+1-415-467-3400

Heat Exchanger



Items 1 to 10 of 54 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. Heat Exchanger, Shell & Tube, 21,433 SF, S/st, Water Cooled,

    Stock Number: H736139

    Heat exchanger, 21,433 SF of 1.05" OD X. 049 304 stainless steel tube. Manufactured by Niagara Blower, Model number 44029-SL. Evaporative water cooled, last used on cooling demineralized water, (4) fans, 12' diameter with 75 HP each, 4 tube bundles, 564 tubes x 35' long, cooled 3,800 gallons per minute of water from 146 F to 85 F at 50 PSI. Excellent condition. Complete with pumps and accessories.
  2. Heat Exchanger, Shell & Tube, 21,433 SF, S/st, Water Cooled,

    Heat Exchanger, Shell & Tube, 3800 SF, S/st,

    Stock Number: Z419500

    Patterson-Kelley shell & tube heat exchanger, 3800 sq.ft., with (1613) 3/4" od T304 stainless steel tubes, 12' long, single pass, vertical condenser. Overall dimensions 42" inside diameter carbon steel shell x 20' long. 150 PSI shell side, 15 PSI tube side. Serial number 17733 nb #11081. 1" triangular pitch.
  3. Heat Exchanger, Shell & Tube, 3800 SF, S/st,

    Heat Exchanger, Plate, 2200 SF, Bell & Gossett, S/st, 150 PSI,

    Stock Number: C738739

    Bell & Gossett plate type heat exchanger, rated for 2200 sq. ft. of surface area, rated for 150 PSI @ 257 deg. F, includes 18" wide x 60" long stainless steel plates. Heat exchanger includes frame and overhead rail to open and close plate stack. Certified by ITT. Bell & Gossett serial number 111761-01. Unused and in excellent condition.
  4. Heat Exchanger, Plate, 2200 SF, Bell & Gossett, S/st, 150 PSI,

    Heat Exchanger, Plate, APV, 1100 SF, S/st, (240) Plates

    Stock Number: S740203

    Plate type heat exchanger, manufactured by APV Crepaco, Model R51TH, all stainless steel construction, approximately 1,100 sq. ft. surface area. Includes (240) plates measuring 16" x 61", with Rail length of 6'3", plate capacity 250 maximum, 4" sanitary clamp in/out. Serial number 33546. Previously used at food processing facility.
  5. Heat Exchanger, Plate, APV, 1100 SF, S/st, (240) Plates

    Heat Exchanger, Plate, Mueller, 1000 SF, S/st, (270) Plates

    Stock Number: S740201

    Plate type heat exchanger, manufactured by Paul Mueller, Model AT40SS B-20, all stainless steel construction, approximately 1,000 sq. ft. surface area. Includes (270) plates measuring 16" x 54", with Rail length of 8', plate capacity 286 maximum, 3" sanitary clamp in/out. Rated for 117 PSI @ 150 degrees F/32 degrees F. Serial number 90020. National Board Number 17537. Complete with plate divider. Previously used at food processing facility.
  6. Heat Exchanger, Plate, Mueller, 1000 SF, S/st, (270) Plates

    Heat Exchanger, Shell & Tube, 900 SF, Karbate,

    Stock Number: S734020

    Heat exchangers, shell & tube, approximately 900 sq ft, Karbate. Each unit has (199) tubes, 1 ΒΌ" outside diameter x 168" long, 3/16" gauge. 5 pass tube side, ASME code constructed for 75 PSI @ 338 deg. F shell side and 75 PSI @ 338 deg. F tube side. Union Karbate size 25-168, serial number 4-82N-1027-1,2,3 and 4. New 1982. Excellent condition. Last use, sea water on tube side, chilled fresh water on shell side.
  7. Heat Exchanger, Shell & Tube, 900 SF, Karbate,

    Heat Exchanger, Block, Graphite, 741 SF, 116/43 PSI

    Stock Number: S737136

    Heat Exchanger, graphite block type, 741 sq. ft. (68.9 m) process side, 391 sq. ft. (36.4 m) service side. Designed for 43 PSI (3 bar) process, 116 PSI (8 bar) service to 350 deg. F. (180 deg. C). Manufactured by GAB Neumann, type GAB-4-13-09-1, Serial number 16487-13469. New in 1997. Last used in titanium pigment process.
  8. Heat Exchanger, Block, Graphite, 741 SF, 116/43 PSI

    Heat Exchanger, Shell & Tube, 739 SF, Titanium,

    Stock Number: C737019

    Heat exchanger, shell & tube, 739 square feet, designed for 150 PSI/full vac @ 250 deg. F. on both shell & tube side. single pass, shell is type SA-106B mild steel, (484) tubes, 3/4" diameter x 96" long, constructed of type SB-338-7 welded titanium. Last used vertical. Manufactured by Titan Metal Fabricators, Camarillo, California. Model TICS-739-24-1-96-BEMV, serial number 12091-1-1, new 2007. like new condition. Prints and code papers. Empty weight 2753 pounds.
  9. Heat Exchanger, Shell & Tube, 739 SF, Titanium,

    Heat Exchanger, Shell & Tube, 638 SF, S/st, 150 PSI / 75 PSI,

    Stock Number: S422097

    Heat exchanger, shell & tube, 638 sq. ft., 196 tubes 5/8" diameter x 20', carbon steel shell, stainless steel tubes. ASME code constructed, rated for 150 PSI @ 250 deg. F on shell side, rated for 75 PSI @ 250 deg. F tube side. Last used as a gravy heater in a food operation, less heads.
  10. Heat Exchanger, Shell & Tube, 638 SF, S/st, 150 PSI / 75 PSI,

    Heat Exchanger, Shell & Tube, 600 SF, S/st,

    Stock Number: S422220

    Heat exchanger, Pfaudler, with 600 sq. ft. of transfer area. (680) 3/4" diameter stainless steel tubes x 4-1/2' long in 28" diameter single pass carbon steel shell. Both heads missing. Rated 75 PSI @ 350 deg. F. on both sides. Pfaudler serial number 42038.

Items 1 to 10 of 54 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction

Please wait...