock Number: S741217

    (2) Viking internal gear pump, model number K125, Universal Mag drive pump, 3" diameter feed, 2" diameter outlet, 6" diameter impeller. Driven by 10 HP, 230/460V, 1770 RPM, 3-phase, 60-cycle motor thru gearbox with 17.08 to 1 ratio. Unitized on mild steel frame. Serial number on one is 10767290. Last used at food processing facility.
  4. Pump, Gear, 10 HP, 3", Mdl K125, Viking, (2)

    Pump, Gear, 5 HP, Mdl QR124, Viking,

    Stock Number: S615150

    Pump, Viking, model QR124, Serial number 1513007, complete with Reeves vari-speed main explosion proof motor drive, 5 HP 220/440 volt. Pump is V-belt driven, 4" diameter inlet/outlet directly manifolded to a Hayward Duplex inline strainer system, rated at 200 PSI, complete with diversion valving and carbon steel contact parts. Hayward strainer meausure approx. 10" diameter x 18" straight side. Unit is complete mounted on portable stand. Pump is complete with pressure relief valve mounted on face plate.
  5. Pump, Gear, 5 HP, Mdl QR124, Viking,

    Pump, Gear, 5 HP, C/st, 1.5", Mdl HL4225D, Viking,

    Stock Number: S733090

    Pump, gear, Viking model HL4225D, 1.5", 3 HP, carbon steel, direct drive 1170 RPM motor is 230/460V, unitized on base. Pump has pressure relief bypass valve, threaded in/out, serial number FV50.
  6. Pump, Gear, 5 HP, C/st, 1.5", Mdl HL4225D, Viking,

    Pump, Gear, 2 HP, S/st, Micro, Mdl OCGA,

    Stock Number: S739563

    Stainless steel Micro gear pump. Unit is model O/C GA-T23, has 1/4" inlet and outlet. J12KSE, with 2 hp, 208/230/460 volt, 3 phase, 3450 rpm motor. Unit was mfg new 03/08, serial number 1397958.
  7. Pump, Gear, 2 HP, S/st, Micro, Mdl OCGA,

    Pump, Gear, 1.5 HP, 2", S/st

    Stock Number: S734261

    Stainless steel 1.5 HP gear pump, model F7D917. Unit has 2" in/out, 220V, 1720 RPM. Is on base with wheels.
  8. Pump, Gear, 1.5 HP, 2", S/st

    Pump, Gear, 1.5 HP, C/st & Bronze, 1.5", Viking

    Stock Number: S740843

    Pump, gear, Viking model K32, 1.5" Inlet & outlet , carbon steel/bronze rotor,1.5 HP 1740 RPM motor is 230/460V, unitized on base. Pump has pressure relief bypass valve, threaded in/out, serial number1431864.
  9. Pump, Gear, 1.5 HP, C/st & Bronze, 1.5", Viking

    Pump, Gear, 1 HP, S/st, Zenith, B900, Metering,

    Stock Number: S741125

    Zenith B900 Series gear metering pump. Discharge pressure to 300 to 1000 PSI, Viscosity Range: 1 to 100000 cp, construction 400 series stainless steel, 1 Hp, 460 V, speed range 0 to 355 RPM with variable speed controller, model VFD007B43A, Gear Pump Head unit is configured for a maximum of 0.05 to 30 cc/rev. which will deliver a flow up to 27,000 cc/min, (7 gpm) part 311-90030-0000-0 includes a Graco Viscon HP high output fluid heater, model 245870, series AO6A, 480 VAC single phase, 4000 watts, 8.30 amps. Manufactured July 2006. Maximum fluid working pressure 7250 PSI (500 bar, 50 MPa).
  10. Pump, Gear, 1 HP, S/st, Zenith, B900, Metering,

    Pump, Gear, 1/2 HP, S/st, Micro, Mdl 142-000-110,

    Stock Number: S739564

    Stainless steel Micro gear pump. Unit is model 142-000-110, has 3/8" inlet and outlet, with 1/2 hp, 208/230/460 volt, 3 phase, 3450 rpm motor, serial number 371202.
  11. Pump, Gear, 1/2 HP, S/st, Micro, Mdl 142-000-110,

    Pump, Gear, 1/3 HP, S/st, 1 X 1, Viking,

    Stock Number: C615600

    Viking gear pump, 1" x 1", stainless steel, Model HL153, 1/3 HP, 110/220Volt, single phase belt drive, unitzed, 35 gallons per minute at 50 PSI.
  12. Pump, Gear, 1/3 HP, S/st, 1 X 1, Viking,

    Pump, Gear, 1/4 HP, Plastic, Vanton, Mdl CCPY18RH,

    Stock Number: S615650

    Vanton plastic gear pump model CC-PY18R-H. Unit has 1/4 HP 110 volt drive with 1/2" inlet/outlet. Serial number 85777.
  13. Pump, Gear, 1/4 HP, Plastic, Vanton, Mdl CCPY18RH,

    Pump, Gear, 1/4 HP, Plastic, Vanton, Mdl CCPY18BH,

    Stock Number: S615651

    Vanton plastic gear pump model CC-PY18B-H. Unit has 1/4 HP 110 volt drive with 1/2" inlet/outlet. Serial number 85776.
  14. Pump, Gear, 1/4 HP, Plastic, Vanton, Mdl CCPY18BH,

    Pump, Gear, 3 HP, C/st, Liquid Handling, Mdl K151

    Stock Number: S740844

    Pump, gear, L.A. LIQUID HANDLING SYSTEMS model k151, 1.5" Inlet & outlet , carbon steel,3 HP 1740 RPM motor is 230/460V, unitized on base. Pump has pressure relief bypass valve, threaded in/out, serial number141566.

14 Item(s)

per page

Set Ascending Direction

Please wait...