Belt

S735485

PRESS, BELT, AMOS, 60", S/ST, MODEL AP 1500,

BELT PRESS, 60" WIDE X 15' LONG, MANUFACTURED BY AMOS, MODEL AP 1500, STANLESS STEEL FRAME WITH S/ST AND PLASTIC ROLLERS & TOP MOUNTED SPRAY BAR. RATED FOR APPROXIMATELY 14 TONS/HR ON APPLES. INCLUDES PNEUMATICALLY OPERATED SCRAPER KNIFE MECHANISM. ROLLER... Learn More

D735775

PRESS, BELT, ANDRITZ, 2 METER, S/ST, MODEL SMXS8-LP,

BELT PRESS, 2 METER BELT WIDTH, STAINLESS STEEL CONSTRUCTION, FABRIC FILTER MEDIA, MANUFACTURED BY ANDRITZ, MODEL NO. SMXS8-LP, RATED FOR 1,500 LBS/HR SOLIDS CAPACITY. BELT IS DRIVEN BY 7-1/2 HP MOTOR WITH VARIABLE FREQUENCY DRIVE. APPEARS TO BE IN VERY G... Learn More

C731604

PRESS, BELT, ANDRITZ, 3.5 METER WIDE,

ANDRITZ BELT PRESS, 3.5 METER BELT WIDTH, MODEL NO. CPR-3500-S7. EPOXY COVERED MILD STEEL FRAME, RUBBER COVERED ROLLERS, EXTRA HEAVY DUTY DESIGN, LAST USED FOR COAL WASH PLANT, TAILINGS AND SLUDGE DEWATERING. UNIT IS LESS DRIVE MOTORS, CONDITION VERY GOOD... Learn More

C735818

PRESS, BELT, EIMCO, 16" WIDE, S/ST, EXPRESSOR,

BELT PRESS, 16" WIDE X 10' LONG, EIMCO "EXPRESSOR" PRESS, STAINLESS STEEL FRAME, HYDRAULICALLY DRIVEN, SERIAL # 82250-01B. INCLUDES SCRAPER BLADE CONNECTION ON END, STAINLESS STEEL COLLECTION PANS UNDER ROLLERS. MOUNTED ON I- BEAM FRAMES WITH CASTERS, HEA... Learn More

S731416

PRESS, BELT, ENSINK, 54", S/ST & PLASTIC,

ENSINK BELT PRESS, WITH 54" WIDE STAINLESS STEEL ROLLERS, AND A 47" WIDE SANITARY POLYPROPYLENE MESH BELT. THE BELT IS 21-1/2' LONG WITH A 125" MAIN PRESSING SECTION, COMPLETE WITH S/ST KNIFE DISCHARGE, MIDDLE DRIP PAN SECTION WITH SIDE DISCHARGES, BOTTOM... Learn More

S593750

PRESS, BELT, KOMLINE-SANDERSON, 2 METER, S/ST, MDL GMD-2-0,

KOMLINE SANDERSON UNIMAT BELT FILTER PRESS, MODEL GMD-2/0. THIS UNIT IS A COMPLETE, 2 METER WIDE, STAINLESS STEEL PRODUCT CONTACT PART BELT PRESS. UNIT FEATURES PNEUMATICALLY CONTROLLED BELT TRACKING DEVICE. PRESS FEATURES 1 HP, DC FEEDER BELT DRIVE AND 2... Learn More

C593728

PRESS, BELT, PCP, 2.5 METER, S/ST, WINE,

PCP (PROIPAFISA) BELT PRESS, MODEL 2500/91, 2.5 METER BELT WIDTH. ALL WETTED PARTS ARE SANITARY STAINLESS STEEL. THE PRESS IS EQUIPPED WITH WAUKESHA INFEED PUMP WITH A 15 HP VARI-SPEED DRIVE, HYDRAULIC BELT TENTIONING AND ROLL ADJUSTMENT WITH HYDRAULIC DR... Learn More

C594000

PRESS, BELT, PNEUMAPRESS, 1 DIA., TITANIUM, MODEL 8T-2 (2)

(2) PNEUMAPRESS BELT FILTER PRESS, 1 METER DIAMETER PLATE, CONSISTS OF TITANIUM UPPER AND LOWER PLATE WHICH HYDRAULICALLY PRESSES ONTO A TRAVELING BELT. UPPER PLATE FORMS A CHAMBER WHERE SLURRY AND COMPRESSED AIR ARE INTRODUCED, LOWER PLATE COLLECTS LIQUI... Learn More

Can't find what you are looking for?

TOP REQUESTED CATEGORIES OF USED EQUIPMENT

Machinery & Equipment, Inc.
P.O. Box 7632, San Francisco, CA 94120

Phone: (415) 467-3400 Fax (415) 467-2639
San Francisco Toll Free (800) 227-4544
Los Angeles Toll Free (800) 870-9680

Used Food, Pharmaceutical, Chemical and Minerals Processing Equipment

You're currently on:

Category Navigation:

Belt

PRESS, BELT, AMOS, 60", S/ST, MODEL AP 1500,

PRESS, BELT, ANDRITZ, 2 METER, S/ST, MODEL SMXS8-LP,

PRESS, BELT, ANDRITZ, 3.5 METER WIDE,

PRESS, BELT, EIMCO, 16" WIDE, S/ST, EXPRESSOR,

PRESS, BELT, ENSINK, 54", S/ST & PLASTIC,

PRESS, BELT, KOMLINE-SANDERSON, 2 METER, S/ST, MDL GMD-2-0,

PRESS, BELT, PCP, 2.5 METER, S/ST, WINE,

PRESS, BELT, PNEUMAPRESS, 1 DIA., TITANIUM, MODEL 8T-2 (2)

Can't find what you are looking for?

Follow Us:

Used Food, Pharmaceutical, Chemical and Minerals Processing Equipment

You're currently on:

Category Navigation:

Belt

Can't find what you are looking for? Click Here View Cart

Follow Us:

Can't find what you are looking for?