+1-415-467-3400

Grinder


28 Item(s)

per page

Set Descending Direction
  1. Crusher, Cone, Braun, Lab, "coffee Mill", 6" Diameter,

    Stock Number: S243798

    Cone crusher, lab size Braun sample crusher, "coffee mill", 6" diameter, mounted on stand, adjustable crush size, less motor.
  2. Crusher, Cone, Braun, Lab, "coffee Mill", 6" Diameter,

    Grinder, Clinker, Lump Breaker, 5 HP, Atlantic,

    Stock Number: S734191

    Clinker grinder, lump breaker, grinding chamber measures 12" x 12", includes (13) 5/8" thick fixed steel hammers, mounted on 3-1/2" diameter shaft. Chamber has slot-type discharge with 3/4" slots. Manufactured by Atlantic Coast Crushers, Inc., model number 00518EP3E184TC, driven by 5 HP, 208-230/460V, 1745 RPM motor thru gear reducer, rotor rated for 180 RPM. Direct connect couplings also available. Includes inlet & outlet adapters to give 8" & 12" diameter openings. New in 2002. Unused and in excellent condition.
  3. Grinder, Clinker, Lump Breaker, 5 HP, Atlantic,

    Grinder, Coffee, Modern Process, Mdl. 77, Granulizer,

    Stock Number: C740816

    Modern Process Equipment coffee grinder / granulizer, Model #77. Includes two-stage grinding rolls with adjustable spacing between rolls. Grinding rolls lead to mixing/conveying section. Mixing section includes 2' long single ribbon section and 2' long pin/paddle mixing section. Bottom of mixing section includes (2) 4" x 4' discharge doors. Product drops to perforated bed with approx. 1/4" diameter perforations. Includes associated drives. Good condition.
  4. Grinder, Coffee, Modern Process, Mdl. 77, Granulizer,

    Grinder, Lump Breaker,S/st, 20 HP, (3)

    Stock Number: C739300

    (3) Lump breaker. Unit measures 21" X 30" X 21" deep. Unit has fixed hammers measuring 8-1/2" long X 3-1/2" wide X 1/4" thick. 1-1/4" spacing between alternating hammers. Includes screen with approximately 1/8" diameter perforations. Includes stainless steel housing and dome cover. Driven by 20 HP, 230/460V, 1760 rpm motor.
  5. Grinder, Lump Breaker,S/st, 20 HP, (3)

    Grinder, Meat, Biro, Mdl AFMG-52, S/st, 7.5 HP,

    Stock Number: C739372

    Biro meat mixer and grinder, model# AFMG-52. Complete with stainless steel hopper, measuring 23" x 20" x 28" deep, includes stainless steel paddle mixer with (2) 2" x 6" paddles. (1) 14" long curved paddle and (1) 16" long dual curved paddles, mounted on common shaft. Under mixing arms is 6" diameter screw discharge, extruding product through 5" diameter die plate with 1/8" diameter perforations. Hopper also includes 5" diameter bottom side access port. Auger is driven by 7-1/2 HP, 2230 Volt, 3/60 Hz motor thru chain and sprocket. Mixer serial# LR 6494-25. Grinder serial# 52309.
  6. Grinder, Meat, Biro, Mdl AFMG-52, S/st, 7.5 HP,

    Grinder, Meat, Blonco, S/st, 4" Dia., 5 HP,

    Stock Number: C734818

    Meat grinder, Blonco, stainless steel contacts, includes 19" x 30" wide preparation area with 3" high side walls, with 4" diameter opening, leading to 4" diameter screw discharge. Nameplate reads Iozelli SRL, Via Neruda-Pistoia, Italia, machine type TCN 130, mfg. # 2863. Rated for 220/440 Volt. Screw driven by 5 HP motor, direct drive thru gearbox. Good condition.
  7. Grinder, Meat, Blonco, S/st, 4" Dia., 5 HP,

    Grinder, Meat, Butcher Boy, Mdl BB-56, C/st, 6" Dia.,

    Stock Number: C320028

    Butcher Boy Model BB-56, carbon steel meat grinder. Unit is complete with Dayton AC invertor, variable speed control. Unit is complete with 10 HP, 230 volt Vac drive, unitized on stand, and in good condition. Unit does not have hopper, feed screw, grinder ring, chopper plate or knife.
  8. Grinder, Meat, Butcher Boy, Mdl BB-56, C/st, 6" Dia.,

    Grinder, Meat, Butcher Boy, Mdl BB-56, S/st, 6" Dia.,

    Stock Number: S320028

    Butcher Boy model BB-56 stainless steel meat grinder. Unit is complete with 7.5 HP drive, stainless steel chamber, stainless steel contact parts, die plate on outside of chamber is carbon steel. Unit appears to be in good condition, unitized, on stand.
  9. Grinder, Meat, Butcher Boy, Mdl BB-56, S/st, 6" Dia.,

    Grinder, Meat, General Slicing, Mdl E, Cast Alum, 1 HP

    Stock Number: S738827

    General Slicing / Red Goat disposer meat grinder. Unit is model E, has 2" inlet, on cast aluminum frame, run by 1 HP, 115 volt, single phase, 1725 RPM drive. Serial number 3000036.
  10. Grinder, Meat, General Slicing, Mdl E, Cast Alum, 1 HP

    Grinder, Meat, Globe, 40 HP, 8", Type X6151

    Stock Number: C731463

    Globe meat grinder, 8" x 14" feed section, type X6151, size 622-G-166, 8" diameter discharge, unit is driven by 40 HP, 220/440V, 3/60, 1170 RPM motor thru link-belt Herringbone gear drive, size S-80m with ratio of 3.8:1. Rated for input of 1150 RPM and output of 302 RPM. Includes screw and assembly tools. No dies.
  11. Grinder, Meat, Globe, 40 HP, 8", Type X6151

    Grinder, Meat, Hobart, Mdl 4346, 3 CF, C/st, 7.5 HP,

    Stock Number: S737276

    Hobart grinder, 3 cubic feet capacity. Unit is carbon steel contacts with stainless steel trough. Grinder has carbon steel screw auger discharge, 3" diameter Unit has hinged cover, start/stop controls, 7.5 HP, 230 volt, 1725 RPM, 3-phase motor. Grinding chamber measures 23" wide x 18" long x 24" deep. Unit is portable on stand, missing cutting head. Serial number 27-028-623.
  12. Grinder, Meat, Hobart, Mdl 4346, 3 CF, C/st, 7.5 HP,

    Grinder, Meat, Hobart, Mdl 4352, Mixer, 10 HP,

    Stock Number: C740417

    Hobart model 4352 meat mixer and grinder. Equipment includes 26" x 22" x 24" deep stainless steel hopper with mild steel, internal paddle agitator. Hopper also includes 4" diameter bottom auger that extends out the side of the hopper and discharges meat through die plate with 5/16" diameter perforations. Equipment is driven by 10 HP motor, 1725 RPM, 200 volt, 3/60Hz motor. Includes control buttons for Mix and Mix/Grind. Serial number 27-152-263. Tested and in working condition.
  13. Grinder, Meat, Hobart, Mdl 4352, Mixer, 10 HP,

    Grinder, Meat, Mince Master, S/st, 50 HP,

    Stock Number: S472300

    Mill, grinder, Griffith Labs Mince Master, serial number CR20551, machine number SWU5986. Stainless steel contacts with 8" diameter Grinding chamber and 5" diameter center core with (2) cutting knives. Screen discharge is circular approx. 1-1/2" wide with 1/20" diameter holes. Grinder is driven by 50 HP 3/60/220-440V/3460 RPM direct connected vertical motor. Previously used to grind meat.
  14. Grinder, Meat, Mince Master, S/st, 50 HP,

    Grinder, Mill, Anderson, Bronze and S/st, Hopper

    Stock Number: S738926

    Anderson manual grinder mill, bronze and stainless steel contact parts, grinding chamber measures 5" diameter x 5" long, has stainless steel hopper measuring 21" x 21" x 18" with 7/8" discharge. Unit is on carbon steel stand.
  15. Grinder, Mill, Anderson, Bronze and S/st, Hopper

    Grinder, Pelletizer, Plastic, Alsteele, #48F8, S/st, 3 HP,

    Stock Number: S414915

    Alsteele rotary blade plastics pelletizer, model 48F8. Unit features 10" wide x 10 rotary blade cutter, stainless steel contact parts. Unit has twin 3" diameter compression rollers for positive product feed. Pelletizer is driven by 3 HP us vari-drive thru adjustable speed reducer. Mounted on stand.
  16. Grinder, Pelletizer, Plastic, Alsteele, #48F8, S/st, 3 HP,

    Grinder, Pelletizer, Plastic, Cumberland, S/st, 40 HP, (2)

    Stock Number: S414850

    (2) Cumberland model 26 pelletizer, with milling type rotor, 27" wide, 60 blades. Unit designed to cut to length multiple extruder plastic strands,. 125" to. 092" diameter, up to 10,000#/hr capacity. Unit has 40 HP DC drive, complete with electricals with vari-speed driven feed rolls. Good condition. Last run on styrene plastic pellets.
  17. Grinder, Pelletizer, Plastic, Cumberland, S/st, 40 HP, (2)

    Grinder, Plastic, Alsteele, Mdl 1009, 7.5 HP

    Stock Number: S739573

    Alsteel grinder/granulator model 1009 with 1/4" perf screen, serial number 10. Unit has 5/8" x 9-1/6" feed throat, 2 knife open rotor belt driven by 7.5 hp AC motor (no motor nameplate), 48" feed tray height, bin discharge, on casters.
  18. Grinder, Plastic, Alsteele, Mdl 1009, 7.5 HP

    Grinder, Plastic, C/st, Less Drive, Parts Machine only

    Stock Number: S739665

    Plastic grinder, carbon steel. Unit is less drive, less frame, bearings/shaft worn. This unit is a parts machine only and sold as-is.
  19. Grinder, Plastic, C/st, Less Drive, Parts Machine only

    Grinder, Plastic, Foremost, 15 HP, Mdl HD6, C/st,

    Stock Number: S733907

    Foremost plastic granulator/ grinder. Unit is model HD-6 with carbon steel contact parts, complete with 15 HP motor drive, 440 volt. Unit features 18" diameter x 15" wide grinding chamber, with inlet at 14" front to back, 15" left to right. Mill designed for use with sizing screens, not included. This HD series mill is designed for beside the press applications, central grinding or recycling applications with an estimated capacity of 400#/hr. Unit is in very good condition missing feed hopper.
  20. Grinder, Plastic, Foremost, 15 HP, Mdl HD6, C/st,

    Grinder, Plastic, Foremost, 15 HP, Mdl HD6, C/st, 300#/HR

    Stock Number: S733906

    Foremost plastic granulator/ grinder. Unit is model HD-6 with carbon steel contact parts, complete with 15 HP motor drive, 440 volt. Unit features 18" diameter x 15" wide grinding chamber, with inlet at 14" front to back, 15" left to right. Mill designed for use with sizing screens, not included. This hd series mill is designed for beside the press applications, central grinding or recycling applications with an estimated capacity of 400 lbs/hr. Unit is in very good condition complete with feed hopper.
  21. Grinder, Plastic, Foremost, 15 HP, Mdl HD6, C/st, 300#/HR

    Grinder, Plastic, Scrap, Alsteele, 30 HP, Mdl 7x18

    Stock Number: S731129

    Alsteele plastic scrap grinder model 7X18. Unit driven by 30 HP direct drive, 1170 RPM, 220/440V drive motor. Chamber is 7" diameter x 18" wide with screen discharge, 6" wide x 18" feed chute. Complete mill is jacketed for water cooling. Unit complete, mounted on heavy duty base, in excellent condition Serial number 1118A.
  22. Grinder, Plastic, Scrap, Alsteele, 30 HP, Mdl 7x18

    Grinder, Plastic, Scrap, Amacoil, #HMG, 7.5 HP,

    Stock Number: S414900

    Amacoil plastic scrap grinder, model HMG (hot melt granulator), has single rotor 8" diameter x 10" face, (4) adjustable angle blades. Driven by 7-1/2 HP XP 3/60/230-460/1740 RPM motor. All carbon steel construction. With 3" x 9" wide feed throat. Has 4" diameter pneumatic discharge.
  23. Grinder, Plastic, Scrap, Amacoil, #HMG, 7.5 HP,

    Grinder, Plastic, Scrap, Amacoil, 8 X 8, C/st, 2 HP,

    Stock Number: S414920

    Amacoil plastic scrap grinder, Size 8 x 8. Unit driven by approx 2 HP main motor drive, 2 rotating blades and 2 stationary blades. Unit has 6" diameter auger conveyor discharge x 36" long. Auger conveyor independently driven by 1/4 HP gearhead motor drive. Good condition. Serial number 0279130.
  24. Grinder, Plastic, Scrap, Amacoil, 8 X 8, C/st, 2 HP,

    Grinder, Plastic, Scrap, Cumberland, Size 7 X 10,

    Stock Number: S734538

    Plastic scrap grinder, manufactured by Cumberland, Size 7 X 10, carbon steel construction, with 8" x 8" opening, leading to grinding chamber. Serial# 39000-6055. Appears to be in good condition.
  25. Grinder, Plastic, Scrap, Cumberland, Size 7 X 10,

    Grinder, Plastic, Scrap, LR Stystems, 12" X 24", 50HP

    Stock Number: A740578

    Plastic scrap grinder, manufactured by LR Systems. Grinding chamber measures 12" X 24". Unit driven by 50 HP drive. Includes 5 HP blower. Rated for approximately 1,500 lbs/hr. Good condition.
  26. Grinder, Plastic, Scrap, LR Stystems, 12" X 24", 50HP

    Grinder, Plastic, Scrap, Peeco, P12/4, 5 HP,

    Stock Number: Z414910

    Peeco plastic scrap grinder, Model P12/4, with 5 HP motor, 70 PSI hydraulic air pressure, 500 RPM max motor speed, 12" wide rotor with 4 knives and is designed for cutting plastic sheets.
  27. Grinder, Plastic, Scrap, Peeco, P12/4, 5 HP,

    Grinder, Plastic, Shredder, Shred-Pax, C/st, 10 HP,

    Stock Number: C414760

    Shred-Pax plastic shredder, Model AZ-7 SNP. Shredder is a 2-stage machine with 12" diameter x 16" face top shredding roll driven by 10 HP and cram fed by vertical pneumatic cylinder. Second stage has (2) 6" diameter x 16" face overlapping shredder rotors each driven by 1-1/2 HP gearhead motors. All carbon steel construction and mounted on structural steel frame. Previously shredded plastic bottles. Lots of spares. Serial number 380-8932.
  28. Grinder, Plastic, Shredder, Shred-Pax, C/st, 10 HP,

    Grinder, Shredder, 12" x 48", Alsteele, 50 HP

    Stock Number: S737905

    Alsteele grinder / shredder. Unit is type HD 12x48, with carbon steel contact parts. Unit has 50 HP, 220/440V, 1770 RPM drive. Unit features 12" x 48" grinding chamber with hopper, 4' x 3' x 30" tall. Unit mounted on 4' tall base, less screen. Serial number 364A.

28 Item(s)

per page

Set Descending Direction

Please wait...