+1-415-467-3400

Filter

Items 1 to 100 of 130 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Filter, Air, Hepa Cart, S/st,

    Stock Number: S737483

    Stainless steel HEPA cart. Unit manufactured new in 2008, is model HEPACART, with average velocity of 93 FPM. Unit measures 2' x 26" x 26" tall interior. Serial number 111072.
  2. Filter, Air, Hepa Cart, S/st,

    Filter, Air, Inline, Camfil, 8" In/out,

    Stock Number: S738614

    Inline air filter, manufactured by Camfil, model 2EP-AL-26-1000-1, size 610 x 610 x 292. Unit has a nominal airflow of approximately 77,000 cubic feet/hour through 8" inlet/outlet. Includes pre-filler and secondary filler. Complete with Venti Oelde blower, serial # 169078. Blower driven by approximately 5 HP drive.
  3. Filter, Air, Inline, Camfil, 8" In/out,

    Filter, Belt, Vac, 2' X 23-1/2' Komline Sanderson, 10 HP,

    Stock Number: C739148

    Komline Sanderson ADPEC vacuum belt filter, belt area measures 24" wide X 23-1/2' long, model 25MX375, size 10.4 sq/ft, machine number SD-31. Unit has vacuum tray length of 150", trays are polypropylene, Fiberglass frame with some stainless steel parts. 18.0 scfm, (80 PSIG min @ 15 sec cycle time) Filter complete with has Nash pump, size AT-124, 10 HP, 230/460 volt, 1725 RPM motor drive. Previously used with 40 micron belt. (less belt). Good condition.
  4. Filter, Belt, Vac, 2' X 23-1/2' Komline Sanderson, 10 HP,

    Filter, Belt, Vac, 3-1/2' X 30', 316L S/st, Eimco, C737175

    Stock Number: C737175

    Eimco belt filter, 316L stainless steel, 42" wide x 30' long, includes belt with stainless steel pan mounted below belt with 4-1/2" diameter horizontal stainless steel pipe running down length with (16) 3-1/2" welded vertical pipes on 20" centers, carbon steel frame with plastic drip pan. Includes 4-lane applicator head, pneumatic adjustment on rollers, (4) overhead spray bars, (3) 24" diameter X 60" high stainless steel vac. receiver tanks, Eimco 1x8 stainless steel centrifugal pumps rated for 140 liters/min at 15" w.c. with 1700 impeller RPM. Complete with Honeywell controls. Serial# 9802206. New in 1998. Appears to be in very good condition.
  5. Filter, Belt, Vac, 3-1/2' X 30', 316L S/st, Eimco, C737175

    Filter, Belt, Vac, 8' X 24', 316 S/st, Eimco, 25 HP,

    Stock Number: Z386602

    Filter, horizontal vacuum belt, 8' wide x 24' long, 316 stainless steel and frp construction. Eimco number 9624. filter has 189 sq.ft. filter area driven by 25 HP vari-speed (1180/178) Reeves drive, gearbox, and roller chain drive. Unitized on structural steel frame.
  6. Filter, Belt, Vac, 8' X 24', 316 S/st, Eimco, 25 HP,

    Filter, Belt, Vac, 8' X 24', S/st, Eimco, 25 HP,

    Stock Number: Z386604

    Filter, horizontal vacuum belt, Eimco, 8' wd x 24', stainless steel, polypropylene contact with a rubber belt and filter cloth, 189 sq.ft. filter area driven by 25 HP variable speed main motor drive, stainless steel drip pan, four zone with vacuum hook-up lines, etc.
  7. Filter, Belt, Vac, 8' X 24', S/st, Eimco, 25 HP,

    Filter, Cartridge, 10" x 42", S/st, Pall, 50 PSI

    Stock Number: C740338

    Pall jacketed filter housing, 316 stainless steel sanitary, T-type, maximum pressure: liquid 120 psig @ 150 degrees F, jacket 50 psig @ 150 degrees F, inlet & outlet 1-7/8" (takes 4 cartridges) housing size 10" diameter x 42" straight side cartridges 2-1/2' diameter x 42" portable, product number HOO481C, serial number 23245.
  8. Filter, Cartridge, 10" x 42", S/st, Pall, 50 PSI

    Filter, Cartridge, 30" X 30", 6", (3)

    Stock Number: C739286

    (3) Cartridge Filter, 30" diameter X 30" straight side. Unit has a 6" diameter outlet and a removable clamped lid. Manufactured by Rain for Rent.
  9. Filter, Cartridge, 30" X 30", 6", (3)

    Filter, Cartridge, 304 S/st, 42" X 25", Fulflo, (2)

    Stock Number: C740826

    (2) Cartridge Filter, manufactured by Fulflo, model # 6LMP52-3-6FK1, 304 stainless steel construction. Housing measures 25" diameter X 42" straight side with 6-1/2" inlet and 2-1/2" outlet. Includes fifty two (52) cartridge holders. Unit has a maximum working pressure of 120 PSI @ 250 deg F with maximum operating temperature of 300 deg F. Unit has a bolted lid with horizontal swinging door. National Board # 15365. New in 1995.
  10. Filter, Cartridge, 304 S/st, 42" X 25", Fulflo, (2)

    Filter, Cartridge, 304 S/st, 45" X 21", Fil-Trek, (5)

    Stock Number: C740825

    (5) Cartridge Filter, manufactured by Fil-Trek, model # FS020 035D4S6F6, 304 stainless steel construction. Housing measures 21" diameter X 45" straight side with 6-1/2" inlet and 2-1/2" outlet. Includes thirty five (35) cartridge holders. Unit has a maximum working pressure of 150 PSI @ 250 deg F. Unit has a bolted lid with horizontal swinging door. Hydro tested for 195 PSI. Serial # V905, new in 2000.
  11. Filter, Cartridge, 304 S/st, 45" X 21", Fil-Trek, (5)

    Filter, Cartridge, 304 S/st, Cuno, Mdl PTS1, (2)

    Stock Number: S739597

    (2) Cuno model PTS1 cartrige filter, 304 stainless steel construction, 100 PSIG max @ 200 deg f, flow rate up to 60 gpm. Unit uses up to (4) 12" dia filter cartridges.
  12. Filter, Cartridge, 304 S/st, Cuno, Mdl PTS1, (2)

    Filter, Cartridge, 316 S/st, (2) 6" x 36", Adams,

    Stock Number: S371999

    R.P. Adams cartridge filter station, with (2) 6" x 36" filters, rated at 150 PSI. Unit is type 316 stainless steel, complete with 2" diameter stainless piping, manifold, 3-way diverter valve. Unit is type WJR-1A, Serial number 219131 and 219132. Complete station unitized on stainless steel frame with electric control box with backwash controls. System appears to be in excellent condition. Filter manufactured by R.P. Adams Company, Buffalo, NY.
  13. Filter, Cartridge, 316 S/st, (2) 6" x 36", Adams,

    Filter, Cartridge, 6' x 21", S/st, Pall, 150 PSI

    Stock Number: S740065

    Pall Trinity Micro Tri-Cor23325 stainless steel filter housing. Max Operating Pressure is 150 PSIG @ 450 degrees F, shell thick, 109 inches. Housing Dimensions: 6" diameter x 21" high. This unit accepts (3) filter cartridges, 2-3/4" diameter x 19" long, filter cartridges, 2" NPT female In & Out.
  14. Filter, Cartridge, 6' x 21", S/st, Pall, 150 PSI

    Filter, Cartridge, Amiad, Mdl SAF-6000, Self Cleaning,

    Stock Number: C740875

    Amiad model SAF 6000 self cleaning filter, 10" diameter in/out, consists of weave wire element type, rated for up to 150 PSI @ 176 degrees F. SAF 6000 model is rated for up to 1,760 GPM. Previously used with reverse osmosis filtration system. Serial number 000833. Rated for 110/220 V, 3/60 Hz.
  15. Filter, Cartridge, Amiad, Mdl SAF-6000, Self Cleaning,

    Filter, Cartridge, Central Filter, S/st, 6 Cart,

    Stock Number: C733890

    Central Filter Mfg cannister style cartridge filter, Model CFH-6B-H. Unit has 316 stainless steel contact parts designed to accommodate 6 style B cartridges. Unit has 2" in/out ports with removable top with 4 hold-down bolts. Unit is polished and suitable for food or beverage service, last used in beer filling line as polishing filter.
  16. Filter, Cartridge, Central Filter, S/st, 6 Cart,

    Filter, Cartridge, Cuno, S/st, Mdl 22DC3, 125 PSI, 200 gpm

    Stock Number: S740317

    Cuno model 22DC3 cartridge filter, 304 stainless steel, 125 PSI max @ 200 deg f, flow rate up to 200 gpm. Unit used 2-5/8" dia x 30" tall filter cartridge, connection size 4" flange. Catalong number 4427-01.
  17. Filter, Cartridge, Cuno, S/st, Mdl 22DC3, 125 PSI, 200 gpm

    Filter, Cartridge, FulFlo, S/st, Mdl 264044sf134fk1, 150 PSI

    Stock Number: S740318

    Fulflo Cartridge Filter, Stainless Steel, Model 264 04-4sf1-3-4fk1,26404-9102-153-0018-9053,Pressure 150 PSIG @ 300 F, 2" inlet and outlet, Filter is 8.5" diameter x 22" deep, Filter holds (18) 24"long filter cartridges, SN 9053,Top head thk 1-3/16",bottom head thk 3/16", year built 1982 Filter is mounted on a stand.
  18. Filter, Cartridge, FulFlo, S/st, Mdl 264044sf134fk1, 150 PSI

    Filter, Cartridge, S/st, 10" X 26-1/2", Capital, (2)

    Stock Number: S371996

    (2) Cartridge filter, stainless steel, 10" x 26-1/2", manufactured by Capital Westward Corp. Unit is cannister only. Filter has 4" in/out, rated for 250 PSI. Model WF/5120/74M, serial number J1221R, sanitary design last used in pharmaceutical operation.
  19. Filter, Cartridge, S/st, 10" X 26-1/2", Capital, (2)

    Filter, Cartridge, S/st, 10" X 32", Meeco, 150 PSI,

    Stock Number: S740085

    Stainless steel catridge filter, manufactured by Meeco, part number SN1D37EA-0SN1S, serial number 6506. Chamber measures 10" diameter X 32" straight side with 2" inlet/outlet. Rated for 150 PSI @ 225 degrees F. Unit holds seven (7) cartridges. Very good condition.
  20. Filter, Cartridge, S/st, 10" X 32", Meeco, 150 PSI,

    Filter, Cartridge, S/st, 10" x 36", Cuno, Mdl 12DC3,

    Stock Number: C737788

    Cartridge Filter, Manufactured by Cuno, Model 12DC3, Measures 10" diameter x 36" high, Stainless Steel, rated for 150 PSI @ 250 degrees Fahrenheit. Cat #44078-01. New in 2001.
  21. Filter, Cartridge, S/st, 10" x 36", Cuno, Mdl 12DC3,

    Filter, Cartridge, S/st, 12" X 37", Optimum Filter, 125 PSI, (2)

    Stock Number: S740078

    (2) Optimum Filter stainless steel cartridge filter, 316L stainless steel construction, model number 1HP-12TB-3-7-3F-1/2TC-E-EF, serial number 0071352. Chamber measures 12" diameter X 37" straight side with 3" inlet/outlet. Rated for 125 PSI @ 200 degrees F. Unit holds twelve (12) cartridges. Very good condition.
  22. Filter, Cartridge, S/st, 12" X 37", Optimum Filter, 125 PSI, (2)

    Filter, Cartridge, S/st, 12" X 41", 150 PSI,

    Stock Number: S740084

    Stainless steel cartridge filter, model number T911488-432, type ZHFF11230 432, serial number FK. Chamber measures 12" diameter X 41" straight side with 3" inlet/outlet and clamped lid. Rated for 150 PSI @ 200 degrees F. Unit holds twelve (12) cartridges. Very good condition.
  23. Filter, Cartridge, S/st, 12" X 41", 150 PSI,

    Filter, Cartridge, S/st, 3.5" X 12", Meeco, 250 PSI,

    Stock Number: S740083

    Stainless steel catridge filter, manufactured by Meeco, part number SN2A17CFFOHNIS, serial number 6637. Chamber measures 3-1/2" diameter X 12" straight wide with 1-1/2" inlet/outlet. Liquid pressure rating of 250 PSI, 125 PSI gas pressure rating. Very good condition.
  24. Filter, Cartridge, S/st, 3.5" X 12", Meeco, 250 PSI,

    Filter, Cartridge, S/st, 4 SF, (3),

    Stock Number: C371990

    Pall cartridge filter, Model MCY100 LEC rated 150 PSI design pressure. Stainless steel contacts. 2" inlet & outlet flanges. 1976. Serial number 28707,28714 & 28715. 5" diameter x 30" long shell. Estimate 4 sq.ft. filtering area.
  25. Filter, Cartridge, S/st, 4 SF, (3),

    Filter, Cartridge, S/st, 4" X 32", Optimum Filter, 125 PSI,

    Stock Number: S740082

    Optimum Filter cartridge filter, 316L stainless steel construction, model # CAN-1IN-3-7-45TC-V-EF, serial # 0071279. Chamber measures 4" diameter X 32" straight side with 3" inlet/outlet. Rated for 125 PSI @ 200 deg F. Unit holds one (1) cartridge. Very good condition.
  26. Filter, Cartridge, S/st, 4" X 32", Optimum Filter, 125 PSI,

    Filter, Cartridge, S/st, 6" x 36", Dual Skid, Flomax Pump,

    Stock Number: C741281

    Dual cartridge skid, includes (2) 6" diameter X approximately 36" high, manufactured by Eaton, rated for 150 psi at 250 degrees Fahrenheit. Includes Flomax 15 self priming centrifugal pump, 3" diameter in & out, driven by 5 Hp, 208-230/460V motor, (Coker pump), serial number 12-0030669. Very good condition.
  27. Filter, Cartridge, S/st, 6" x 36", Dual Skid, Flomax Pump,

    Filter, Cartridge, S/st, 6" x 36", Dual Skid, Fristam Pump,

    Stock Number: C741282

    Filter skid, manufactured by Shelco "MicroGuardian", model for FOS 2-SB-2F-ML-V 2-C-CF02, serial number 141265, cartridge type MS 20, rated for 150 psi, stainless steel, 2" diameter in & 2-1/2" diameter out. Also includes vertical stainless steel condenser, shell measures 6" diameter X 36" straight side. Also includes centrifugal pump, manufactured by Fristam, model FPR742 175, serial number FPR 742-120-5091, two at 2 1/2" diameter in & 2" diameter out, leads to cartridge filters.
  28. Filter, Cartridge, S/st, 6" x 36", Dual Skid, Fristam Pump,

    Filter, Cartridge, S/st, 6-1/2" x 30", Millipore, (3)

    Stock Number: S740155

    (3) Millipore F3MTB1-3 stainless steel cartridge filter housing 4 tube design, 6-1/2" dia x 30" long with 2" sanitary flanged inlet/outlet.
  29. Filter, Cartridge, S/st, 6-1/2" x 30", Millipore, (3)

    Filter, Cartridge, S/st, 8" x 30", Basket Filter,

    Stock Number: S740180

    Bag filter, measures 8" diameter X 30" high, 316 stainless steel construction, 3" flange in (top)/ out (bottom). Trade Size # 2 Housing. Complete with Stainless Steel Strainer Basket and Internal Bag Support Rack, Mounting Stand, etc. Good condition. Previously used at food processing facility.
  30. Filter, Cartridge, S/st, 8" x 30", Basket Filter,

    Filter, Cartridge, S/st, 9" x 25", Parmatic, Cannister

    Stock Number: S371998

    Cartridge filter, stainless steel, 9" x 25", manufactured by Parmatic Filter Corp. Unit is cannister only. Filter has 4" in/out, rated for 80 PSI. Filter PO# 690090, Serial number 070. Sanitary design, last used in pharmaceutical operation.
  31. Filter, Cartridge, S/st, 9" x 25", Parmatic, Cannister

    Filter, Cartridge, S/st, 9" X 48", 150 PSI, (2)

    Stock Number: S740385

    (2) Stainless steel cartridge filter, manufactured by Filterite, model number 910598-000. Unit has two (2) chambers unitized on one platform, each chamber measures: 9" diameter X 48" tall; each chamber holds seven (7) cartridges measuring 1" diameter for a total of fourteen (14) cartridges. Serial number LV. Previously used in an research and development facility.
  32. Filter, Cartridge, S/st, 9" X 48", 150 PSI, (2)

    Filter, Cartridge, S/st, Dollinger, 150 PSI, (2),

    Stock Number: C372001

    (2) Dollinger cartridge filter, Model LL-211-280, stainless steel product contact parts rated at 150 PSI. Unit is complete with 3" flanged inlet/outlet, utilizing element #84-231-21, 11" diameter x 51" l filter housing with bolt on top. Unit designed to accommodate 7 filter cartridges, 2-1/2" diameter x 4' l. Unit is bottom feed, bottom discharge. Unit bears serial number 33933.
  33. Filter, Cartridge, S/st, Dollinger, 150 PSI, (2),

    Filter, Cartridge, S/st, Filterite, 150 PSI.

    Stock Number: S372003

    Filterite cartridge filter, model 902061-1 stainless steel contact parts, rated 150 PSI @ 250 deg. F. Unit is stainless steel shell with approx. 36 cartridges, 3" diameter x 2' long. Cartridges are top removable. Unit has 4" diameter flanged inlet, 4" diameter center bottom discharge. Cartridges are spring loaded design, filter is in excellent condition.
  34. Filter, Cartridge, S/st, Filterite, 150 PSI.

    Filter, Cartridge, S/st, Filterite, Mdl 9104440-000, 150 PSI, (2)

    Stock Number: S739963

    (2) Filterite stainless steel cartridge filter, model 9104440- 000, type 12FM02A-2, rated 150 PSIG @ 200 deg F, has 2" inlet and outlet. Filter measures 8.5" diameter x 22" deep and hold (6) 18" long cartridges. Unit is mounted on stand, serial number S27432 EZ.
  35. Filter, Cartridge, S/st, Filterite, Mdl 9104440-000, 150 PSI, (2)

    Filter, Cartridge, S/st, Filterite, Oil System,

    Stock Number: S735438

    Oil filter system, includes (2) Filterite cartridge filters, 8" diameter x 16" high, stainless steel contruction, model 910800-000, type 7MEGA+1-SF, rated for 150 PSI @ 200 degrees Fahrenheit, 2" in/out Filterite Serial numbers FS and ES. Also includes stainless steel tank, 125 gallon, 30" diameter x 40" deep, with cover, 2" diameter side bottom discharge with manual valve. Complete with Crepaco size R3R positive displacement pump, 1-1/2" in and out, stainless steel contacts, driven by 3/4 HP, 230/460, 3/60Hz, 1540RPM motor, Serial number B-6931. Includes WFCAC inverter box for pump. Appears to be in very good condition.
  36. Filter, Cartridge, S/st, Filterite, Oil System,

    Filter, Conditioner, Water, Softener, Boss, Mdl 900

    Stock Number: S738651

    Water-Boss water softener, model 900, large capacity water treatment appliance, softens up to 90 grains per gallon while reducing up to 10 parts per million (PPM) of ferrous iron, and filter dirt and sediment.
  37. Filter, Conditioner, Water, Softener, Boss, Mdl 900

    Filter, Conditioner, Water, Softener, Kinetico,

    Stock Number: S738301

    Water conditioning system, manufactured by Kinetico, model HS118S0D, Multi-Plex softener. Unit is rated for 35 PSI minimum and 125 PSI maximum. Includes polyethylene-lined softener tank, measuring 18" diameter x 65" tall. Unit also includes a counter-current pump for brine/rinse, backwash and purging. Includes brine tank, measuring 20" diameter x 53" tall. New in 2011, serial # 00737335. Very good condition.
  38. Filter, Conditioner, Water, Softener, Kinetico,

    Filter, Holder, Millipore, S/st, 125 PSI, 293mm,

    Stock Number: S739704

    Millipore Corp 293 mm filter holder stainless steel. Unit has max 125 PSI inlet; 100 PSI differential, filter diameter is 293mm, prefilter diameter is 257mm, on (3) 10" legs.
  39. Filter, Holder, Millipore, S/st, 125 PSI, 293mm,

    Filter, Holder, Millipore, S/st, 400 PSI, (3)

    Stock Number: S739703

    (3) Millipore Corp 90 mm stainless steel filter hold with 400 PSI inlet; 100 PSI differential, inlet filter dia is 90mm, prefilter dia of 75mm.
  40. Filter, Holder, Millipore, S/st, 400 PSI, (3)

    Filter, Housing, 316 S/st, 10" x 20", (3)

    Stock Number: S739848

    (3) 316 stainless steel filter housing, measurings 10" diameter x 20" straight side with 2" side port and clamp on lid.
  41. Filter, Housing, 316 S/st, 10" x 20", (3)

    Filter, Housing, Aqua Pure SS12, S/st, 2", 150 PSI (5)

    Stock Number: S740067

    (5) Aqua-Pure SS12 Filter Housing, Stainless Steel, v-band clamp,2" npt inlet & outlet, 150 PSI, 96 GPm. Unit takes (4) cartridges 2-1/2" diameter x 30" tall.
  42. Filter, Housing, Aqua Pure SS12, S/st, 2", 150 PSI (5)

    Filter, Housing, Aqua Pure SS8, S/st, 2", 150 PSI, 1/2 HP

    Stock Number: S740068

    Aqua-Pure SS8 Filter Housing, stainless steel v-band clamp, 2" npt inlet & outlet, 150 PSI 64 GPM with ARO Ingersol Rand 1/2" diaphragm pump. Unit includes Eemax 3.0 Kw 120V electric single point of use tank-less water heater, portable.
  43. Filter, Housing, Aqua Pure SS8, S/st, 2", 150 PSI, 1/2 HP

    Filter, Housing, S/st, 3-7/8" dia X 7", 1-1/4" in/out, (2)

    Stock Number: S740154

    (2) Sartorius F203AS sanitary stainless steel filter housing measuring 3-7/8" diameter x 7" long with 1-1/4" inlet and outlet. One unit rated for 150 PSI @ 250 degrees F, other unit rated for 150 PSI @ 300 degrees F.
  44. Filter, Housing, S/st, 3-7/8" dia X 7", 1-1/4" in/out, (2)

    Filter, Housing, S/st, Millipore, 5" x 12"

    Stock Number: S740765

    Millipore filter housing, stainless steel, 150 psi @ 250 deg F, 5" dia x 12" straight side, with stainless steel clamp and 1" inlet / outlet.
  45. Filter, Housing, S/st, Millipore, 5" x 12"

    Filter, P&F, 10", S/st, Sartorius, Ultrafiltration,

    Stock Number: S736200

    Sartorius plate & frame filter, 10" diameter frames, 1" thick, all stainless steel contacts. Frames include (10) openings to feed products thru plates, set up to accommodate 7" high filters, PO# SY98-SF30-01, serial number 18050. Includes manually operated pneumatic cylinder for plate closure. Good condition.
  46. Filter, P&F, 10", S/st, Sartorius, Ultrafiltration,

    Filter, P&F, 12" Dia., Brass, Ertel,

    Stock Number: Z377150

    Filter press, 12" diameter, brass construction, manufactured by Ertel. Unit has five plates, 5/16" thick and 2 frames, 1" thick. Filter has two-eye delivery, screw closure, mounted on base with casters.
  47. Filter, P&F, 12" Dia., Brass, Ertel,

    Filter, P&F, 15" x 15", 316 S/st, Horm Filters

    Stock Number: S738210

    Filter, plate and frame, manufactured by Horm Filters. Unit is 316 stainless steel, portable, 1" inlet, 1/2" outlet. Unit has 26 plates measuring 15" x 15" x 1/2" thick. No nameplate data available.
  48. Filter, P&F, 15" x 15", 316 S/st, Horm Filters

    Filter, P&F, 16" x 16", S/st, HK, Wine Filter,

    Stock Number: C739113

    HK pad filter, complete with (29) 16" x 16" stainless steel, perforated plates, 2-eye closed delivery, with divider block. Includes pressure gauge at feed end. Previously used at wine processing facility.
  49. Filter, P&F, 16" x 16", S/st, HK, Wine Filter,

    Filter, P&F, 18" X 18", CI, Skeleton, Sperry,

    Stock Number: Z376587

    Filter, plate & frame, 18" x 18", c/s, Sperry, frame only, 4-eye closed delivery, manual close, serial number 64314 type 47.
  50. Filter, P&F, 18" X 18", CI, Skeleton, Sperry,

    Filter, P&F, 18" X 18", PPL, 20 Plates, Star Systems, 8 CF,

    Stock Number: S740383

    Plate and Frame Filter Press, manufactured by Star Systems. Unit has (18) 18" x 18" polypropylene plates, 2" thick, 1/8" recess. Approximately 8 Cu. Ft. cake capacity. Star Systems Model number LCRC 18470QCGADP ED, Serial number H96028. Unit has gasket recessed plates with center feed. Set up 2" diameter center feed, 4-eye closed delivery with 1" diameter corner openings. Chamber measures 64" long x 19-1/2" wide. Includes hydraulic hand actuator. Previously used in research and development facility.
  51. Filter, P&F, 18" X 18", PPL, 20 Plates, Star Systems, 8 CF,

    Filter, P&F, 18' X 18", PPL, 3 Plates, Shriver

    Stock Number: C735820

    Filter press, Shriver/Eimco, recessed plate, 18" wide plates, polypropylene plates with approx 1/2" recess, includes (3) plates with one having dual sided recess, Model # M470FB serial # 41962-01-AR rated for max filtering pressure of 225 PSI, max thrust 39 tons max oil pressure 4000 PSI customer po # CT 92211. Capable of additional plates. Set up for hydraulic closure, 4-eye closed delivery with Graco pump. Includes spare unused baker process hydraulic pumping unit, item # smoo6b35a includes teledyne fluid systems pumping unit, Model # s216j60, part # 77895-11, serial # 2946, rated for outlet pressure 6100 PSI, max drive pressure 100 PSI, new in 1997, unused excellent condition. Includes automatic valves, filters, piping, etc.
  52. Filter, P&F, 18' X 18", PPL, 3 Plates, Shriver

    Filter, P&F, 24" X 24", CI, 17 Plates, SHRiver,

    Stock Number: Z375795

    Filter, plate & frame, 24" x 24", Shriver, carbon steel, 17 plates 18 frames, 4-eye delivery, manual closing,.
  53. Filter, P&F, 24" X 24", CI, 17 Plates, SHRiver,

    Filter, P&F, 24" x 24", S/st, 36 Plates, 264 SF,

    Stock Number: C738243

    Plate & frame filter press, stainless steel plates, manufactured by John C Carlson Ltd. Unit is 264 sq.ft. surface area, with 6 cu.ft. cake capacity. Has 36 plates measuring 23" x 24" x 1/2" thick with 40 frames, on 1/2" frame. Excellent condition.
  54. Filter, P&F, 24" x 24", S/st, 36 Plates, 264 SF,

    Filter, P&F, 24" X 24", S/st, Sperry,

    Stock Number: Z375855

    Filter, plate & frame, Sperry, 24" x 24", 304 stainless steel, 9-1" thick plates and 10-1" thick frames, 2-eye closed delivery ratchet, hydraulic closure, on stand, 75 sq.ft. of filter area, 3 cu.ft. of cake capacity. Serial number 96085, type 41.
  55. Filter, P&F, 24" X 24", S/st, Sperry,

    Filter, P&F, 30" X 30", PPL, Ontrac, 28 Plates, Recessed,

    Stock Number: S732960

    Plate & frame filter press, rated for approximately 175 sq. ft. of surface area, approximately 7 cu. ft. of cake capacity, complete with (28) 30" x 30" x 2-1/2" thick polypropylene plates, 1/4" recess, manufactured by Ontrac, with 4 eye closed delivery and complete with hydraulic closure.
  56. Filter, P&F, 30" X 30", PPL, Ontrac, 28 Plates, Recessed,

    Filter, P&F, 31.5" X 31.5", PPL, 26 Chamber, Hoesch,

    Stock Number: S375610

    Hoesch recessed plate filter, 31-1/2", with (26) 2" polypropylene recessed plates, center fed, four-eye closed delivery, automatic plate shifting, dual ram automatic hydraulic closing mechanism, and is in good condition. Plates have 3/8" recess approx total cake capacity 8 cu ft.
  57. Filter, P&F, 31.5" X 31.5", PPL, 26 Chamber, Hoesch,

    Filter, P&F, 31.5" X 31.5", PPL, 300 SF, 5 CF cake, JWI

    Stock Number: S740568

    Plate and Frame Filter press, manufactured by JWI, model # 800G32-20-10DA. Unit has twenty-one (21) 800 mm plates (31.5" X 31.5") with ?" deep recesses. Approximately 300 SF of surface area and 5 cu. ft. of cake capacity. Unit has a filtration pressure rating of 100 PSI and a hydraulic closing pressure of 3300 PSI. Filter has a 2" diameter center feed and a 1-1/2" diameter, 4-eye closed delivery. Includes two (2) mild steel collection bins with forklift slots. Press is in good condition.
  58. Filter, P&F, 31.5" X 31.5", PPL, 300 SF, 5 CF cake, JWI

    Filter, P&F, 31.5" X 31.5", PPL, Met-Chem, 8 CF

    Stock Number: S740656

    Plate and frame filter press, manufactured by Met-Chem, Inc. 8 cubic feet cake, 18 pleates measure 31.5" X 31.5" X 2.25" thick. On mild steel stand, ground clearance of 66.50 inches.
  59. Filter, P&F, 31.5" X 31.5", PPL, Met-Chem, 8 CF

    Filter, P&F, 32" X 32", PPL, Sperry, 639 SF, 16 CF,

    Stock Number: S739455

    Sperry plate & frame filter press, Size 800mm, type AHOP, 100 PSI max pressure. Rated for approximately 650 sq. ft. surface area and 16 cu. ft. of cake capacity. Set up with 3-1/2" diameter center feed, (4) 2-1/2" diameter closed delivery corner ports and PVC piping. Filter complete with (2) Head Plate and approximately (60) 32" x 32" polypropylene CGR plates with 1/4" recess and AHOP power unit with pressure gauges. Also includes chain driven plate shifter, hydraulic ram for plate closure, Dayton blower for pneumatic blow back and (2) underneath collection bins with forklift slots. Previously used at food processing facility. Serial# X60907. Very good condition.
  60. Filter, P&F, 32" X 32", PPL, Sperry, 639 SF, 16 CF,

    Filter, P&F, 33" X 31.5", PPL, 36 Plates, Pump

    Stock Number: S738643

    Plate and frame filer. Unit has 36 polypropylene plates, 33" x 31-1/2" x 2" thick, includes air driven liquid pump model 5L-SS-45-X-N, serial number 1106028. 1/2" inlet/outlet, with 8 extra plates available. No nameplate data available.
  61. Filter, P&F, 33" X 31.5", PPL, 36 Plates, Pump

    Filter, P&F, 36" x 36", C/st, Womach, Vert, 54 SF, 4.5CF

    Stock Number: C730341

    Filter, plate & frame, vertical tower, 36" x 36", Womach, carbon steel contact parts with 6 recessed plates. Unit is vertical tower designed for replaceable paper assemblies. Unit has approx 54 sq.ft. surface area rated for 4.5 cu.ft. of cake capacity operating at 250-300 GPM. System is complete with hydraulic power pack with capabilities for pneumatic blow down cake and cake washing.
  62. Filter, P&F, 36" x 36", C/st, Womach, Vert, 54 SF, 4.5CF

    Filter, P&F, 36" X 36", PPL, Durco, (16) Plates, Recessed,

    Stock Number: S736309

    Filter press, manufactured by Durco, model SOE 27587, includes (16) plates, 36" x 36" polypropylene recessed plates, including head & tail plates, 4-eye closed delivery, hydraulic closure. motor is 2 HP, 208-230/460V, 1725 RPM. Tank measures 17" x 15" x 15" high. Overall dimensions: 12'5"Lx 4'8"W x 80"H, 7800#.
  63. Filter, P&F, 36" X 36", PPL, Durco, (16) Plates, Recessed,

    Filter, P&F, 36" X 36", PPL, Valley, 45 P, 46 F, 640 SF,

    Stock Number: S737316

    Valley polypropylene plate and frame filter press, complete with 45 plates and 46 frames. Unit has 640 sq. ft. surface area and 27 cubic foot cake capacity. Unit is complete with hydraulic pump system for closure, less controls.
  64. Filter, P&F, 36" X 36", PPL, Valley, 45 P, 46 F, 640 SF,

    Filter, P&F, 39" X 39", S/st, 49 Plates, 623 SF, Pad Filter

    Stock Number: S740462

    HK Pad Filter, complete with (59) stainless steel perforated plates measuring 39" X 39" for a total surface area of approximately 623 square feet. Unit has two-eye closed delivery with divider block. 10’ overall length. Complete with controls. Machine number FT 80-3, type Getra 1000. New in 1980. Very good condition.
  65. Filter, P&F, 39" X 39", S/st, 49 Plates, 623 SF, Pad Filter

    Filter, P&F, 470mm, PPL, 5 Plates, 2 CF

    Stock Number: S739965

    Lanco plate and frame filter press, polypropylene, with 5 plates measuring 470 mm, 2 cubic feet capacity. Unit has hydro vacuum pump, model D50, 13.70 gpm, 550 rpm. Unit is missing hydralic cylinder and hydraulic pump.
  66. Filter, P&F, 470mm, PPL, 5 Plates, 2 CF

    Filter, P&F, 48" X 48", PPL, 36 Plates, Recessed, (3)

    Stock Number: C730788

    (3) Plate & frame filter press, manufactured by Shriver, 48" x 48" recessed plates, polypropylene construction, approximately (36) plates, 6" diameter center eye feed, hydraulic closure complete with (2) hydraulic pumps, open delivery, approximately 55 cu.ft. Cake capacity each, includes 54" discharge conveyor with repulper. There are (2) morris centrifugal feed pumps (100 HP & 75 HP) for the (4) filters.
  67. Filter, P&F, 48" X 48", PPL, 36 Plates, Recessed, (3)

    Filter, P&F, 48" X 48", PPL, Shriver,

    Stock Number: S374342

    Shriver recessed plate filter press with (20) 48" x 48", 3" thick polypropylene chambers, 5/8" deep recess. 3" diameter corner eyes, 5" diameter center feed. Unit is complete with Vickers hydraulic pump with reservoir for hydraulic closing, automatic plate shifters, less control panel. Press rated approx 640 square feet of filtering area & 30 cubic foot cake capacity.
  68. Filter, P&F, 48" X 48", PPL, Shriver,

    Filter, P&F, 7" x 7", General Electric, C/st, 15 Plates

    Stock Number: S739566

    General Electric plate and frame filter, 7.5 sq/ft surface area. Unit has 15 plates measuring 7" x 7", carbon steel, capacity of 12 gpm. Unit run by 1 HP 1725 rpm drive, pump is rated at 100 psi max. Mounted on portable stands. Serial number M-117009.
  69. Filter, P&F, 7" x 7", General Electric, C/st, 15 Plates

    Filter, P&F, Frame Only, S/st, Schenk, Portable, (2)

    Stock Number: S738246

    (2) Schenk plate & frame filter, stainless steel. Unit is frame only, less plates & frames. Portable.
  70. Filter, P&F, Frame Only, S/st, Schenk, Portable, (2)

    Filter, Pressure Leaf, 1 Sq m, Velo, DE filter,

    Stock Number: A738934

    Velo DE filter, approximately 1 square meter surface area, includes vertical tank with (16) horizontal leaves, stainless steel construction. Good condition.
  71. Filter, Pressure Leaf, 1 Sq m, Velo, DE filter,

    Filter, Pressure Leaf, 100 SF, C/st, Industrial, VTHL,

    Stock Number: C384575

    Industrial pressure leaf filter, 100 sq.ft., carbon steel, no name plate, similiar to Sparkler Model 33-D-17.
  72. Filter, Pressure Leaf, 100 SF, C/st, Industrial, VTHL,

    Filter, Pressure Leaf, 116 SF, C/st, Industrial, VTHL,

    Stock Number: Z384295

    Industrial carbon steel pressure leaf filter, 116 sq.ft., type 116.914, series 36-1.5-28, 60 PSI at 140 deg. F., with 500 gallon carbon steel mix tank, 3 HP 220Volt feed pump, 3 air actuated product valves, complete control panel, vertical tank, horizontal leaf stack. Serial number 2549f18524, new 1981, nat'l board no. 2549, never used.
  73. Filter, Pressure Leaf, 116 SF, C/st, Industrial, VTHL,

    Filter, Pressure Leaf, 120 SF, Jkt, 316L S/st, Schenk, VTHL

    Stock Number: S740473

    Centrifugal Pressure Leaf Filter, manufactured by Schenk, type ZHF-R15/10 KLK. Unit has twenty-three (23) plates measuring 32" diameter for a total cake capacity of approximately 120 square feet. Includes 265 gallon 316L stainless steel vessel rated for full vacuum and 100 PSI @ -4 deg. F. to 300 deg. F. Vessel is jacketed for 100 PSI @ - 4 deg. F. to 300 deg. F. Includes 12" diameter solids drain and 7-1/2" center-bottom liquids drain. Includes 6" diameter sight glass. Vessel number 3624, serial number 2121.
  74. Filter, Pressure Leaf, 120 SF, Jkt, 316L S/st, Schenk, VTHL

    Filter, Pressure Leaf, 160 SF, 316L S/st, Funda, VTHL

    Stock Number: S732256

    Funda pressure leaf filter, 160 sq. ft., with 316L stainless steel wetted parts, rated for 220 PSI @ 320 deg. F. Internal tank measures 4' diameter x 6'3" overall with conical bottom, unit has 30 HP 220/440 volt motor drive thru Falk gearbox with 6.265:1 ratio for 280 RPM. Unit complete with 20 filter disks, mesh less than .013, 1 meter dia, model 15m2 (15 sq/mtr area), no legs. Unit manufactured by Chemap Engineering, Zurich. Serial number 1094-20, tank is us 660 gal, excellent condition, appears unused.
  75. Filter, Pressure Leaf, 160 SF, 316L S/st, Funda, VTHL

    Filter, Pressure Leaf, 18 SF, S/st, Sparkler, VTHL, Jkt,

    Stock Number: S736496

    Pressure leaf filter, approx. 18 sq. ft. surface area, manufactured by Sparkler, model 18-S-11, vertical tank/horizontal leaves, 304 stainless steel contacts, 18" diameter x 18" straight side, carbon steel jacket, jacketed for 14.9 PSI, internally rated for 60 PSI. Bolted top and dished bottom, 1-1/2" center bottom discharge. Mounted on (3) steel pipe legs.
  76. Filter, Pressure Leaf, 18 SF, S/st, Sparkler, VTHL, Jkt,

    Filter, Pressure Leaf, 19 SF, 316 S/st, Sparkler, VTVL,

    Stock Number: Z385907

    Sparkler pressure leaf filter, Model VP-17-12, 19 sq.ft., 316 stainless steel, tank only no leaf bundle, 20" diameter x 16" deep, removable leaf bundle, complete with scavenger plate, 75 PSI max operating pressure. No leaves.
  77. Filter, Pressure Leaf, 19 SF, 316 S/st, Sparkler, VTVL,

    Filter, Pressure Leaf, 19.32 SF, S/st, Sparkler, Mdl 18-D-12,

    Stock Number: S741185

    Sparkler pressure leaf filter, Model 18-D-12, 316 stainless steel contact parts. Rate for 19.32 square feet surface area, 2.38 cubic feet cake capacity. Maximum pressure rated for 60 PSI, and maximum temperature is 650 degrees Fahrenheit. Unit includes (12) 18" diameter shallow plates, shell/head thickness 0.109, built 1954, serial number 9849, National Board Number 22.
  78. Filter, Pressure Leaf, 19.32 SF, S/st, Sparkler, Mdl 18-D-12,

    Filter, Pressure Leaf, 2 Sq m, Spadoni, Mdl DCBl50, S/st,

    Stock Number: S737109

    Spadoni DE filter, pressure leaf filter, Model number DCBL50, 2 square meters surface area, output rated for 22 GPM, 2.35 HP. Vertical tank with horizontal leaves, manual DE discharge system, compact mobile unit mounted on (4) wheels. Previously used for beer filtration. Filter chamber measures 14" diameter x 24" deep, filtrate tank measures 10" diameter x 18" deep, complete with stainless steel centrifugal pump, piping, valves, gauges. Unitized on stainless steel frame with castors, model number DCBL 50, serial number 4682, new in 1994. Appears to be in good condition.
  79. Filter, Pressure Leaf, 2 Sq m, Spadoni, Mdl DCBl50, S/st,

    Filter, Pressure Leaf, 20 SF, C/st, Sparkler, HTVL,

    Stock Number: Z385905

    Sparkler pressure leaf filter, Model RSC20, 20 sq.ft., horizontal tank with vertical leaves, 20" diameter X 29" long, with trough bottom & screw conveyor, heresite lined tank with plastic or hard rubber screen, 5 vertical leaves, with T430 stainless steel perforated plates.
  80. Filter, Pressure Leaf, 20 SF, C/st, Sparkler, HTVL,

    Filter, Pressure Leaf, 20 Sq m, Velo, Mdl FV20VA

    Stock Number: A740646

    Velo Acciai DE filter, model number FV20VA. Unit has a filter area of 20 square meters with stainless steel contacts. Includes vertical stainless steel mesh screens. Previously used in brewery operation. New in 2014. Excellent condition.
  81. Filter, Pressure Leaf, 20 Sq m, Velo, Mdl FV20VA

    Filter, Pressure Leaf, 30 SF, S/st, Comm'l Filters, VTVL,

    Stock Number: S385500

    Commercial Filters pressure leaf filter, Fulflo, model SB31-3FK1. 18" diameter x 24" high vertical carbon steel tank rated 150 PSI @ 500 deg. F. With (3) stainless steel baskets measuring 7-1/2" diameter x 12" deep with 1/8" perforations. Serial number 9201-0076-12196.
  82. Filter, Pressure Leaf, 30 SF, S/st, Comm'l Filters, VTVL,

    Filter, Pressure Leaf, 30 SF, S/st, Velo, Mdl 0056, VTVL

    Stock Number: S739987

    Velo DE filter, previously used on wine. Approximately 3 sq. mt., stainless steel pressure leaf filter, model 0056. Unit has 1.50 kw 3 phase 60 hz Lowara pump, (1) 1" bottom outlet; (2) 8" x 31" screens; (2) 11-1/2" x 31" screens; (2) 14" x 31" screen. Serial number B43.
  83. Filter, Pressure Leaf, 30 SF, S/st, Velo, Mdl 0056, VTVL

    Filter, Pressure Leaf, 300 SF, 316 S/st, Hercules, HTVL,

    Stock Number: Z380800

    Hercules pressure leaf filter, Model 300, 300 sq.ft., 316 stainless steel, rated 100 PSI at 200 deg. F., ASME, complete with roto-lock door, 36" diameter Leaf x 20 leaves, rated at 23 cu.ft. cake capacity. Filter has 1/2 HP, 220/440V gearhead drive for sluicing.
  84. Filter, Pressure Leaf, 300 SF, 316 S/st, Hercules, HTVL,

    Filter, Pressure Leaf, 300 SF, C/st, Gen'l F&E, HTVL,

    Stock Number: Z380820

    General Filtration & Engineering pressure leaf filter, Model HR-300-43, 300 square feet, carbon steel, rated at 60 PSI at 200 deg. F., complete with roto-lock door, 36" diameter leaf x 20 leaves, rated at 23 cubic feet cake capacity. Filter has 1/2 HP, 220/440V gearhead drive for sluicing.
  85. Filter, Pressure Leaf, 300 SF, C/st, Gen'l F&E, HTVL,

    Filter, Pressure Leaf, 300 SF, S/st, Toronto Copper, HTVL,

    Stock Number: Z380750

    Toronto Coppersmiths pressure leaf filter, 300 sq.ft., 316 stainless steel, horizontal tank, vertical leaves, rated at 110 PSI at 200 deg. F., Underwriters code stamp, manufactured in Canada, complete with cam-lock quick opening door, 48" diameter leaf, qty 12, unit complete with 1/2 HP gear head drive for sluicing. Crn # 5667.3. Serial number 3527.
  86. Filter, Pressure Leaf, 300 SF, S/st, Toronto Copper, HTVL,

    Filter, Pressure Leaf, 33 SF, S/st, Sparkler, Mdl 33S11

    Stock Number: A739739

    Sparkler Model 33S11 Pressure leaf filter, vertical tank with horizontal leaves. Includes 304 stainless steel tank and leaves. Rated for 100 PSI @ 350 deg. F. Previously used at fruit juice processing facility.
  87. Filter, Pressure Leaf, 33 SF, S/st, Sparkler, Mdl 33S11

    Filter, Pressure Leaf, 330 SF, S/st, 75 PSI, Coppersmith,

    Stock Number: S737134

    Pressure leaf filter, approx. 330 sq. ft. surface area, horizontal tank, vertical leaves, stainless steel construction, manufactured by Toronto Coppersmith Ltd. , ID# 5. 301,666, Serial number 4761, CRN - E6436. 1, ASME code, UW12C. Complete with (22) 30" x 36" stainless steel leaves, 3-1/2" spacing between leaves. Includes hydraullically operated door with locking mechanism and associated hydraulic power pack. Complete with small hydraulic drive to expose leaves outside of vessel. Appears to be in good condition.
  88. Filter, Pressure Leaf, 330 SF, S/st, 75 PSI, Coppersmith,

    Filter, Pressure Leaf, 4.5 Sq m, Velo, VTHL, DE Filter,

    Stock Number: C740297

    Velo DE Filter, type FOR. 4.5, 4.5 square meter, serial number 0057 OR 70, vertical tank with horizontal leaves. Includes precoat mix tank, measuring 12" diameter X 20" deep. Filter vessel measures 18" diameter X 32" deep. Also include small cartridge filter and centrifugal pump with 1.5" in/out. Last in use approximately 3 years ago. Good condition.
  89. Filter, Pressure Leaf, 4.5 Sq m, Velo, VTHL, DE Filter,

    Filter, Pressure Leaf, 400 SF, S/st, US Filter, HTVL,

    Stock Number: A739013

    U.S. Filter 400 sq. ft. pressure leaf filter, model 400, rated for 50 PSI @ 200 deg. F. Filter is horizontal tank with vertical leaves, stainless steel contacts. Includes spider lock door. Previously used in juice operation.
  90. Filter, Pressure Leaf, 400 SF, S/st, US Filter, HTVL,

    Filter, Pressure Leaf, 5 Sq m, S/st, Della Toffola, DE

    Stock Number: S738765

    Della Toffola 5 square meter DE filter, stainless steel construction, automatically discharged filter. Includes 24" diameter x 40" high vertical tank with rotating horizontal leaves, precoat mix tank, Tecnicapompe sanitary centrifugal pump and controls. Pump is Tecnicapompe model ZCP100L, 2" diameter inlet/outlet, driven by 7.5 kW motor. Filter is offered complete with drives for mix tank, rotating leaves and pump. All unitized on common stainless steel frame with caster. Previously used at wine processing facility. Good condition.
  91. Filter, Pressure Leaf, 5 Sq m, S/st, Della Toffola, DE

    Filter, Pressure Leaf, 50 SF, 304 S/st, Sparkler, VTHL

    Stock Number: S733896

    Sparkler pressure leaf filter, 50 square feet surface area. Unit is model 33-D-9, complete with scavenger plate but missing the 9 horizontal deep plates, 33" diameter filter chamber is 304 stainless contact parts, vertical tank designed for horizontal leaf/plate bundle, complete with clamp-on swing away top lid. Filter is rated at 60 PSI @ 350 deg. F., Serial number 20892, manufactured new 1977, Nationa Board number 1511. Unit could be used as vertical retort or autoclave with direct steam inlet.
  92. Filter, Pressure Leaf, 50 SF, 304 S/st, Sparkler, VTHL

    Filter, Pressure Leaf, 50 SF, C/st, Sparkler

    Stock Number: S737090

    Sparker pressure leaf filter, 50 sq. ft. capacity. Unit is stainless steel, has (12) leaves @ 30" diameter.
  93. Filter, Pressure Leaf, 50 SF, C/st, Sparkler

    Filter, Pressure Leaf, 6.44 SF, S/st, Sparkler, Mdl 18-D-4,

    Stock Number: S741184

    Sparkler pressure filter Model 18-D-4, 304 stainless steel contacts. Rated for 6.44 square feet surface area, 0.776 cubic fee cake capacity. Unit rated for 60 PSI @ 400 degrees Fahrenheit. Includes (4) 18" diameter shallow plates, shell thickness 0.109, head thickness 0.109. Serial number 14509, National Board Number 454.
  94. Filter, Pressure Leaf, 6.44 SF, S/st, Sparkler, Mdl 18-D-4,

    Filter, Pressure Leaf, 7.5 Sq m, Velo, DE Filter,

    Stock Number: A740927

    Velo 7.5 meter Vertical Leaf Velo DE Filter, up gradable to 10 meter. We have maintenance, CIP, and operating SOPs, almost a complete set of spare gaskets, all original manuals. The electric motor had new bearings pressed in about 12 months ago. Runs beer from 30-50 bbls per hour. In production until 3/1/17 and is ready to go. It is set for 240v 3 phase. Has the optional Residue Filter that piggybacks off the Dosing tank. Manual lists Wine 115 HL/Hr, Must 75, Beer 50, Wort 75, Vinegar 75, Fruit Juice 75, oil 30 optimal flow rates. Manufacture date is 2005.
  95. Filter, Pressure Leaf, 7.5 Sq m, Velo, DE Filter,

    Filter, Pressure Leaf, Della Tofalla, HTVL

    Stock Number: A735873

    Della Tofalla filter horizontal retractable tank, vertical leave, approx 2' x 12'.
  96. Filter, Pressure Leaf, Della Tofalla, HTVL

    Filter, Reverse Osmosis, EWT, Mdl DP1500, S/st

    Stock Number: S739232

    EWT reverse osmosis system, model DP1500, double pass. Unit has (4) membranes 4" dia x 44" long, (2) pumps 1 hp 115/230/460 volt, 1750 rpm each. Unit mfg new 7/89, serial number 8990001, has 41,084 hours use.
  97. Filter, Reverse Osmosis, EWT, Mdl DP1500, S/st

    Filter, Reverse Osmosis, Ionics, Nanofiltration, 185 GPM, (3)

    Stock Number: C738973

    (3) Ionics nanofiltration two-stage reverse osmosis system, rated for 185 GPM at 70% recovery of 3,000 TDS influent. Set up to accommodate 8" diameter X 20' long membranes in 9X5 pattern, making up both stages. Includes Foxboro sample stations, pressure & flow transmitters and totalizers. System offered with Fulflo 30" diameter, type 6LMP52-3-6FKI, cartridge filters; Amiad self cleaning filters; Siemens Robicon variable frequency drives.
  98. Filter, Reverse Osmosis, Ionics, Nanofiltration, 185 GPM, (3)

    Filter, Reverse Osmosis, Ionics, Nanofiltration, 300 GPM, (4)

    Stock Number: C738975

    (4) Ionics nanofiltration two-stage reverse osmosis system, rated for 300 GPM at 70% recovery of 3,000 TDS influent. Set up to accommodate 8" diameter X 20' long membranes in 12X6 pattern, making up both stages. Includes Foxboro sample stations, pressure & flow transmitters and totalizers. System offered with Fulflo 40" diameter, type 6LMP52-3-6FKI, cartridge filters; Amiad self cleaning filters; Siemens Robicon variable frequency drives.
  99. Filter, Reverse Osmosis, Ionics, Nanofiltration, 300 GPM, (4)

    Filter, Reverse Osmosis, MSS, S/st, 25 - 35 GPM, 8" Dia.,

    Stock Number: C741284

    Reverse osmosis filter skid, manufactured by MSS, rated between 25 to 35 GPM. Complete with (8) 8" diameter stainless steel reverse osmosis membrane housings. Skid mounted, Includes various pumps - Fedco pump, model MS B-152, serial number 49, 3560 RPM, 158° S, 500 psi, stainless steel contacts, 3" diameter in/out, 30 HP 230/460V motor; Fedco pump, driven by 75 HP motor, MS series in pump, 3" diameter in, 4" diameter out; RS Corcoran company pump with 3" diameter in, 2 1/2" diameter out, driven by 10 HP, 230/460V, 1770 RPM, 3/60 Hz motor; Fristam pump, 15 HP, model FM312 CC – 155, serial number FM312 mL 120-5093, 2" diameter in/out. Also includes (3) shell & tube heat exchangers. Offered with Allen Bradley, Panel View+ 1250, touch screen controls. All unitized on stainless steel skid. Previously used in waste water treatment application for beverages. Very good condition.
  100. Filter, Reverse Osmosis, MSS, S/st, 25 - 35 GPM, 8" Dia.,

    Filter, Reverse Osmosis, Nanofiltration, 24 Tubes, 670 SF (2)

    Stock Number: C737185

    (2) Nanofiltration systems, Koch Membrane manufacturer, (24) modules in parallel, 670 sq.ft. active membrane surface area. System includes: booster pump, 75 HP, 96 GPM @ 440 PSI; 50 gallon permeate collecting tank; 160 gallon rinse tank; controls, valves, instrumentation, switch gear. Tubes piping and valves all 316 stainless steel. Model number SELRO M790, serial numbers KM905599/2239, new 2001, /2328 new in 2004. Last used to desalt dyes. Can be used as R.O. or ultrafiltration with change of membranes. All skid mounted on stainless steel frame. Cleaned and in excellent condition.

Items 1 to 100 of 130 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

Please wait...