+1-415-467-3400

Pump

Items 1 to 100 of 407 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. Pump, Centrif., 1,000 HP, S/st, Egger, Type E0 11-400, (2)

    Stock Number: S737628

    (2) Egger centrifugal pump, Type EO 11-400 H6 LB6B, inlcudes 20" diameter Stainless steel impeller, 19-1/2" diameter Inlet/outlet, set up to be driven by 1,000 HP motor (offered less motor), designed for 12,000 GPM flow rate (756. 94 liters/sec.), up to 440 PSI operating pressure, up to 365 deg. F operating temp. New in 2010. Dry mounted, type H, horizontal vane pump with bearing housing & roller bearing with oil-bath lubrication. Designed as high performance pumps for homogenous liquids containing high concentration of solids and high gas contents (up to 25%). Unused and in like new condition.
  2. Pump, Centrif., 1,000 HP, S/st, Egger, Type E0 11-400, (2)

    Pump, Centrif., 825 HP, A/C, 52,100 GPM, Storm Water (2)

    Stock Number: C733607

    (2) Centrifugal pump, 825 HP drive, manufactured by Allis-Chalmers, rated for 52,100 GPM @ 51' head, at 386 RPM. Size 42 x 42, Model 112-312-538, impeller diameter 47.7/43. 6, type WSY BV, serial number 852-08191. Complete with 825 HP, 4160V, 3/60 cycle, 395 RPM direct connect motor, vertically mounted (one motor rewound and unused since). Also includes Eddy current coupling, type CAV, air cooled. Last used to control stormwater run-off in San Francisco. Very good condition. *** click on pdf file and thumbnails for more detail ***.
  3. Pump, Centrif., 825 HP, A/C, 52,100 GPM, Storm Water (2)

    Pump, Centrif., 400 HP, 316 S/st, 8 X 6, Worthington, (3)

    Stock Number: S734196

    (3) Centrifugal pumps, 8" x 6", 316 stainless steel, manufactured by Worthington Harrison, type 6 HNI 132A. Rated at 1900 GPM at 150 deg. F. and 215 PSI, 577 foot head. Complete with 400 HP, 3550 RPM, 4000 volt motor. Last used on demineralized water. Condition excellent.
  4. Pump, Centrif., 400 HP, 316 S/st, 8 X 6, Worthington, (3)

    Pump, Vacuum, 400 HP, Nash, Mdl 904P2, 2300/4160 Volt,

    Stock Number: S739089

    Nash vacuum pump, Model 904P2, driven by 400 HP, 2300/4160 volt, 60Hz, 1185 RPM motor. Originally used to pull vacuum on (2) 13' x 20' rotary vacuum drum filters for a phosphate minerals processing facility. The plant then installed a 13' x 80' vacuum belt filter system to replace the rotary filters. The Nash pump was utilized with this vacuum belt filter most recently. Equipment was dismantled and is now being stored at crane yard for easy loading.
  5. Pump, Vacuum, 400 HP, Nash, Mdl 904P2, 2300/4160 Volt,

    Pump, Moyno, 240 HP, 10", 316 S/st, Progressive Cavity, Mdl N-130, Seepex

    Stock Number: A738498

    Progressive cavity pump, 10" in/out. Manufactured by Seepex, Model N-240. Driven by 240 HP, 1750 RPM, 3/60 Hz motor through gear reducer. Rated for up to 1,000 GPM @ 300 PSI. Shaft and seal casings constructed of 316 TI stainless steel, shaft seals constructed of hastelloy. Pump was purchased new, never installed or used, and is in excellent condition.
  6. Pump, Moyno, 240 HP, 10", 316 S/st, Progressive Cavity, Mdl N-130, Seepex

    Pump, Sump, 150 HP, 14 X 12, A/C,

    Stock Number: Z623100

    Allis-Chalmers vertical pump, 14" x 12", 150 HP motor, serial number JX17221.
  7. Pump, Sump, 150 HP, 14 X 12, A/C,

    Pump, Centrif., 125 HP, C/st, Goulds, Mdl 3196

    Stock Number: C737575

    Goulds pump, Model# 3196, size 6x8-13, serial# 296B6L4-2, 1800 RPM, carbon steel construction. Driven by 125 HP, 460V, 1785 RPM, 3/60hz motor.
  8. Pump, Centrif., 125 HP, C/st, Goulds, Mdl 3196

    Pump, Centrif., 125 HP, C/st, Cornell, Mdl 4H0-CC

    Stock Number: S737634

    Centrifugal pump, manufactured by Cornell, Model# 4H0-CC, 7" inlet, 4" outlet, carbon steel construction, driven by 125 HP, 1785 RPM, 460V, 3/60Hz motor. Unused and in like new condition. Serial number 164827.
  9. Pump, Centrif., 125 HP, C/st, Cornell, Mdl 4H0-CC

    Pump, Moyno, 125 HP, 8", 316 S/st, Progressive Cavity, Mdl N-130, Seepex

    Stock Number: A738497

    Progressive cavity pump, 10" diameter in, 8" diameter out. Manufactured by Seepex, Model N-130. Driven by 125 HP, 1750 RPM, 3/60 Hz motor through gear reducer. Rated for 400 GPM @ 300 PSI. Shaft and seal casings constructed of 316 TI stainless steel, shaft seals constructed of hastelloy. Pump was purchased new, never installed or used, and is in excellent condition.
  10. Pump, Moyno, 125 HP, 8", 316 S/st, Progressive Cavity, Mdl N-130, Seepex

    Pump, Centrif., 125 HP, R/L, 14" X 12", Galigher, SRL,

    Stock Number: S611100

    Rubber lined centrifugal pump, SRL pump, manufactured by galigher, vacseal, model 12vra200. Horizontal split casing design. 14" x 12". Pump is driven by 125 HP motor and V-belt. Pump serial number P769050. Pump is rated approximately 3500 GPM @ 75' TDH. Appears to be in very good condition.
  11. Pump, Centrif., 125 HP, R/L, 14" X 12", Galigher, SRL,

    Pump, Centrif., 100 HP, 6", Wilfley, #55,

    Stock Number: S610245

    Centrifugal pump, Wilfley, 6" horizontal, model 55-111/6C & K/K740, rubber covered. Pump is complete with 100 HP motor, V-belt, pulleys, stand and base.
  12. Pump, Centrif., 100 HP, 6", Wilfley, #55,

    Pump, Multistage, Afton, 100 HP, 400 GPM, S/st, (5)

    Stock Number: C740829

    (5) Stainless steel vertical multistage high pressure pump, manufactured by Afton, model # 4x6x9 MPV. Unit is a three (3) stage design, rated for 400 gallons/min and 296 TDH with 1800 rpm. Suction and discharge pressure of 285 PSI @ 100 deg F., hydro suction and discharge pressure rating of 428 PSI. Driven by 100 HP, 460V, 3/60hz motor. Previously used with reverse osmosis system. Serial # 34575. New in 1995. Good condition.
  13. Pump, Multistage, Afton, 100 HP, 400 GPM, S/st, (5)

    Pump, Multistage, Afton, 100 HP, 325 GPM, S/st, (2)

    Stock Number: C740830

    (2) Stainless steel vertical multistage high pressure pump, manufactured by Afton, model # 4x6x9 MPV. Unit is a three (3) stage design, rated for 325 gallons/min and 203 TDH with 1800 rpm. Suction and discharge pressure of 285 PSI @ 100 deg F., hydro suction and discharge pressure rating of 428 PSI. Driven by 100 HP, 460V, 3/60hz motor. Previously used with reverse osmosis system. Serial # 34576. New in 1995. Good condition.
  14. Pump, Multistage, Afton, 100 HP, 325 GPM, S/st, (2)

    Pump, Centrif., 75 HP, C/I, 6 X 6, Peerless, Mdl F1260,

    Stock Number: C610351

    Peerless centrifugal pump, 6" x 6" x 12", Model F1260, cast iron, bronze fitted, horizontal, end suction, packed type stuffing box, 1800 6 RPM at 115' TDH, with steel base frame and 75 HP, 1750 RPM, 230/440Volt motor.
  15. Pump, Centrif., 75 HP, C/I, 6 X 6, Peerless, Mdl F1260,

    Pump, Centrif., 75 HP, C/I, 6 X 8, Peerless, Mdl F3-1660 AP,

    Stock Number: C610353

    Peerless centrifugal pump, 6" x 8", Model F3-1660 AP, cast iron, bronze fitted, horizontal, end suction, imepeller diameter 13. 3", mounted on base and direct connect to 75 HP, Louis Allis motor, 1775 RPM, 2135 frame, 230/440Volt.
  16. Pump, Centrif., 75 HP, C/I, 6 X 8, Peerless, Mdl F3-1660 AP,

    Pump, Vacuum, 75 HP, H8, Nash,

    Stock Number: Z625410

    Nash vacuum pump, Model H8, carbon steel, with 75 HP, 220/440V, V-belt drive, (not unitized), last run as vacuum pump, for twin 8 x 8 Feinc filters in pectin (citrus) plant, drive motor rated at 990 RPM, pump optinum from 630 RPM, complete with appropriate V-belt sheaves, less belts.
  17. Pump, Vacuum, 75 HP, H8, Nash,

    Pump, Multistage, Goulds, 60 HP, Mdl 92sv, Booster,

    Stock Number: C738737

    Goulds multi-stage vertical booster pump, type 92SV, Model number 92SVDD22T6PA, 4" diameter inlet / outlet. Pump is driven by 60 HP, 3560 RPM, 230/460V, 3/60hz motor, stainless steel liquid end components, manufactured by Bell & Gossett / Goulds, G&L series SSV. Unused and in excellent condition.
  18. Pump, Multistage, Goulds, 60 HP, Mdl 92sv, Booster,

    Pump, Centrif., 50 HP, Warman, Mdl 6/4AH, 6"/4", Srl,

    Stock Number: S737631

    Warman pump, 50 HP, Model number 6/4AH, 6" in/4" out. Complete with 50 HP, 1780 RPM, 230/460V, 3/60Hz motor thru V-belt drive. Manufactured by Flowserve, serial# MDS37474M, part# DAM005XLM. Rated for 1200 GPM @ 60' TDH. Unitized on base. Carbon steel construction with internal coating. Like new condition.
  19. Pump, Centrif., 50 HP, Warman, Mdl 6/4AH, 6"/4", Srl,

    Pump, Centrif., 50 HP, 6 X 8, TRW Mission, Mdl 05960-50,

    Stock Number: C610420

    TRW Mission centrifugal pump, 6" x 8", Model 05960-50, with 50 HP motor. Voltage: 230/460 Serial# N23566.
  20. Pump, Centrif., 50 HP, 6 X 8, TRW Mission, Mdl 05960-50,

    Pump, Hydraulic, 50 HP, 2000 PSI, Parker,

    Stock Number: C616200

    Volume vane pump, 142 CC/REV capacity, R rotation, 2000 PSI max pressure with 50 HP Lincoln motor, 1770 RPM, 326T frame.
  21. Pump, Hydraulic, 50 HP, 2000 PSI, Parker,

    Pump, Hydraulic, 50 HP, 2000 PSI, Parker, Mdl PVV14220R14,

    Stock Number: C616210

    Parker hydraulic pump, 50 HP, Model PVV14220R14, variable volume vane pump, 142 CC/REV capacity, R rotation, 2000 PSI max pressure with 50 HP Lincoln motor, 1770 RPM, 326 T frame.
  22. Pump, Hydraulic, 50 HP, 2000 PSI, Parker, Mdl PVV14220R14,

    Pump, Hydraulic, 50 HP, 2000 PSI, Parker, Mdl PVV14220R14, (4)

    Stock Number: C616220

    (4) Parker hydraulic pump, Model PVV14220R14, variable volume vane pump, 142 CC/REV capacity, R rotation, 2000 PSI maximum pressure, with 50 HP Lincoln motor, 1770 RPM, 326 T-frame.
  23. Pump, Hydraulic, 50 HP, 2000 PSI, Parker, Mdl PVV14220R14, (4)

    Pump, Sump, 50 HP, 6", Johnston, S/st,

    Stock Number: S623350

    Johnston sump pump, type 8BS, with 5-9/16" impeller. Unit stainless steel contact parts with 46" deep draw, 20" diameter flange with 5-1/2" flange discharge. Unit powered by approx. 50 HP main motor drive, 220/440 volt. Serial number JR-4407.
  24. Pump, Sump, 50 HP, 6", Johnston, S/st,

    Pump, Moyno, 40 HP, 8", C/st, Progressive Cavity, Roper,

    Stock Number: S737638

    Progressive cavity pump, 8" diameter in/out, manufactured by Roper, figure 72444 GHL, spec# PC0712. Driven by 40 HP, 1780 RPM, 230/460V, 3/60Hz motor. Includes chrome plated rotor, rubber stator & hardened replaceable universal joint parts. Includes large clean-out ports where large objects can be removed without dismantling the pump. Designed for gentle pumping, with easy pumping control and pressure stability, with ability to handle low or high viscosity products with or without solids. Unused and in like new condition.
  25. Pump, Moyno, 40 HP, 8", C/st, Progressive Cavity, Roper,

    Pump, Centrif., 40 HP, S/st, Durion, 6" X 4",

    Stock Number: Z611604

    Durion centrifugal pump, 6" x 4", stainless steel, mounted on base with 40 HP, 460V, 1750 RPM, TEFC motor, Model 6X4-13-11. 4.
  26. Pump, Centrif., 40 HP, S/st, Durion, 6" X 4",

    Pump, Centrif., 40 HP, Cornell, C/st,

    Stock Number: S739391

    Centrifugal pump, manufactured by Cornell, model number 3HA-F16K, Serial number 72097-14. Unit has a 3" inlet and 6" outlet, Driven by 40 HP, 230/460 Volt, 1755 RPM motor.
  27. Pump, Centrif., 40 HP, Cornell, C/st,

    Pump, Centrif., 30 kW, C/st, Ritz, Mdl 65200.1NF, 3", (2)

    Stock Number: S739824

    (2) Ritz Centrifugal pump, model 65-200.1NF, 3" x 2-1/2", rated for 396 GPM, cast iron steel contacts, driven by 30 kw, 3555 rpm, 220 volt motor. Serial numbers 3365532 and 3362629.
  28. Pump, Centrif., 30 kW, C/st, Ritz, Mdl 65200.1NF, 3", (2)

    Pump, Centrif., 30 kW, C/st, Ritz, Mdl 65200.2NF, 3"

    $3,750.00

    Stock Number: S739825

    Ritz Centrifugal pump, model 65-200.2NF, 3" x 2-1/2", rated for 396 GPM, cast iron steel contacts, driven by 30 kw, 2955 rpm, 415 volt motor. Serial number 336892.
  29. Pump, Centrif., 30 kW, C/st, Ritz, Mdl 65200.2NF, 3"

    Pump, Centrif., 30 kW C/st, Ritz, Mdl 65-203.N, 3"

    Stock Number: S739826

    Ritz Centrifugal pump, model 65-200.2NF, 3" x 2-1/2", rated for 396 GPM, cast iron steel contacts, driven by 30 kw, 3545 rpm, 220/380 volt motor. Serial number 3350274.
  30. Pump, Centrif., 30 kW C/st, Ritz, Mdl 65-203.N, 3"

    Pump, Centrif., 32 HP, S/st, 4-1/2" In, 24.5 kW

    Stock Number: S737283

    Centrifugal pump, stainless steel, mfg in Italy. Unit is model CS65-210. Unit has 4-1/2" inlet and 3-5/8" outlet, 24. 5 kW 277/480V, 3500 RPM motor. Serial number 45493.
  31. Pump, Centrif., 32 HP, S/st, 4-1/2" In, 24.5 kW

    Pump, Centrif., 30 HP, S/st, Sterling, Mdl EBO302FHA, 4" In, 3" Out,

    Stock Number: S734930

    Sterling 30 HP pump, model EBO302FHA0,. Has 4" inlet and 3" outlet, 208-230/460V, 3525 RPM, stainless steel. Serial number 0305Q6845.
  32. Pump, Centrif., 30 HP, S/st, Sterling, Mdl EBO302FHA, 4" In, 3" Out,

    Pump, Centrif., 30 HP, R/L, 5" X 6", Wilfley,

    Stock Number: S611152

    Centrifugal pump, Wilfley, 5" x 6", rubber lined, driven by 30 HP motor.
  33. Pump, Centrif., 30 HP, R/L, 5" X 6", Wilfley,

    Pump, Vacuum, 25 HP, Sullair, SL522-B-12, C/st,

    Stock Number: C625576

    Vacuum pump, Sullair, Model SL-522-B-12, liquid ring type, 2 stage, previously driven by 25 HP 3/60/460V, 1770 RPM motor. 2" in/out. Pump only. No base. Serial number 072-81076.
  34. Pump, Vacuum, 25 HP, Sullair, SL522-B-12, C/st,

    Pump, Centrif., 25 HP, 316 S/st, Gould, Mdl SSH, 2-1/2" Out,

    Stock Number: S735583

    Goulds 316 stainless steel pump. Unit is model SSH, end suction pump, G&L series SSH, SM group. Unit is size 3-1/8" inlet x 2-1/2" outlet, flanged. Unit is 25 HP, 208-230/460V unit capable of 150 GPM, carbon steel frame, impeller diameter is 7.125, Serial number 22SHK2.
  35. Pump, Centrif., 25 HP, 316 S/st, Gould, Mdl SSH, 2-1/2" Out,

    Pump, Centrif., 25 HP, S/st, 2" x 1-3/4",

    Stock Number: S738937

    Stainless steel centrifugal pump, manufactured by FC, model # LKHU40M20554VS28EINN. Driven by 25 HP, 3/60Hz, 3520 rpm, 230/460v Sterling electic motor. Last used in a pharmaceutical operation. 2" inlet x 1-3/4" outlet. Very good condition.
  36. Pump, Centrif., 25 HP, S/st, 2" x 1-3/4",

    Pump, Centrif., 18.5 kW, C/st, Ritz, Mdl 50-250 3"

    Stock Number: S739829

    Ritz Centrifugal pump, model 50-250, 3" x 2-1/2", rated for 220 GPM, cast iron steel contacts, driven by 18.5 kw, 2910 rpm, 415 volt motor. Serial number 3349235.
  37. Pump, Centrif., 18.5 kW, C/st, Ritz, Mdl 50-250 3"

    Pump, Moyno, 25 HP, 4", S/st, Robbin, Mdl 2FFC10HSJE

    Stock Number: S740722

    Robbins Myers stainless steel Moyno pump, unit has 4" inlet outlet, is model 2FFC10HSJE, is 48" long, mounted on stainless steel square tubing & legs. Unit is driven by 25 HP, 230/460 volt, 1760 rpm, 3 phase drive.
  38. Pump, Moyno, 25 HP, 4", S/st, Robbin, Mdl 2FFC10HSJE

    Pump, Centrif., 18 kW, C/st, Ritz, Mdl 50-200.1NF, (2)

    Stock Number: S739828

    (2) Ritz Centrifugal pump, model 50-200.1NF, 3" x 2-1/2", rated for 220 GPM, cast iron steel contacts, driven by 18 kw, 3520 rpm, 440 volt motor. Serial numbers 33650274 and 3368751.
  39. Pump, Centrif., 18 kW, C/st, Ritz, Mdl 50-200.1NF, (2)

    Pump, Vacuum, SIHI, 20 HP, Mdl LPHR 55316-ABAAA0B0

    Stock Number: S737006

    SIHI vacuum pump, model LPHR 55316-ABAAA0B0. Complete with 20 HP 3/60/230/440 volt, 1760 RPM motor. Can be used on 50 or 60Hz. Serial number C06536320-01. Pump is mounted on stand with vacuum receiver and small heat exchanger.
  40. Pump, Vacuum, SIHI, 20 HP, Mdl LPHR 55316-ABAAA0B0

    Pump, Centrif., 20 HP, C/st, 2 x 3, Dean Bros, 300 GPM

    Stock Number: S734549

    Dean Bros. centrifugal pump, carbon steel. Unit is 2 x 3 x 11. 5 impeller, skid mounted with 20 HP, 220/440V XP motor dirve, 1750 RPM. Pump is rated for 300 GPM @ 120' head pressure. Unit looks to be in good condition.
  41. Pump, Centrif., 20 HP, C/st, 2 x 3, Dean Bros, 300 GPM

    Pump, Centrif., 20 HP, S/st, 6 X 8, Krogh,

    Stock Number: S611608

    Pump, centrifugal, Krogh, 6 x 8, with stainless steel impeller and housing. Pump direct coupled to 20 HP, 1160 RPM, 220/440 volt TEFC motor. Pump is in good condition. Serial number 72644.
  42. Pump, Centrif., 20 HP, S/st, 6 X 8, Krogh,

    Pump, Centrif., 20 HP, S/st, Sanitary, APV/Crepaco,

    Stock Number: S611607

    Apv/Crepaco stainless steel sanitary pump. Pump features 3" inlet, 1" outlet and 8" rotor. Unit is driven by 20 HP 220/440V, 3500 RPM drive motor direct coupled.
  43. Pump, Centrif., 20 HP, S/st, Sanitary, APV/Crepaco,

    Pump, Centrif., 20 HP, S/st, 2" X 3"-13", Power D,

    Stock Number: S611609

    Centrifugal pump, 316 stainless steel, Power D model 8196, 3" x 2" with 13" diameter impeller, driven by 20 HP motor, 1750 RPM. Pump was last used @ 270 GPM. Serial numbers 20286-002 and 33384-007.
  44. Pump, Centrif., 20 HP, S/st, 2" X 3"-13", Power D,

    Pump, Induction, 20 HP, Gould, Mdl 2x2x1-2/3, S/st

    Stock Number: S734928

    Goulds induction pump, 20 HP, 230/460V, 3525 RPM, model 2" x 2" x 1-2/3", stainless steel, unitized on stand, carbon steel frame.
  45. Pump, Induction, 20 HP, Gould, Mdl 2x2x1-2/3, S/st

    Pump, Vacuum, 20 HP, Elmo Rietschle, G 200, Gas-ring,

    Stock Number: S735027

    Gas-ring vacuum pump/compressor, side channel type, manufactured by Elmo Rietschle (Gardner Denver), series G_200, Model number G200 2BH1900-7AH16, single impeller type. Driven by 14.5 kW 3500 RPM, 3/60Hz motor. Serial# BN1009697001/1206. Appears to be unused and in excellent condition.
  46. Pump, Vacuum, 20 HP, Elmo Rietschle, G 200, Gas-ring,

    Pump, Vacuum, Sihi, 20 HP, Est 250 CFM @ 26" Hg,

    Stock Number: S625615

    Vacuum pump, SIHI, model LPHY 5612-3N115.02. 0, serial number 2340 774 & 775. Pump is rated approx 250 CFM @ 26" hg. Mounted on steel base with 20 HP 3/60/230-460/1765 RPM motor direct connected.
  47. Pump, Vacuum, Sihi, 20 HP, Est 250 CFM @ 26" Hg,

    Pump, Centrif., 20 HP, Waukesha, S/st, 3" In,

    Stock Number: S737282

    Waukesha centrifugal pump, stainless steel. Unit is model C218 "C" series. Unit has 3" inlet and 2" outlet, 20 HP, 230/460V, 3,525 RPM motor. Pump has sanitary quick clamp. Serial number 450039-07.
  48. Pump, Centrif., 20 HP, Waukesha, S/st, 3" In,

    Pump, Centrif., 20 HP, Cornell, C/st

    Stock Number: S739407

    Centrifugal pump, manufactured by Cornell, model number 4RB-F165, serial number 87570-9.25. Unit has a 4" inlet and a 6" outlet. Driven by 20 HP, 230/460V, 1765 rpm motor.
  49. Pump, Centrif., 20 HP, Cornell, C/st

    Pump, Centrif., 20 HP, S/st, Fristam, Mdl FPX1742, 2-1/2"

    Stock Number: S739817

    Fristam stainless steel centrifugal pump, model FPX-1742, with 2-1/2" inlet and 2" outlet. Unit has sanitary wash down motor, 20 hp, 230/460 volt, 3525 rpm, max of 400 gpm.
  50. Pump, Centrif., 20 HP, S/st, Fristam, Mdl FPX1742, 2-1/2"

    Pump, Centrif., 20 HP, S/st, Valley Foundry, 3" In/Out

    Stock Number: C739901

    Valley Foundry Model CH153 centrifugal pump, driven by 20 HP, 230/460 volt, 1750 RPM, 3/60Hz motor. Pump includes stainless steel contacts with 3" diameter inlet and 3" diameter outlet. Serial# 6-77. Mounted on portable cart. Previously used at winery.
  51. Pump, Centrif., 20 HP, S/st, Valley Foundry, 3" In/Out

    Pump, Positive, Waukesha, Mdl 220, S/st, 4", 20 HP, Jkt,

    Stock Number: S740195

    Waukesha Size 220 stainless steel, positive displacement pump, jacketed pump head, Includes 4" inlet & outlet. Pump is complete with 20 HP, 460V, 1765 RPM, 3/60Hz motor. Rated for maximum capacity of 310 GPM. Serial number 294365-01. Previously used in condiments, sauces and jellies manufacturing facility.
  52. Pump, Positive, Waukesha, Mdl 220, S/st, 4", 20 HP, Jkt,

    Pump, Centrif., 20 HP, C/st, 5" In/Out, Water Pump,

    Stock Number: C740659

    Cornell centrifugal pump, driven by approximately 20 HP motor, 5" diameter inlet/oulet. Previously used to move water at vegetable packing facility. In working condition when removed from service.
  53. Pump, Centrif., 20 HP, C/st, 5" In/Out, Water Pump,

    Pump, Moyno, 15 HP, S/st, Seepex, Size 70, C737779

    Stock Number: C737779

    Pump, Moyno-style, manufactured by Seepex, stainless steel contacts, 8" in/6" out, size 70, range bn, pressure stage 12, commission# 88131, rated for 115 GPM, 125 RPM, 59.47 PSI. Driven by 15 HP 230/460, 1760 RPM, 3/60 Siemens drive.
  54. Pump, Moyno, 15 HP, S/st, Seepex, Size 70, C737779

    Pump, Moyno, 15 HP, S/st, Mdl 550, 2" Inlet,

    Stock Number: S738819

    Stainless steel Moyno pump, Model number 550 FOR BG, 2" inlet; 2-1/2" x 18" outlet, stainless steel contact parts. Driven by 15 HP 208-230/460 volt 1740 RPM drive, with manual speed control. Unit is mounted on carbon steel frame. Serial number AS65389.
  55. Pump, Moyno, 15 HP, S/st, Mdl 550, 2" Inlet,

    Pump, Centrif., 15 HP, C/st, 1-1/2" X 2", Bell & Gossett

    Stock Number: C731375

    Bell & Gosset centrifugal pump, Model 1531-11/2BB-73/4B 1 1/2" x 2", serial number 82055, 15 HP motor, 3600 RPM, 3 ph, 60 hz 100 GPM@270 ft, carbon steel.
  56. Pump, Centrif., 15 HP, C/st, 1-1/2" X 2", Bell & Gossett

    Pump, Centrif., 15 HP, S/st, 2-1/2" X 1-1/2",

    Stock Number: S734373

    Centrifugal pump, stainless steel lined, 2-1/2" inlet, 1-1/2" outlet, driven by 15 HP, 230/460V, 3480 RPM, 3/60Hz cycle motor. Previously used at guava processing facility. Appears to be in good condition.
  57. Pump, Centrif., 15 HP, S/st, 2-1/2" X 1-1/2",

    Pump, Centrif., 15 HP, C/st, 3 X 3, Byron,

    Stock Number: Z610600

    Byron, 3" x 3", centrifugal pump, carbon steel, 15 HP motor.
  58. Pump, Centrif., 15 HP, C/st, 3 X 3, Byron,

    Pump, Centrif., 15 HP, C/st, 3 X 3, Viking,

    Stock Number: Z610605

    Viking centrifugal pump, 3 x 3, carbon steel, Model 117124, heavy duty rotary pump, 15 HP, 3/60/220-440, 1760 RPM, TEFC motor, V-belt drive, base mounted.
  59. Pump, Centrif., 15 HP, C/st, 3 X 3, Viking,

    Pump, Centrif., 15 HP, C/st, 3" X 4", 325 GPM,

    Stock Number: C734043

    Centrifugal pump, 3" x 4", 10.25" impeller, rated for 325 GPM @ 90 TDH, carbon steel contacts, driven by 15 HP motor 1760 RPM, 230/460V, 3/60 Hz. Manufactured by Paco, cat. # 10-3012-7400X1A01-2, serial# LT F19693B. Fair to good condition.
  60. Pump, Centrif., 15 HP, C/st, 3" X 4", 325 GPM,

    Pump, Centrif., 15 HP, C/st, 4 X 3, Paco,

    Stock Number: S610590

    Centrifugal pump, Paco, carbon steel contacts, 15 HP, 3/60/230/460V 3505 RPM continuous drive. Pump is rated 400 GPM @ 100 TDH. Impeller diameter is 5.60. Has 4" in x 3" outlet.
  61. Pump, Centrif., 15 HP, C/st, 4 X 3, Paco,

    Pump, Centrif., 15 HP, C/st, 5" In/out, (4)

    Stock Number: S734497

    (4) Centrifugal pump, carbon steel construction, driven by 15 HP, 230/460V, 3/60Hz motor, top mounted 5" inlet/outlet. Unitized on skid. Appears to be in good condition.
  62. Pump, Centrif., 15 HP, C/st, 5" In/out, (4)

    Pump, Centrif., 15 HP, S/st, 3 X 4, Ampco, (2)

    Stock Number: S733919

    (2) Centrifugal pump, manufactured by Ampco, driven by 15 HP drive, stainless steel contacts, 3" x 4".
  63. Pump, Centrif., 15 HP, S/st, 3 X 4, Ampco, (2)

    Pump, Centrif., 15 HP, S/st, 3" X 2" X 6", Dean Bros,

    Stock Number: S611622

    Dean Bros. stainless steel pump, 3" x 2" x 6", stainless steel contact parts. Pump has 15 HP, 220/440 volt drive, 3550 RPM direct coupled. Pump is in good condition and Serial number GS1350, last operated in soap plant.
  64. Pump, Centrif., 15 HP, S/st, 3" X 2" X 6", Dean Bros,

    Pump, Centrif., 15 HP, S/st, 2" X 3"-13", Power D,

    Stock Number: S611621

    Stainless steel centrifugal pump, Power D model 8196, 3" x 2" with 13" diameter impeller, driven by 15 HP motor. Pump was last used @ 270 GPM.
  65. Pump, Centrif., 15 HP, S/st, 2" X 3"-13", Power D,

    Pump, Centrif., 15 HP, S/st, 3" x 2", Power D,

    Stock Number: S730031

    Pump, centrifugal, stainless steel, manufactured by Power D, 15 HP 3490 RPM drive drive, 230/460V. Unit meausres 3" x 2", skid mounted.
  66. Pump, Centrif., 15 HP, S/st, 3" x 2", Power D,

    Pump, Centrif., 15 HP, S/st, 4" X 3", Wilfley,

    Stock Number: S611618

    Centrifugal pump, Wilfley, model TBEP, stainless steel contacts, with 4" inlet and 3" outlet. Driven by 15 HP, 1755 RPM 230/460V direct coupled motor. All unitized on base. Serial number 7501A.
  67. Pump, Centrif., 15 HP, S/st, 4" X 3", Wilfley,

    Pump, Centrif., 15 HP, S/st, 2" x 1", Worthington,

    Stock Number: S730032

    Pump, centrifugal, stainless steel, manufactured by Worthington. Unit measures 2" x 1", 15 HP 230/460V 3490 RPM drive. Skid mounted, good condition.
  68. Pump, Centrif., 15 HP, S/st, 2" x 1", Worthington,

    Pump, Centrif., 15 HP, S/st, 3" X 2" X 12", Worthington,

    Stock Number: S611623

    Worthington stainless steel centrifugal pump, type 2CG3A, Group 10562. Pump is 3" x 2" x 12", complete with 15 HP 220/440 volt drive, 1750 RPM. Pump is direct coupled to motor, unitized on stand, last run at soap plant. Pump serial number 1378166.
  69. Pump, Centrif., 15 HP, S/st, 3" X 2" X 12", Worthington,

    Pump, Gear, 15 HP, 2", Mdl L125, Viking,

    Stock Number: S615102

    Viking gear pump, 2" x 2", model L-125, serial number 1948543. Unit is carbon steel contact parts, driven by 15 HP, 880 RPM, V-belt drive motor, 220/440 volt. Pump is complete with 2" pressure relief by-pass valve.
  70. Pump, Gear, 15 HP, 2", Mdl L125, Viking,

    Pump, Positive, 15 HP, S/st, Triclover, Size 200,

    Stock Number: S621450

    Tri-clover positive displacement pump, stainless steel contacts, size 200 with 4" inlet and outlet. Unit has stainless steel housing and is in very good condition. Unit includes 15 HP, 220/440 volt Reeves variable speed drive, model PRREDS300-6-TC1-4-ST-S, Serial number T3135J.
  71. Pump, Positive, 15 HP, S/st, Triclover, Size 200,

    Pump, Sump, 15 HP, Clow, 316 S/st, 40 GPM, (4)

    Stock Number: S623361

    (2) vertical sump pump, Clow, model B-163 with 316 stainless steel contact parts. Unit rated at 40 GPM @ 160' head, with 10 HP 220/440 volt drive. Unit manufactured new 1980, unused.
  72. Pump, Sump, 15 HP, Clow, 316 S/st, 40 GPM, (4)

    Pump, Centrif., 15 HP, S/st, 2-1/2" x 2",

    Stock Number: S738938

    Stainless steel centrifugal pump, manufactured by LKH, model # LKH-35. Driven by 15HP, 230/460v, 3450 rpm, 3/60Hz washdown motor. 2-1/2" inlet x 2" outlet. Last used in a pharmaceutical operation. Very good condition.
  73. Pump, Centrif., 15 HP, S/st, 2-1/2" x 2",

    Pump, Centrif., 15 HP, Bronze, Burks, Mdl 3550G9,

    Stock Number: S739827

    BURKS centrifugal pump model 3550G9 Bronze Fitted Cast Iron Construction. Close Coupled to a 15 Horsepower, 3490 RPM, 208/230/460 Volts,60 /3 Phase Motor. Ports are 2" Inches NPT Inlet, 1-1/2 Inches NPT Outlet. unused.
  74. Pump, Centrif., 15 HP, Bronze, Burks, Mdl 3550G9,

    Pump, Centrif., 15 HP, S/st, Valley Foundry, 2" In/3" Out

    Stock Number: C739899

    Valley Foundry Model CH153 centrifugal pump, driven by 15 HP, 440 volt, 3/60Hz motor. Pump includes stainless steel contacts with 2" diameter inlet and 3" diameter outlet. Serial# 368. Mounted on portable cart. Previously used at winery.
  75. Pump, Centrif., 15 HP, S/st, Valley Foundry, 2" In/3" Out

    Pump, Positive, Waukesha, Mdl 130, S/st, 3", 15 HP, Jkt

    Stock Number: S740187

    Waukesha Size 130 stainless steel, positive displacement pump, jacketed pump head. Includes 3" inlet & outlet. Pump is driven by 15 HP, 230/460V, 1765 RPM, 3-phase, 60Hz motor, thru gear reducer with 4.22:1 ratio, resulting in final rpm of 420 RPM. No nameplate data available. Previously used in condiments, sauces and jellies manufacturing facility.
  76. Pump, Positive, Waukesha, Mdl 130, S/st, 3", 15 HP, Jkt

    Pump, Centrif., 10 HP, C/st, 3" X 2.5", Goulds,

    Stock Number: C738355

    Pump, centrifugal, manufactured by Goulds, Model# 3DJH23EL, 8" diameter impeller, carbon steel construction, 3" diameter in, 2-1/2" diameter out. Driven by 10 HP, 460V, 12.5 amps , 1765 RPM motor. Previously used at rubber processing facility.
  77. Pump, Centrif., 10 HP, C/st, 3" X 2.5", Goulds,

    Pump, Moyno, 10 HP, 8", C/st, Progressive Cavity, Roper, (2)

    Stock Number: S737637

    (2) Progressive cavity pump, 8" diameter in/out, manufactured by Roper, figure 71444 GHL, spec# PC0711. Driven by 10 HP, 1770 RPM, 230/460V, 3/60Hz motor. Includes chrome plated rotor, rubber stator & hardened replaceable universal joint parts. Includes large clean-out ports where large objects can be removed without dismantling the pump. Designed for gentle pumping, with easy pumping control and pressure stability, with ability to handle low or high viscosity products with or without solids. Unused and in like new condition.
  78. Pump, Moyno, 10 HP, 8", C/st, Progressive Cavity, Roper, (2)

    Pump, Vacuum, 10 HP, Rietschle, Type VC 300, S737568

    Stock Number: S737568

    Vacuum pump, manufactured by Rietschle, type VC 300 (02) 102587-0200, rated for 0.50/10 mbar (abs.), 300/360 cu. mt./hr. Driven by 10 HP, 208-230/460V, 1725 RPM, 3/60Hz motor. Serial# 12351107. Previously used at electronic manufacturing facility. Good condition. New in 2002. Mounted on frame with other Rietschle pump. Receiver tank and controls also available.
  79. Pump, Vacuum, 10 HP, Rietschle, Type VC 300, S737568

    Pump, Vacuum, 10 HP, Rietschle, Type VCEH 250,

    Stock Number: S737567

    Vacuum pump, manufactured by Rietschle, type VCEH 250 (02) 102166-0200, rated for 10 mbar, 250 m3/hr @ 50hz, 300 m3/hr @ 60Hz. Driven by 10 HP, 208-230/460V, 1725 RPM, 3/60Hz motor. Serial# 1793607 & 1898075. Previously used at electronic manufacturing facility. New in 1998. Good condition. Mounted on frame with other Rietschle pumps, receiver tank and controls also available.
  80. Pump, Vacuum, 10 HP, Rietschle, Type VCEH 250,

    Pump, Centrif., 10 HP, Gould, Mdl 3x4x8, S/st, (2)

    Stock Number: S734929

    (2) Goulds 10 HP pump, model 3"x4"x8", stainless steel. Units are 230/460V, 1725 RPM, carbon steel frame.
  81. Pump, Centrif., 10 HP, Gould, Mdl 3x4x8, S/st, (2)

    Pump, Centrif., 10 HP, C/st, 1.5 X 1.5, Byron,

    Stock Number: Z610710

    Pump, centrifugal, 10 HP, Byron, 1-1/2" x 1-1/2", carbon steel, with 10 HP motor.
  82. Pump, Centrif., 10 HP, C/st, 1.5 X 1.5, Byron,

    Pump, Centrif., 10 HP, S/st, 1.5 x 2.5 x 6, Sani

    Stock Number: C734247

    Stainless steel sanitary centrifugal pump with 10 HP, 230/460V, 3450 RPM direct drive. Unit measures 1.5" outlet, 2. 5" inlet and 6" rotor, Model number 4SHX1, serial number 4SH1LSA5. pump has 316 stainless contact parts, complete with quick disconnects, good condtiion. Last run on juice process.
  83. Pump, Centrif., 10 HP, S/st, 1.5 x 2.5 x 6, Sani

    Pump, Centrif., 10 HP, C/st, 1/2" X 1/2", Bell & Gossett

    Stock Number: C731377

    Pump, centrifugal, 1/2" x 1/2", Bell & Gosset, Model 1530-11/4BB-73/4B, serial number 82054, 10 HP motor, 3600 RPM, 3 ph, 60 Hz 40 GPM@270 ft, carbon steel.
  84. Pump, Centrif., 10 HP, C/st, 1/2" X 1/2", Bell & Gossett

    Pump, Centrif., 10 HP, C/st, 3" In/out,

    Stock Number: S735086

    Centrifugal pump, carbon steel, 3" in & out, 9" impeller, 10 HP, 230/460, 1760 RPM, 3/60Hz. Mounted on stainless steel base.
  85. Pump, Centrif., 10 HP, C/st, 3" In/out,

    Pump, Centrif., 10 HP, S/st, 6" x 4", Worthington, Mdl 4CNG-104,

    Stock Number: C610724

    Worthington centrifugal pump, 6" x 4" with 11-7/8" impeller, stainless steel contact parts. Unit complete with 10 HP, 1175 RPM, 208-220/440V, 3/60Hz direct coupled drive motor. Pump is Model 4CNG-104, serial number Y627774. Unit is skid mounted and in good condition.
  86. Pump, Centrif., 10 HP, S/st, 6" x 4", Worthington,  Mdl 4CNG-104,

    Pump, Centrif., 10 HP, S/st, 3 x 2 x 8, Tri Clover,

    Stock Number: S734246

    Stainless steel sanitary centrifugal pump with 7.5 HP, 230/460V, 3450 RPM direct drive. Unit measures 2" outlet, 3" inlet and 6" rotor. Manufactured by Tri-Clover model C218MD21T-S, Serial number R2538. Pump has Tri-Clover type quick connects and is in excellent condition. Last run on food process.
  87. Pump, Centrif., 10 HP, S/st, 3 x 2 x 8, Tri Clover,

    Pump, Centrif., 10 HP, S/st, Goulds,

    Stock Number: C611629

    Goulds centrifugal pump, 1-1/2" x 2" with 8" impeller, stainless with a 10 HP 3450 RPM motor. Pump new in 1992, serial number 2312987, index # 5SSFRMD4. Excellent condition.
  88. Pump, Centrif., 10 HP, S/st, Goulds,

    Pump, Centrif., 10 HP, S/st, 1.5" X 3" X 6", Goulds, Mdl 3196,

    Stock Number: C611628

    Goulds centrifugal pump, Model 3196, 316 stainless steel, size 1.50 x 3-6, with a impeller diameter of 6, and a 10 HP motor, 3600 RPM, 84 GPM and a 2" inlet and 3" outlet.
  89. Pump, Centrif., 10 HP, S/st, 1.5" X 3" X 6", Goulds, Mdl 3196,

    Pump, Centrif., 10 HP, S/st, 2" X 2", Labour,

    Stock Number: S611633

    Labour centrifugal pump, stainless steel contacts, 2" x 2" fittings, driven by 10 HP.
  90. Pump, Centrif., 10 HP, S/st, 2" X 2", Labour,

    Pump, Diaphragm, Pulsafeed, S/st, 1/2 HP

    Stock Number: Z613702

    Pulsafeed diaphragm pump, stainless steel, meter, Model 7120, 1/2 HP, 1725 RPM, 230/460V motor drive.
  91. Pump, Diaphragm, Pulsafeed, S/st, 1/2 HP

    Pump, Gear, 10 HP, 3"

    Stock Number: S615103

    Gear pump, 3" stainless steel inlet/outlet, flanged, driven by 10 HP us vari drive motor, 230/460V with 195 to 780 RPM.
  92. Pump, Gear, 10 HP, 3"

    Pump, Positive, APV-Crepaco, Size P6R, 3" In/Out, 10 HP Drive

    Stock Number: S733879

    APV Crepaco positive displacement pump size P6R. Unit has 3" inlet and discharge with Acme sanitary threads. Unit complete with 10 HP 220/440 volt 1170 RPM drive motor V-belt connected to pump for approx 300 RPM on pump. Complete unit mounted on carbon steel frame. Condition good.
  93. Pump, Positive, APV-Crepaco, Size P6R, 3" In/Out, 10 HP Drive

    Pump, Positive, 10 HP, S/st, Tri Clover, 2-1/2",

    Stock Number: C732084

    Pump, positive displacement, Tri-Clover, stainless steel, Model PRRED 125-2.5-UC4-SL-S, with 10 HP Reeves variable speed drive, drive needs repair, 2-1/2" in/out ACME thread on pump, complete with pressure relief bypass valve. Good condition.
  94. Pump, Positive, 10 HP, S/st, Tri Clover, 2-1/2",

    Pump, Sump, 10 HP, Clow, 316 S/st, 40 GPM, (12)

    Stock Number: S623701

    (12) Vertical sump pump, Clow, model V-162T with 316 stainless steel contact parts. Unit rated at 40 GPM @ 150' head, with 10 HP 220/440 volt drive. Unit manufactured new 1980, unused.
  95. Pump, Sump, 10 HP, Clow, 316 S/st, 40 GPM, (12)

    Pump, Sump, 10 HP, Clow, 316 S/st, 60 GPM, (8)

    Stock Number: S623702

    (8) Vertical sump pump, Clow, model N-162, series 3000 with 316 stainless steel contact parts. Unit rated at 60 GPM @ 150' head, with 10 HP 220/440 volt drive. Unit manufactured new 1980, unused. Stock number 255420, PO# 9779-139, work order number WPPSSNP.4, 60 GPM @ 1750 RPM.
  96. Pump, Sump, 10 HP, Clow, 316 S/st, 60 GPM, (8)

    Pump, Vacuum, Fuller, C/st, 10 HP, 600 CFM @ 1.5 PSI,

    Stock Number: S625845

    Vacuum pump, Fuller fluidizer, model S1F, serial number 1164, rated 600 CFM @ 1-1/2 PSI. Driven by 10 HP 3/60Hz, 230/460V motor. All unitized on common skid.
  97. Pump, Vacuum, Fuller, C/st, 10 HP, 600 CFM @ 1.5 PSI,

    Pump, Centrif., 10 HP, 2-3/4" In/2-1/4" Out,

    Stock Number: S738891

    Stainless Steel centrifugal pump, 2-3/4" inlet x 2-1/4" outlet. Unit driven by 10 HP, 3525 rpm, 208-230/460v, 3/60Hz Sterling electric motor. Last used in a pharmaceutical operation. Very good condition.
  98. Pump, Centrif., 10 HP, 2-3/4" In/2-1/4" Out,

    Pump, Centrif., 10 HP, S/st, Crepaco, (2)

    Stock Number: S739634

    (2) Crepaco stainless steel centrifugal pump with 2" inlet and 1-1/2" outlet and 7-1/2" rotor. Unit is driven by 10 hp, 230/460 volt, 3500 rpm direct drive, has male NPT fitting. Serial number SH-18-78.
  99. Pump, Centrif., 10 HP, S/st, Crepaco, (2)

    Pump, Centrif., 10 HP, S/st, Fristam, Mdl FPX3532, 2-1/2"

    Stock Number: S739818

    Fristam stainless steel centrifugal pump, model FPX-3532, with 2-1/2" inlet and 2" outlet. Impeller is 6-7/8" diameter. Unit has sanitary wash down motor, 10 hp, 230/460 volt, 3500 rpm, max of 300 gpm. Serial number FPX3532030140.
  100. Pump, Centrif., 10 HP, S/st, Fristam, Mdl FPX3532, 2-1/2"

    Pump, Positive, 10 HP, S/st, Viking, 3"

    Stock Number: S740145

    Stainless steel positive displacement pump manufactured by Viking. Unit is model LRL40257D, rated for 160 gpm, has 3" diameter inlet/outlet with flange connections, run by 10 Hp, 3 phase, 60 cycle, 230/460 volt, 1770 rpm motor.

Items 1 to 100 of 407 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction

Please wait...