Raymond Mill

9 Item(s)

per page

Set Descending Direction
  1. C738790_A

    Mill, Raymond, Bowl, Mdl 573, 26,000# coal/hr

    Stock Number: C738790

    Raymond bowl mill, Model 573, coal pulverizer. Last used to fire rotary kiln in cement plant rated at 26,500 pounds per hour on coal. Requires 250 HP motor.
  2. C731945_A

    Mill, Raymond, Imp, 51, 200 HP,

    Stock Number: C731945

    ABB raymond, IMP mill, Model number 51. Last used 200 HP direct connected motor (not available). Included is a spare rotor, shaft and mounting base for motor. Last used on talc, new 1985, serial number 85074.
  3. D739613_A

    Mill, Raymond, Imp, Model 83, 400 HP, Pre-Heater

    Stock Number: D739613

    Raymond Impact mill, Model 83, IMP Mill, driven by 400 HP motor, 893 RPM, 460 Volt, Amps 475 deg. F. Hammers measure 22" long. Body housing is constructed of stainless steel. Complete with fan driven by 200 HP motor. Also includes classifier and pre-heater. Good condition.
  4. Mill, Raymond, Screen, #1, 18" X 24", Est 25 HP,

    Mill, Raymond, Screen, #1, 18" X 24", Est 25 HP,

    Stock Number: Z517890

    Screen mill, raymond, Model #1, with 8" x 15" feed opening, 18" x 24" grinding chamber, carbon steel contacts, reversible hammers, and no drive (requires approx 25 HP). capacity of unit is 2000# to 1500#/hr depending on material. Serial number 33100.
  5. C739841_A

    Mill, Roller, Raymond, 3036, Double Whizzer, 1962

    Stock Number: C739841

    Raymond Roller Mill, model 3036 High Side. Unit is complete with double whizzer, and bare mill. Motors are not included. Rolls, ring, and gears are all in very good condition. New in 1962. Serial number 62147.
  6. C739837_A

    Mill, Roller, Raymond, 5448, Complete System

    Stock Number: C739837

    Raymond Roller Mill, model 5448 High Side, complete system. Unit is still installed and includes main motor, fan with motor, double whizzer separator, dust collector, air heater, feeder, duct work and controls. Last used on calcium carbonate. Very good condition. New in 1954. Serial number 54245.
  7. S738745_A

    Mill, Roller, Raymond, 5448, DBL Whizzer

    Stock Number: S738745

    Raymond roller mill, model 5448, 54" diameter grinding ring, 4 rolls, rated @ 5 to 7 tons per hour on limestone to 325 mesh. Double whizzer separator, feeder, some duct work and spare parts. Last used on lime. Serial number 86073, new 1986, less motors.
  8. C739838_A

    Mill, Roller, Raymond, 6058, 8' Whizzer, Complete

    Stock Number: C739838

    Raymond Roller Mill, model 6058 High Side, complete system, still installed. Includes 8' diameter whizzer separator, air heater, main motor, fan with motor, feeder, dust collector, duct work and controls. Last used on calcium carbonate. Unit is in good condition, new in 1943. Serial number 43208.
  9. C739840_A

    Mill, Roller, Raymond, 6058, Double Whizzer, 1979

    Stock Number: C739840

    Raymond Roller Mill, Model 6058. Unit is incomplete, missing some components, includes 8' espanded-side double whizzer (serial number 80044), gears and ring in excellent condition. Built in 1979. Serial number 79041. See .pdf file for list of components.

9 Item(s)

per page

Set Descending Direction

Please wait...