+1-415-467-3400

Ribbon Mixer

51 Item(s)

per page

Set Ascending Direction
  1. Mixer, Ribbon, 400 CF, 304 S/st, 75 HP, New, Std

    Stock Number: H736822

    New double ribbon mixer, 400 CF working capacity, polished 304 stainless steel contacts, 146" long x 74" wide x 80" deep, stainless steel trough with mirror interior finish. Hinged cover with backrest, safety grates. 6.5" solid stainless steel shaft, 75mm wide x 18mm thick outer ribbon, 75mm wide x 10mm thick inner ribbon, 16 RPM ribbon speed. Trough is 10mm shell thickness. Mixer is driven by 75 HP, 220/440V, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 12" center bottom discharge, knife style pneumatic slide gate. Stainless steel frame & legs.
  2. Mixer, Ribbon, 400 CF, 304 S/st, 75 HP, New, Std

    Mixer, Ribbon, 400 CF, 304 S/st, 100 HP, HD, New

    Stock Number: H736823

    New double ribbon mixer, 400 CF working capacity, polished 304 stainless steel contacts, 146" long x 74" wide x 80" deep, stainless steel trough with mirror interior finish. Hinged cover with backrest, safety grates. 7" solid stainless steel shaft, 75mm wide x 20mm thick outer ribbon, 75mm wide x 12mm thick inner ribbon, 16 RPM ribbon speed. Trough is 10mm shell thickness. Mixer is driven by 100 HP, 220/440V, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 12" center bottom discharge, knife style pneumatic slide gate. Stainless steel frame & legs.
  3. Mixer, Ribbon, 400 CF, 304 S/st, 100 HP, HD, New

    Mixer, Ribbon, 350 CF, 304 S/st, 100 HP, New, HD

    Stock Number: H740560

    New double ribbon mixer, 350 CF working capacity, polished 304 stainless steel contacts, 140" long x 71" wide x 76" deep, stainless steel trough with mirror interior finish. Hinged cover with backrest, safety grates. 6" solid stainless steel shaft, 70mm wide x 12mm thick outer ribbon, 90mm wide x 10mm thick inner ribbon, 20mm thick spokes. Trough shell thickness is 8mm. Mixer is driven by 100 HP, 220/440v, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge, knife style pneumatic slide gate, 40" discharge height (Can be made up to 72" discharge height, as requested). Stainless steel frame & legs.
  4. Mixer, Ribbon, 350 CF, 304 S/st, 100 HP, New, HD

    Mixer, Ribbon, 300 CF, 304 S/st, 75 HP, New, Std

    Stock Number: H731072

    New double ribbon mixer, 300 CF working capacity, polished 304 stainless steel contacts, 132" long x 67" wide x 72" deep, stainless steel trough with mirror interior finish. Hinged cover with backrest, safety grates. 6.18" solid stainless steel shaft, 75mm wide x 12mm thick outer ribbon, 75mm wide x 10mm thick inner ribbon, 20mm thick spokes, 21 RPM ribbon speed. Trough is 8mm shell thickness. Mixer is driven by 75 HP, 220/440v, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge, knife style pneumatic slide gate, 48" discharge height. Stainless steel frame & legs.
  5. Mixer, Ribbon, 300 CF, 304 S/st, 75 HP, New, Std

    Mixer, Ribbon, 300 CF, 304 S/st, 100 HP, New, HD

    Stock Number: H739935

    New double ribbon mixer, 300 CF working capacity, polished 304 stainless steel contacts, 132" long x 67" wide x 72" deep, stainless steel trough with mirror interior finish. Hinged cover with backrest, safety grates. 6.5" solid stainless steel shaft, 75mm wide x 12mm thick outer ribbon, 75mm wide x 12mm thick inner ribbon, 20mm thick spokes, 21 RPM ribbon speed. Trough shell thickness is 8mm. Mixer is driven by 100 HP, 220/440v, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge, knife style pneumatic slide gate, 46" discharge height. Stainless steel frame & legs.
  6. Mixer, Ribbon, 300 CF, 304 S/st, 100 HP, New, HD

    Mixer, Ribbon, 300 CF, C/st, 60 HP, Load Cells, Augers,

    Stock Number: C740463

    Double Ribbon mixer, approximately 300 cubic feet total capacity (275 cubic feet working capacity), carbon steel construction, double ribbon mixer. Trough measures 14' long X 5' wide X 5'7" Deep. Inner ribbons measure 5" wide x 3/8" thick, Outer ribbon measures 1-1/2" wide X 3/8" thick. Driven by 60 HP, 1770 RPM, 230/460 V, 138/69 Amps, 3/60 Hz motor thru Falk 20.40:1 gear reducer, resulting in 84 output RPM. Gear reducer goes through chain & sprocket drive assembly. Bottom of trough has 24" wide opening running length and drops to dual unloading discharge augers with 12" X 20" discharge opening. Driven by 5 HP, 1735 RPM, 208-230/460 V, 3/60 Hz motor thru chain drive. Augers measure 12" diameter X 15' long. Complete with load cells, batch controller with scale, MCC cabinets for drives, large readout panel. All electrical is UL rated and new in 2015.
  7. Mixer, Ribbon, 300 CF, C/st, 60 HP, Load Cells, Augers,

    Mixer, Ribbon, 270 CF, S/st, 75 HP, Sanitary,

    Stock Number: D740757

    Stainless steel sanitary ribbon mixer, 270 cubic foot working capacity, manufactured by American Process Systems/Eirich, model number U270-5722. Trough measures approximately 12' long X 5' wide X 6' deep. Includes dual end discharges measuring 8" X 8" with pneumatically operated valves. Includes two (2) 26" top manways with removable magnetic bars/lids and one (1) top 18" X 30" opening with screen. Includes control panel. Previously used in sanitary food operation. Very good condition.
  8. Mixer, Ribbon, 270 CF, S/st, 75 HP, Sanitary,

    Mixer, Ribbon, 250 CF, 304 S/st, 75 HP, New, Hd,

    Stock Number: H735746

    New double ribbon mixer, 250 CF working capacity, polished 304 stainless steel construction, mirror interior finish interior, 126" long x 63" wide x 68" deep, 0.315" thick, stainless steel trough with hinged cover with backrest, safety grates. 6-1/2" solid stainless steel shaft, 2-1/3" x 1/2" outer ribbon, 3" x 2/5" inner ribbon, 22 RPM ribbon speed. Mixer is driven by 75 HP, 220/440v, gearhead motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge with chute, power operated discharge gate. Stainless steel frame & legs.
  9. Mixer, Ribbon, 250 CF, 304 S/st, 75 HP, New, Hd,

    Mixer, Ribbon, 200 CF, 304 S/st, 75 HP, New, HD, H733729

    Stock Number: H733729

    New double ribbon mixer, 200 CF working capacity, heavy duty, polished 304 stainless steel contacts, trough measures 116" long x 59" wide x 64" deep, with mirror interior finish, 8mm shell thickness. Includes 3-piece hinged cover with backrest and safety grates. 6.18" solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 75mm wide x 10mm thick inner ribbon, 22 RPM ribbon speed. Mixer is driven by 75 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge, knife style pneumatic slide gate, 48" discharge height. Stainless steel frame & legs.
  10. Mixer, Ribbon, 200 CF, 304 S/st, 75 HP, New, HD, H733729

    Mixer, Ribbon, 160 CF, Dbl, C/st, Less Drive, Davis,

    Stock Number: S730459

    Davis 160 cu. ft. carbon steel double ribbon mixer. Unit measures 4'4" wide x 9'5" long x 45" deep, has 9" center bottom outlet, with covers. Ribbons measure: outer 3/8" x 2", inner 3/8" x 2". Model HD40; serial number 870327, unit less drive.
  11. Mixer, Ribbon, 160 CF, Dbl, C/st, Less Drive, Davis,

    Mixer, Ribbon, 150 CF, 304 S/st, 50 HP, New, HD, H731071

    Stock Number: H731071

    New double ribbon mixer, 150 CF working capacity, heavy duty, polished 304 stainless steel contacts, trough measures 106" long x 53" wide x 58" deep, with mirror interior finish, 8mm shell thickness. Includes 3-piece hinged cover with backrest and safety grates. 5-3/4" solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 75mm wide x 10mm thick inner ribbon, 25 RPM ribbon speed. Mixer is driven by 50 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 10" center bottom discharge, knife style pneumatic slide gate, 49-1/2" discharge height. Stainless steel frame & legs.
  12. Mixer, Ribbon, 150 CF, 304 S/st, 50 HP, New, HD, H731071

    Mixer, Ribbon, 150 CF, S/st, Double Ribbon, Choppers

    Stock Number: A737245

    Ribbon mixer, approx. 150 cu.ft. capacity, stainless steel contacts, double ribbon, includes (2) choppers with drives, mild steel frame. Manufactured by Aaron Equipment. Complete with main drive and reported to be in good condition.
  13. Mixer, Ribbon, 150 CF, S/st, Double Ribbon, Choppers

    Mixer, Ribbon, 140 CF, C/st, 30 HP, Gruendler, 4' x 10'

    Stock Number: S730458

    Gruendler 140 cu. ft. carbon steel ribbon mixer. Unit measures 4' wide x 10' long x 54" deep. Complete set of hinged covers. Unit driven by 30 HP 220/440 volt gearhead main motor drive thru chain sprocket. Mixer has 10" diameter center bottom discharge. Previously installed on mezzanine, no legs. Unit is very heavy duty design with 5/8" x 3" outer ribbon.
  14. Mixer, Ribbon, 140 CF, C/st, 30 HP, Gruendler, 4' x 10'

    Mixer, Ribbon, 140 CF, C/st, Saracco,

    Stock Number: S542148

    Ribbon mixer, Saracco 140 cu. ft., 54" diameter ribbon swing x 9' long carbon steel trough with carbon steel double ribbon screw and paddles. Shaft diameter measures 3.937". Open top. No legs. No drive.
  15. Mixer, Ribbon, 140 CF, C/st, Saracco,

    Mixer, Ribbon, 140 CF, 316 S/st, 96" X 52" X 54"

    Stock Number: A740459

    Stainless steel double ribbon mixer, rated for 140 cubic feet capacity, measures 96" long X 52" wide X 54" deep. Constructed of 316 stainless steel. Good condition.
  16. Mixer, Ribbon, 140 CF, 316 S/st, 96" X 52" X 54"

    Mixer, Ribbon, 110 CF, S/st, 20 HP,

    Stock Number: D736892

    Mixer, ribbon, 110 cu.ft. working capacity, stainless steel contacts, double ribbon, mixing chamber measures 10' long x 43" wide x 50" deep, 12" diameter bottom center discharge with 3" flange, 8" off floor, double ribbons are 2-1/2"deep, 5/16" thick, 3-1/4" center shaft at bearings, 5-1/4" inside. 24" diameter drive sprocket, driven by 20 HP, 3-phase, 60-cycle, 220/440V motor connected to falk reducer, no cover, carbon steel frame, both frame and tub are painted on the outside. Overall dimensions: 12' long x 5' high.
  17. Mixer, Ribbon, 110 CF, S/st, 20 HP,

    Mixer, Ribbon, 100 CF, 304 S/st, 40 HP, New, HD, H731069

    Stock Number: H731069

    New double ribbon mixer, 100 CF working capacity, heavy duty model, polished 304 stainless steel contacts, trough measures 96" long x 46" wide x 51" deep, with mirror interior finish, 6mm shell thickness. Includes 2-piece hinged cover with backrest and safety grates. 5-1/4" solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 65mm wide x 10mm thick inner ribbon, 25 RPM ribbon speed. Mixer is driven by 40 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 8" center bottom discharge, knife style pneumatic slide gate, 23-1/2" discharge height. Stainless steel frame & legs.
  18. Mixer, Ribbon, 100 CF, 304 S/st, 40 HP, New, HD, H731069

    Mixer, Ribbon, 100 CF, S/st, 15 HP, Jkt,

    Stock Number: D740751

    Stainless steel jacketed ribbon mixer, manufactured by Munson, 100 cubic foot working capacity. Trough measures 42" wide X 108" long X 47" deep. 10" center bottom outlet. Jacket is rated for 127 PSI @ 353 Deg F. Driven by 15 HP, 460V, 3/60Hz motor with gear reducer. Good condition.
  19. Mixer, Ribbon, 100 CF, S/st, 15 HP, Jkt,

    Mixer, Ribbon, 95 CF, Dbl, C/st, 3' x 12', No Drive

    Stock Number: C542223

    Mixer, ribbon, 95 cubic foot, 36" x 12', double ribbon with a 1-1/2" x 1/2" outer ribbon and 1-1/2" x 1/2" inner ribbon. Unit has 8" diameter end bottom discharge, less drive.
  20. Mixer, Ribbon, 95 CF, Dbl, C/st, 3' x 12', No Drive

    Mixer, Ribbon, 95 CF, C/st, 3'x12', 30 HP, Covers, Legs (2)

    Stock Number: A737988

    (2) Mixer, ribbon, 95 cu.ft., 36" diameter x 12' long, double ribbon with 1-1/2" x 1/2" outer ribbon and 1-1/2" x 1/2" inner ribbon. Unit has carbon steel covers, 8" diameter end bottom discharge. Unit is complete with 30 HP gearhead motor drive, mounted on legs with discharge at approx. 4' off ground. Recently added aluminum top access doors with door switches, along with forklift pockets and seismic support stands. Unit is in good condition.
  21. Mixer, Ribbon, 95 CF, C/st, 3'x12', 30 HP, Covers, Legs (2)

    Mixer, Ribbon, 75 CF, 304 S/st, 30 HP, New, HD, H736968

    Stock Number: H736968

    New double ribbon mixer, 75 CF working capacity, heavy duty, polished 304 stainless steel contacts, 86" long x 42" wide x 47" deep, 6mm shell thickness, stainless steel trough with mirror interior finish. Includes 2-piece hinged cover with backrest and safety grates. 5" solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 65mm wide x 10mm thick inner ribbon. Mixer is driven by 30 HP gearhead motor thru rollerchain, rated for 25 RPM ribbon speed. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 8" center bottom discharge, knife style pneumatic slide gate, 25-7/8" discharge height. Stainless steel frame & legs.
  22. Mixer, Ribbon, 75 CF, 304 S/st, 30 HP, New, HD, H736968

    Mixer, Ribbon, 75 CF, S/st, 25 HP, Sanitary,

    Stock Number: S740749

    Stainless steel 75 Cubic Foot Double Ribbon Mixer. Inside trough measures 42" wide x 86" long x 47" deep. 8" center bottom outlet. Mill finish exterior and mirror polished finish interior. Double ribbon design agitator constructed of stainless steel material. 5" diameter main shaft arranged for center bottom discharge. All contact parts ground and polished to mirror finish. Removable agitator shaft. Split, two-piece top cover with safety grate beneath. Proximity switch furnished for customer hook up. Pneumatically operated knife gate valve discharge. 8" diameter opening. Furnished with discharge valve guard. Glands are stainless steel split housings supplied with Teflon rope packing. Heavy duty self-aligning outboard pillow block support bearings. 25 HP 3 PH/60Hz/230-460 volt TEFC enclosure gear motor.
  23. Mixer, Ribbon, 75 CF, S/st, 25 HP, Sanitary,

    Mixer, Ribbon, 70 CF, S/st, 20 HP, Single Ribbon,

    Stock Number: A738947

    Single ribbon mixer, ribbon measures 36" diameter X 96" long, approximately 70 cubic foot total capacity, all stainless steel construction, includes center bottom discharge with pneumatic valve. Also includes pneumatically operated lids. Mixer is elevated to accommodate tote underneath. Ribbons are driven by 20 HP motor thru belt drive and gearbox. Good condition.
  24. Mixer, Ribbon, 70 CF, S/st, 20 HP, Single Ribbon,

    Mixer, Ribbon, 64 CF, C/st, 3' x 8' x 39", (2)

    Stock Number: S735014

    (2) Ribbon mixer, 64 cu. ft., 36" diameter x 8' long, double ribbon with 1-1/2" x 1/4" outer ribbon and 1-1/2" x 3/16" inner ribbon. (1) has 6" diameter end bottom discharge (1) has 6" diameter center bottom discharge, less discharge gate on both. Unit was mezzanine mounted, no legs, no covers. Unit offered as-is, need sandblast and paint.
  25. Mixer, Ribbon, 64 CF, C/st, 3' x 8' x 39", (2)

    Mixer, Ribbon, 60 CF, C/st, 10 HP, Strong Scott, Mdl IM 60

    Stock Number: S740691

    Strong Scott double ribbon mixer, Model number I.M. 60, 60 CF capacity, carbon steel construction. Ribbon assembly is driven by 10 HP motor thru gearbox and chain & sprocket assembly, resulting in 28 RPM ribbon speed. Complete with center bottom outlet with manual slide gate valve. Serial number 1803. Good condition.
  26. Mixer, Ribbon, 60 CF, C/st, 10 HP, Strong Scott, Mdl IM 60

    Mixer, Ribbon, 50 CF, 304 S/st, 25 HP, New, HD,

    Stock Number: H731066

    New double ribbon mixer, 50 CF working capacity, heavy duty Model, polished 304 stainless steel contacts, trough measures 78" long x 36" wide x 39" deep, with mirror interior finish, 6mm shell thickness. Includes 2-piece hinged cover with backrest and safety grates. 4-1/2" solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 65mm wide x 10mm thick inner ribbon, 36 RPM ribbon speed. Mixer is driven by 25 HP, gerhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 6" center bottom discharge, knife style pneumatic slide gate, 34-1/8" discharge height. Stainless steel frame & legs.
  27. Mixer, Ribbon, 50 CF, 304 S/st, 25 HP, New, HD,

    Mixer, Ribbon, 50 CF, C/st, 25 HP, Double Ribbon,

    Stock Number: S738431

    Ribbon mixer, 50 cubic feet capacity, carbon steel construction, double ribbon. Trough measures 87" long x 36" wide x 41" deep, outer ribbon is 1" wide x 3/8" thick, inner ribbon is 3" wide x 1/4" thick, on common 3-1/2" diameter center shaft. Includes 9" x 10" side bottom discharge. Ribbons are driven by 25 HP, 220/440 volt, 875 RPM motor.
  28. Mixer, Ribbon, 50 CF, C/st, 25 HP, Double Ribbon,

    Mixer, Ribbon, 50 CF, C/St, Ensign Equipment, Vertical

    Stock Number: S740470

    Vertical ribbon mixer, approximately 50 cubic foot capacity. Unit is designed for continuous operation with pneumatic feed. Chamber measures 48" diameter X 36" straight side with 36" cone bottom. Includes 8" square discharge through rotary airlock valve powered by a 3/4 HP, 3/60 Hz, 230/460 Volt motor. Mixer includes approximately 5 HP main drive through gearbox with 41.94:1 ratio. Includes controls. Good condition.
  29. Mixer, Ribbon, 50 CF, C/St, Ensign Equipment, Vertical

    Mixer, Ribbon, 36 CF, S/st, Ribbon Only, Less Trough

    Stock Number: S545372

    Mixer, ribbon, 36 cu. ft., stainless steel, ribbon only, sanitary design. Ribbon assembly is complete with 3" diameter shaft, 5" flange at each end. Inner and outer ribbons are 3/16" x 1-3/8" wide designed for center bottom discharge. Overall dimensions of ribbons measure 31" diameter x 67" long.
  30. Mixer, Ribbon, 36 CF, S/st, Ribbon Only, Less Trough

    Mixer, Ribbon, 36 CF, C/st, 10 HP

    Stock Number: A737989

    Ribbon mixer, 36 cu.ft. working capacity. Unit is carbon steel, measures 30" wide x 6'6" long with end bottom discharge 5" diameter, no valve. Unit is open top with 1/2 hinged cover. Drive is 10 HP, 208/230/460V straight motor with V-belt to torque arm reducer. Unit is in good condition, needs cleaning and paint.
  31. Mixer, Ribbon, 36 CF, C/st, 10 HP

    Mixer, Ribbon, 35 CF, 304 S/st, 20 HP, New, HD,

    Stock Number: H736047

    New double ribbon mixer, 35 CF working capacity, heavy duty, polished 304 stainless steel contacts, 64" long x 33" wide x 36" deep, 4mm shell thickness, stainless steel trough with mirror interior finish. Includes 2-piece hinged cover with backrest and safety grates. 3-3/4" diameter. Solid stainless steel shaft, 50mm wide x 12mm thick outer ribbon, 50mm wide x 10mm thick inner ribbon, mixer is driven by 20 HP gearhead, washdown motor, thru rollerchain & sprocket. Ribbons rotate at 37 RPM. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 6" center bottom discharge, knife style pneumatic slide gate, 24-3/4" discharge height. Stainless steel frame & legs.
  32. Mixer, Ribbon, 35 CF, 304 S/st, 20 HP, New, HD,

    Mixer, Ribbon, 30 CF, S/st, 10 HP, JH Day, Double Ribbon

    Stock Number: S740277

    Stainless steel double ribbon mixer, Approximately 30 cubic feet capacity. Unit is manufactured by J.H. Day. Trough measures 72" Long x 32" Wide x 30" Deep. Includes dual-compartment hinged lid. Unit has a 6" diameter manually operated center bottom outlet. Complete with start/stop switch. Previously driven by 10 HP, 208-220/440 Volt Reliance motor through gearbox (motor still available - frame is damaged). Mounted on four mild steel legs with foot pads. Serial number 80742.
  33. Mixer, Ribbon, 30 CF, S/st, 10 HP, JH Day, Double Ribbon

    Mixer, Ribbon, 30 CF, S/st, 15 HP, JH Day,

    Stock Number: A740353

    Double Ribbon mixer, manufactured by J.H. Day, 30-cubic foot capacity. Unit has stainless steel contacts. Includes dual compartment plastic hinged lid. Driven by 15 HP, 3/60 Hz motor. Previously used in manufacture of nutritional supplements. Very good condition.
  34. Mixer, Ribbon, 30 CF, S/st, 15 HP, JH Day,

    Mixer, Ribbon, 25 CF, 304 S/st, 15 HP, New, HD, H737140

    Stock Number: H737140

    New double ribbon mixer, 25 CF working capacity, heavy duty model, polished 304 stainless steel contacts, trough measures 58" long x 29" wide x 32" deep, with mirror interior finish, 4mm shell thickness. Includes hinged cover with backrest and safety grate. 3" solid stainless steel shaft, 50mm wide x 10mm thick outer ribbon, 50mm wide x 10mm thick inner ribbon, 44 RPM ribbon speed. Mixer is driven by 15 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 6" center bottom discharge, knife style pneumatic slide gate, 29-1/4" discharge height. Stainless steel frame & legs.
  35. Mixer, Ribbon, 25 CF, 304 S/st, 15 HP, New, HD, H737140

    Mixer, Ribbon, 20 CF, S/st, Single Ribbon, 84" x 18" x 22"

    Stock Number: S739489

    Single ribbon mixer, approximately 20 CF working capacity, stainless steel construction. Trough measures 84" long x 18" wide x 22" deep, and includes stainless steel shaft, measuring 1.375" dia. x 91" long ribbon, with 3" wide x 1/8" thick ribbon, Mixer has a 4" side bottom discharge. 46" discharge height. Less drive. Stainless steel frame & legs, on caster.
  36. Mixer, Ribbon, 20 CF, S/st, Single Ribbon, 84" x 18" x 22"

    Mixer, Ribbon, 20 CF, S/st, Single Ribbon, 2 HP, Cari-Mach,

    Stock Number: S739491

    Single ribbon mixer, approximately 20 CF working capacity, manufactured by CariMach (Watsonville, CA), stainless steel construction. Trough measures 82" long x 18" wide x 22" deep. Includes 2-1/4" diameter stainless steel shaft with 1-5/8" wide x 3/8" thick ribbons. Complete with 2 HP, 230/460V, 1725 RPM, 3/60Hz gear motor with 60:1 ratio, through chain & sprocket (Less chain). Mixer has (2) 4" side bottom discharge, one on each side, 75" discharge height. Mounted on stainless steel frame & catwalk.
  37. Mixer, Ribbon, 20 CF, S/st, Single Ribbon, 2 HP, Cari-Mach,

    Mixer, Ribbon, 15 CF, 304 S/st, 10 HP, New, Std

    Stock Number: H731062

    New double ribbon mixer, 15 CF working capacity, polished 304 stainless steel contacts, trough measures 48" long x 25" wide x 29" deep, with mirror interior finish, 4mm shell thickness, includes hinged cover with backrest and safety grate. 2-1/2" solid stainless steel shaft, 38mm wide x 6mm thick outer ribbon, 38mm wide x 6mm thick inner ribbon, 46 RPM ribbon speed. Mixer is driven by 10 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 5" center bottom discharge, knife style pneumatic slide gate, 31" discharge height. Stainless steel frame & legs.
  38. Mixer, Ribbon, 15 CF, 304 S/st, 10 HP, New, Std

    Mixer, Ribbon, 15 CF, S/st, 2 HP, (3)

    Stock Number: D736874

    (3) Ribbon, mixer, 15 cu.ft. working capacity, stainless steel, single ribbon 3" deep x 3/8" thick, center shaft 4 1/2" inside chamber, 3 1/4" at bearings, mixer inside 5'long x 25" deep x 22" wide x 12" high, hopper above mixing chamber with hinged lid, 6" end discharge with air gate, single chain drive with 2 HP, voltage: 3/60/230/460/1750 RPM gearhead motor, with 40 to 1 ratio, mounted on 3" x 6" carbon steel frame, overall dimensions: 75" long x 77" wide x 50" high.
  39. Mixer, Ribbon, 15 CF, S/st, 2 HP, (3)

    Mixer, Ribbon, 400 lb., S/st, Salads, Fillings, Lift, Tilt,

    Stock Number: A740700

    Stainless steel ribbon/paddle mixer, rated for up to 400 lbs. Designed for mixing of salads, fillings or similar products, previously used on salad mixtures. All stainless steel construction, internals include shaft with curved ribbon/paddles on each side of shaft. The mixing trough is secured to a vertical lift system to raise and lower trough, as well as tilt. Complete with controls. Good condition.
  40. Mixer, Ribbon, 400 lb., S/st, Salads, Fillings, Lift, Tilt,

    Mixer, Ribbon, 10 CF, 304 S/st, 5 HP, New, Std

    Stock Number: H731060

    New double ribbon mixer, 10 CF working capacity, polished 304 stainless steel contacts, trough measures 43" long x 22" wide x 26" deep, with mirror interior finish, 4mm shell thickness, includes hinged cover with backrest and safety grate. 2-1/2" solid stainless steel shaft, 38mm wide x 6mm thick outer ribbon, 38mm wide x 6mm thick inner ribbon, 61 RPM ribbon speed. Mixer is driven by 5 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 5" center bottom discharge, knife style pneumatic slide gate, 31-3/4" discharge height. Stainless steel frame & legs.
  41. Mixer, Ribbon, 10 CF, 304 S/st, 5 HP, New, Std

    Mixer, Ribbon, 10 CF, C/st, Day, Dbl Ribbon, 3 HP,

    Stock Number: S545861

    J.H. Day ribbon mixer, 10 cu. ft., carbon steel, double ribbon. Unit has porcelain bottom mixing chamber, ribbon size 1/2" x 1", driven by 3 HP gearhead motor, 230/460V. Shaft size is 1-3/8", overall dimensions are 2' x 5' x 5'. Unit has center bottom discharge, 3-1/2".
  42. Mixer, Ribbon, 10 CF, C/st, Day, Dbl Ribbon, 3 HP,

    Mixer, Ribbon, 5 CF, 304 S/st, 3 HP, New, Std

    Stock Number: H731061

    New double ribbon mixer, 5 CF working capacity, polished 304 stainless steel contacts, trough measures 32" long x 18" wide x 22" high, with mirror interior finish, 1/10" shell thickness. Hinged cover with backrest, safety grates. 2-1/4" solid stainless steel shaft, 1-1/2" x 1/4" thick outer ribbon, 1-1/5" x 1/4" thick inner ribbon, 66 RPM ribbon speed. Mixer is driven by 3 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 4" center bottom discharge, knife style pneumatic slide gate, 14" discharge height. Stainless steel frame & legs.
  43. Mixer, Ribbon, 5 CF, 304 S/st, 3 HP, New, Std

    Mixer, Ribbon, 5 CF, C/st, Day,

    Stock Number: S546526

    Mixer, ribbon, J.H. Day, 5 cu. ft. working capacity, 17" w x 37" long, carbon steel, in fair condition, complete with gearbox to jack shaft drive, less motor. End discharge.
  44. Mixer, Ribbon, 5 CF, C/st, Day,

    Mixer, Ribbon, 5 CF, S/st, 3 HP, Sanitary,

    Stock Number: S740748

    Stainless steel 5 Cubic Foot Double Ribbon Mixer. Inside trough measures 32" wide X 18" long X 22" deep. 3.5" center bottom outlet. Mill finish exterior and mirror polished finish interior. Double ribbon design agitator constructed of stainless steel material. 2 1/4" Diameter Main Shaft arranged for bottom discharge. All contact parts ground and polished to mirror finish. Removable Agitator Shaft. One-piece top cover. Top of cover furnished with hinged and gasketed hatch openings with integral safety grate beneath. Proximity switch furnished for customer hook up. Pneumatically operated gate valve discharge. 3.5" diameter opening. Stainless Steel on all product contact areas. Furnished with discharge valve guard. Glands are Stainless Steel housings supplied with Teflon Rope Packing. Heavy duty self-aligning outboard pillow block support bearings. 3 HP 3 PH/60Hz/220-440 volt TEFC enclosure Gear Motor, Chain driven to Agitator Shaft arranged for 65 RPM output Agitator speed.
  45. Mixer, Ribbon, 5 CF, S/st, 3 HP, Sanitary,

    Mixer, Ribbon, 2.5 CF, 304 S/st, 2 HP, Std, New,

    Stock Number: H733850

    New double ribbon mixer, 2.5 CF working capacity, polished 304 stainless steel contacts, 26" long x 14" wide x 18" deep, 3mm shell thickness, stainless steel trough with mirror interior finish. Hinged includes hinged cover with backrest and safety grate. 1-5/8" solid stainless steel shaft, 38mm wide x 6mm thick outer ribbon, 30mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 2 HP direct connect motor. Mixer has a 4" center bottom discharge, knife style pneumatic slide gate, 23" discharge height. Stainless steel frame & legs.
  46. Mixer, Ribbon, 2.5 CF, 304 S/st, 2 HP, Std, New,

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std,

    Stock Number: H733613

    New double ribbon mixer, 1 CF working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, knife style pneumatic slide gate, 10" discharge height. Stainless steel frame & legs.
  47. Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std,

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, S737859

    Stock Number: S737859

    New lab double ribbon mixer, 1 cu. ft. working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP, 220 volt, 3-phase direct connect motor. Mixer has a 2-1/4" center bottom discharge, knife style pneumatic slide gate, 10" discharge height. Stainless steel frame & legs.
  48. Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, S737859

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Stock Number: H738865

    New double ribbon mixer, 1 CF working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, manually operated butterfly valve, 10" discharge height. Includes split seals that are set up for liquid service. Stainless steel frame & legs.
  49. Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Stock Number: S738978

    New double ribbon mixer, 1 CF working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, manually operated butterfly valve, 9-1/2" discharge height. Includes split seals that are set up for liquid service. Stainless steel frame & legs.
  50. Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Stock Number: S739679

    New double ribbon mixer, 1 CF working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, manually operated butterfly valve, 10" discharge height. Includes split seals that are set up for liquid service. Stainless steel frame & legs.
  51. Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, Liquid

    Mixer, Ribbon, 1 CF, 304 S/st, 1 HP, New, Std, S739678

    Stock Number: S739678

    New double ribbon mixer, 1 CF working capacity, polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, knife style pneumatic slide gate, 10" discharge height. Stainless steel frame & legs.

51 Item(s)

per page

Set Ascending Direction

Please wait...