+1-415-467-3400

Filler


Items 1 to 100 of 128 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. Filler, Bag, S/st, Sugiyasu Corp., Open Mouth, Elec Weigh

    Stock Number: S740427

    Gross weight bagging machine for open mouth bags with CB900P digital electronic weighing, feeder inlet is 11-1/2" X 12", mouth size 10" x 7-1/2". Unit is driven by pneumatic cylinder for fast loading and vibrating tray for fine loading. Bottom discharge size of 11" x 8". Manufactured by Sugiyasu Corporation (Japan), Bishamon model X25, Max Cap. 250 Kgs (550 lbs), serial number #9910228, date: 99/10.
  2.  Filler, Bag, S/st, Sugiyasu Corp., Open Mouth, Elec Weigh

    Depositor, Hinds Bock, 8 Head, Conveyor, Model 8P-08A

    Stock Number: S737278

    Hinds-Bock filler/depositor, model 8P-08A, eight head with 1-3/8" diameter pistons and max 5" stroke. Unit includes hopper measuring 28" x 44", has conveyor 74" long x 28" wide with rubber belt. Unit has 1/2 HP, 90V motor. Unit is eight head filler, stainless steel. Serial number 1480.
  3. Depositor, Hinds Bock, 8 Head, Conveyor, Model 8P-08A

    Filler, Aseptic, Liqui-Box, Star Asept 1307, 100 GPM, (2)

    Stock Number: C739209

    (2) Liqui-Box Star Asept 1307AB Aseptic Filling System, previously filling juices into 55 gallon drums and 250 gallon totes. All stainless steel construction and all surfaces are CIP cleanable. Star Asept is capable of filling 6 gallons - 370 gallons. Rated for up to 100 gallons/minute depending on product, 3 - 14 PSI depending on product viscosity. Complete with stainless steel powered roller conveyors with load cells. Product is pumped from processing line and enters machine through a single filling valve, terminating at sterile chamber. Fill chamber is re-sterilized each time a new bag is inserted with steam sterilization. Added water flush capabilities to the filling heads in 2011. Capable of running low acid dairy homogeneous, high acid juice, puree, slurry, fruit puree, concentrates, pulps, soup bases, medical bulk fluids. Complete with controls and in very good condition.
  4. Filler, Aseptic, Liqui-Box, Star Asept 1307, 100 GPM, (2)

    Filler, Auger, All-Fill, 2-Head, 3-1/2", S/st, Powder

    Stock Number: S735008

    Powder filler, manufactured by All-Fill, dual head auger filler, 3-1/2" diameter discharge, 3-3/8" diameter auger, stainless steel contacts, includes stainless steel hopper. Center-to-center distance between fill nozzles is 7". Unitized on common frame with all drives and electricals. Previously used to filler garlic and onion powder. Appears to be in good condition.
  5. Filler, Auger, All-Fill, 2-Head, 3-1/2", S/st, Powder

    Filler, Auger, AMS, Mdl A-100, S/st, Foot Pedal,

    Stock Number: A740733

    Auger Filler, manufactured by AMS, model number A-100. Unit has stainless steel hopper and augers. Previously used to fill coffee gournds and beans (includes tooling for ground coffee and whole coffee beans)/ mounted on mild steel base and includes foot pedal for semi-automatic control (can be automated). Includes main drive, rated for 230V, 3/60Hz. New in 1999. Good condition.
  6. Filler, Auger, AMS, Mdl A-100, S/st, Foot Pedal,

    Filler, Auger, Custom Design, S/st, 2", Powder

    Stock Number: S738318

    Auger filling head only, stainless steel contact parts. Unit has 16" x 10" oval hopper, 19" deep to 1-7/8" auger discharge. Plastic discharge auger hopper and discharge is stainless steel, food grade. Unit complete with drive,. 25 kW, 220/380 volt with gearhead reducer. Unit offered less agitator wand and auger. Last used as ingredient feeders on pouch filling line.
  7. Filler, Auger, Custom Design, S/st, 2", Powder

    Filler, Auger, Custom Design, S/st, 2", Powder, (2)

    Stock Number: S738317

    (2) Auger filling head only, stainless steel contact parts. Unit has 16" x 10" oval hopper, 19" deep to 1-7/8" auger discharge. Include stainless steel powder agitator & plastic discharge auger hopper and discharge is stainless steel, food grade. Unit complete with drive,. 25 kW 220/380 volt with gearhead reducer. Unit is in excellent condition, offered as-is, less stand and controls. Last used as ingredient feeders on pouch filling line.
  8. Filler, Auger, Custom Design, S/st, 2", Powder, (2)

    Filler, Auger, Mateer, Pneumatic Scale, 1-Head, Coffee,

    Stock Number: C740815

    (2) Pneumatic Scale / Mateer Model 3820 Auger Filler, previously used to fill coffee beans and ground coffee. Complete with stainless steel agitated hopper. Fill nozzle is 2.5" diameter, Auger is driven by Servo drive, Agitator is driven by 1/2 HP motor thru Allen Bradley digital controls. Unitized on s/st base with conveyor, measuring 4" wide X 8' long, driven by 1/2 HP motor. Complete with Syntron vibrator with adjustable controls. New in 2008, serial numbers 25087 & 25072. Rated for 3-phase, 230V, 60 Hz. Good condition.
  9. Filler, Auger, Mateer, Pneumatic Scale, 1-Head, Coffee,

    Filler, Auger, Mateer, Pneumatic Scale, 1-Head, Coffee, (2)

    Stock Number: C740864

    (2) Pneumatic Scale / Mateer Model 3820 Auger Filler, previously used to fill coffee beans and ground coffee. Complete with stainless steel agitated hopper. Fill nozzle is 2.5" diameter, Auger is driven by Servo drive, Agitator is driven by 1/2 HP motor thru Allen Bradley digital controls. Unitized on s/st base with conveyor, measuring 4" wide X 8' long, driven by 1/2 HP motor. Complete with Syntron vibrator with adjustable controls. Rated for 3-phase, 230V, 60 Hz. Good condition. Excellent condition.
  10. Filler, Auger, Mateer, Pneumatic Scale, 1-Head, Coffee, (2)

    Filler, Auger, Mateer-Burt, S/st, Mdl 31-A,

    Stock Number: C738275

    Auger filler, manufactured by Mateer-Burt, Model number 31A 9-69, stainless steel contacts, includes 2 cu.ft. stainless steel hopper with internal agitator, complete with 1-1/2 HP electric motor drive @ 365 RPM. All mounted on adjustable height bench stand. Previously used to fill toner. Good condition.
  11. Filler, Auger, Mateer-Burt, S/st, Mdl 31-A,

    Filler, Auger, Mateer-Burt, S/st, Mdl 31-A, Scale,

    Stock Number: C738274

    Auger filler, manufactured by Mateer-Burt, Model number 31A 9-69, stainless steel contacts, includes 2 cu.ft. stainless steel hopper with internal agitator, complete with 1-1/2 HP electric motor drive @ 365 RPM. Also includes Toledo Model 3185 platform scale for accurate filling, controls, all mounted on adjustable height bench stand. Previously used to fill toner. Serial 2702. Good condition.
  12. Filler, Auger, Mateer-Burt, S/st, Mdl 31-A, Scale,

    Filler, Auger, Mateer-Burt, S/st, Mdl 909

    Stock Number: C740411

    Single-head auger filler, manufactured by Mateer-Burt, model number 909, all stainless steel contacts. Includes hopper measuring 21" diameter X 20" deep leading to 1-1/2" discharge. Complete with NB series 9 control box with digital readout and foot actuator. Driven by 1.5 HP, 230/460-Volt, 3/60 Hz, 1140 RPM Baldor motor. Mounted on mild steel frame with casters. Good condition
  13. Filler, Auger, Mateer-Burt, S/st, Mdl 909

    Filler, Auger, Mateer-Burt, Single Head, Mdl 31A, Powder, (2)

    Stock Number: S736707

    (2) Auger filler/powder filler, manufactured by Mateer-Burt, model 31-A, includes stainless steel cone shaped hopper with internal agitator, filling auger, 1-3/4" diameter outlet with 2" diameter spinner plate. Internal agitator is driven by 1 HP, 1200 RPM, 3/60 Hz, 220/440 volt motor. Auger is driven by a 1/2 HP motor thru gear box. Appears to be in good condition. Serial numbers S-1548 12/65 and S1547 12/65. Good condition.
  14. Filler, Auger, Mateer-Burt, Single Head, Mdl 31A, Powder, (2)

    Filler, Auger, P-1, Mdl DP-1, S/st, Single Head

    Stock Number: S739713

    Single head auger filler mfg by P-1, model DP-1. Unit is ideal for dosing quanitites from a few milligrams to 10 grams. Bench mounted auger filler is semi automatic, all stainless steel contact parts, suitable for all powder substances to fine grain form. Serial number 137, mfg new 1995, 220 volt.
  15. Filler, Auger, P-1, Mdl DP-1, S/st, Single Head

    Filler, Bag, 15 Station, S/st

    Stock Number: S736634

    Continuous bag filler with 15 stations, semi automatic. Unit includes feed section with stainless hopper and sealing section. Unit designed for flat bottom rectangular bags. Set up for 3" x 4-1/4" bags, 10" tall. Unit has all stainless contact parts and appears in excellent condition, mounted on stainless cabinet. Manufacturer unknown.
  16. Filler, Bag, 15 Station, S/st

    Filler, Bag, 8 Head, S/st, Eriez, Mdl N4X, 115V

    Stock Number: S738665

    Bag filler, 8 head, manufactured by Eriez, stainless steel dry filler. Model number N4X-8FT-2D/115, style 9910734. Unit is 115 volt, single phase. Previously used at food processing facility.
  17. Filler, Bag, 8 Head, S/st, Eriez, Mdl N4X, 115V

    Filler, Bag, Auger, Stoker, Single, C/st, With Scale,

    Stock Number: C330146

    Bag filling machine, H.L. Stoker Model DX, 2" diameter mild steel auger. Packer includes large RA-5 ribbon-paddle agitated hopper with 7-1/2 HP motor and shaft-mounted reducer, bag rest and settling device, product weighing scale, leveling screws, etc. All mild steel contacts. Serial number W450A.
  18. Filler, Bag, Auger, Stoker, Single, C/st, With Scale,

    Filler, Bag, Bemis, Pneumatic, Metal Detector

    Stock Number: C739325

    Bag Filler, manufactured by Bemis. Filler measures 10" diameter. Includes bag clamps. Unit is pneumatically operated. Includes metal detector, manufactured by Goring Kerr (Graseby). Unit is a drop-through type with 13" X 4" opening. Complete with BemiScan Data Center.
  19. Filler, Bag, Bemis, Pneumatic, Metal Detector

    Filler, Bag, Esp, Open Mouth, Mdl GBAO-31, 115#, C/st

    Stock Number: C330125

    Express scale parts open mouth gross bagging scale, Model GBAO-31. Unit designed to handle 20# to 115# bags, free flowing material at 5-6 bags p/min. Unit is open mouth design for 31" spout circumference, semi-auto with pneumatic actuators. Unit designed for + or - 4 oz accurace on set weight. Unit bears serial number 019032 and is offered as filler only no overhead hopper.
  20. Filler, Bag, Esp, Open Mouth, Mdl GBAO-31, 115#, C/st

    Filler, Bag, Line, Open Mouth, Express Scale

    Stock Number: S730466

    Express Scale bag filling line for open mouth bags. Line includes Express Scale filler model GMDT31E, Serial number 068716, rated for up to 115 lb. capacity, adjustable height conveyor to Eaton check weigher model UML44AABC with conveyor to pnuematic kicker and bag flattener. complete line last run on 50-100 lb bakery mixes. Unit has digital adjustable electronic scale, digital controls on check weigher.
  21. Filler, Bag, Line, Open Mouth, Express Scale

    Filler, Bag, Line, Open Mouth, Howe Richards

    Stock Number: S730464

    Howe Richards bag filling line, open mouth bags. Unit is model G17, 350 lb capacity, driven by 3 HP, 208-230/460V, 1750 RPM, 3-phase drive to torque reducer. Max input speed is 1974 RPM with 14:1 ratio. Serial number 0182-56-073.
  22. Filler, Bag, Line, Open Mouth, Howe Richards

    Filler, Bag, Modular, Mdl MPB/8000, Frac HP,

    Stock Number: S732475

    Yakima Waireworks Inc. modular produce bag filler, model MPB/8000. (1) Serial number 91010055, 115V, 1-phase, (1) Serial number 89100017, fractional HP motor. Unit is microprocessor controlled, designed to handle produce very gently from 1 lb to 50 lb bags, capacity up to 20 bags/min. Unit fills by weight and number of pieces. Unit uses pre-made wicketed bags, solid or mesh.
  23. Filler, Bag, Modular, Mdl MPB/8000, Frac HP,

    Filler, Bag, Open Mouth, 50-Lb., Hopper

    Stock Number: A740308

    Open Mouth Bag Filling System, manufactured by Choice Bagging System. Previously filling 50-pound bags of organic fertilizer. Complete system includes 37-cubic foot self-standing hopper, mezzanine, and all required controls.
  24. Filler, Bag, Open Mouth, 50-Lb., Hopper

    Filler, Bag, Piston, Cleveland, S/st, Tipper Tie Closer

    Stock Number: S739401

    Cleveland model MFS-Y metering filling station with Tipper Tie bag closer. Mounted on stainless steel portable stand with casters. Unit equipped with "Tipper Tie" closure stand with selector switch for single stroke and continuous operation. Air operated positive displacement piston style pump with adjustable speed control and stroke from 20 - 128 oz, air controlled product valve, sink with drain. Serial number SNWT5536-03K01.
  25. Filler, Bag, Piston, Cleveland, S/st, Tipper Tie Closer

    Filler, Bag, Powder, Durant Mdl 200, S/st, Pneumatic

    Stock Number: C732731

    Durant valve bag filler, single spout, pneumatic actuated. Unit is Model 200 with all stainless steel contact parts, complete w/adjustable scale for filling to adjusted bag weight. Unit is mounted on carbon steel frame, in fair condition, last run on plastic pellets.
  26. Filler, Bag, Powder, Durant Mdl 200, S/st, Pneumatic

    Filler, Bag, Rotary, 4 Station, S/st, Vibratory Feeder

    Stock Number: S736633

    Rotary bag filler with 4 stations, semi-automatic. Unit includes vibratory feeder to dump gate discharge. Designed for bags 4-1/4" x 3" x 10" tall. Manual bag placement and removal with foot pedal actuated dump. Unit has all stainless steel contact parts, last used filling coffee in bags. Manufacturer unknown.
  27. Filler, Bag, Rotary, 4 Station, S/st, Vibratory Feeder

    Filler, Bag, St. Regis, Pneumatic, Single Spout,

    Stock Number: S330206

    Bag packer, St. Regis, pneumatic, single spout valve filler, 2" diameter, serial# 1542C-6. Chromalox controller, Serial number 910, 120V, 100w, showing feed gate, chamber exhaust, bag discharge and bleeder controls. Unit has been sandblasted and painted. Missing some parts.
  28. Filler, Bag, St. Regis, Pneumatic, Single Spout,

    Filler, Bag, Stoker, Mdl 15VR, C/st, Single, Auger, (2)

    Stock Number: S739812

    (2) Stoker bag filler / packer, model 1-5V-r, single carbon steel auger with mechanical scale, 2" dia shaft and shaft mounted reducer. Unit is all carbon steel contact parts with 2" carbon steel auger, 3 hp, 3/60/230/460 volt, 1750 rpm, serial numbers 756 and 1226.
  29. Filler, Bag, Stoker, Mdl 15VR, C/st, Single, Auger, (2)

    Filler, Bag, Weigh, Open Mouth, Taylor, Model TE100,

    Stock Number: A739479

    Taylor Products bag filler with model TE100 electronic small bagging scale and T4000 weigh controller. The TE100 is an electronic, self-correcting, small bagging scale, using a single load cell. Includes cabinet, shut off gate, dribble gate, load cell, control box, FRL assembly, spout, clamp arms, etc. T4000 Controller includes LCD panel, key pad, cable and electrical enclosure. System was used sparingly and is in like new condition.
  30. Filler, Bag, Weigh, Open Mouth, Taylor, Model TE100,

    Filler, Bottle, 12-valve, Rotary, Fogg, S/st, 3/4 HP,

    Stock Number: C736039

    Fogg rotary filler, 12 valve unit, stainless steel, has snap capper, Model DLH, run with 3/4 HP, 230/460V, 1750 RPM. Nozzle size is 1" diameter. Serial number 5901-87, fills 1 pint to 1/2 gallon.
  31. Filler, Bottle, 12-valve, Rotary, Fogg, S/st, 3/4 HP,

    Filler, Bottle, 14-head, S/st, Vacuum, Rotary, Horix

    Stock Number: S739445

    Rotary vacuum bottle filler, 14-head, stainless steel contacts with belt conveyor. Previously used for PVC and PET bottles, running Hexol on the filler. Filling 22-ounce flat panel bottles and 16-ounce round bottles of another pine cleaner. Line would run about 15-20 bottles per minute. Appears to be a Horix filler.
  32. Filler, Bottle, 14-head, S/st, Vacuum, Rotary, Horix

    Filler, Bottle, 2-head, Inline, S/st, Positive Displacement

    Stock Number: A737547

    Bottle filler, 2-head, inline filling systems, positive displacement filler. Includes (2) heads/pumps, with 40 gallon holding tank. Rated for 220V, 60Hz electricity, 80 PSI pneumatic requirement, VDU control base with memory function.
  33. Filler, Bottle, 2-head, Inline, S/st, Positive Displacement

    Filler, Bottle, 28 Valve, Rotary, Cemac, S/st, 3/4" Nozzles

    Stock Number: C737813

    Rotary filler, Cemac, 28-valve, 3/4" diameter nozzles, stainless steel contacts, gravity flow. Bottles sit on 4-1/2" x 5-1/2" base plates, complete with drives, star wheels & other parts. Unitized on mild steel base, includes cap feeder, mfg. by Consumer Cap Corp, Model 18SS50100, with stainless steel hopper & vibrator feeder.
  34. Filler, Bottle, 28 Valve, Rotary, Cemac, S/st, 3/4" Nozzles

    Filler, Bottle, 5 Head, Pressure, S/st, 1" Dia. Nozzles

    Stock Number: C737815

    Filler, 5 head, pressure type, 1" diameter nozzles, stainless steel contacts, adjust height, set up to accommodate 4" wide conveyor, can by adjusted up to 9" stainless steel feed hopper, thru manifold to hoses for fill nozzles, less pump.
  35. Filler, Bottle, 5 Head, Pressure, S/st, 1" Dia. Nozzles

    Filler, Bottle, 6 Head, Inline, C/st,

    Stock Number: C739591

    Pressure bottle filler, 6-head inline, pneumatically foot actuated and adjustable for valve lift, 5/8" diameter nozzles, mild steel frame, no nameplate data available.
  36. Filler, Bottle, 6 Head, Inline, C/st,

    Filler, Bottle, 6 Valve, Federal, S/st, 1/2 HP

    Stock Number: C736038

    Filler, bottle, manufactured by Federal, stainless steel, 6 filling valves. Unit is right-hand set up with nozzle sizes of 1" dia, fills 1/2 pint to 1/2 gallon, run with 1/2 230/460V, 1750 RPM drive, machine number 386A62RS221, part number 5439182.
  37. Filler, Bottle, 6 Valve, Federal, S/st, 1/2 HP

    Filler, Bottle, 8 Valve, Simplex, Inline, S/st, Automatic,

    Stock Number: C331976

    Filler, bottle, simplex 8 valve inline pressure type filler with vacuum de-foaming capabilities. Unit is simplex Model 480A, serial number 4075, pneumatically actuated and adjusted for valve lift, complete with stainless steel contact parts, stainless steel feed pump, vacuum pump for de-foaming and flow control pneumatic logic controller. Filler is in good condition, less conveyor, complete with 8 filling heads, ( 1 damaged). Unit is 150 PSI max, 230/460V. Diameter of the valve: 9/16" (14.28mm)
  38. Filler, Bottle, 8 Valve, Simplex, Inline, S/st, Automatic,

    Filler, Bottle, 8-head, Rotary, S/st, Shibuya Kogyo,

    Stock Number: C740214

    Shibuya Kogyo 8-head rotary bottle filler, previously filling 750 mL wine bottles. Shibuya Model# RF-508, rated for approximately 60 bottles/min. Serial# RF-5508. Offered less nozzles and conveyor. Includes control panel.
  39. Filler, Bottle, 8-head, Rotary, S/st, Shibuya Kogyo,

    Filler, Bottle, Nu-way, 5 Station, S/st,

    Stock Number: S332387

    Filler, Nu-Way model 25, 5 station, with stainless steel contact parts. Unit includes 12" wide roller conveyor at inlet, pneumatic and electrically actuated. Serial number 41873.
  40. Filler, Bottle, Nu-way, 5 Station, S/st,

    Filler, Bottle, Pressure, Single Head, S/st,

    Stock Number: Z332395

    Pressure bottle filler, single head, stainless steel, up to 5 gallon, type fsin, crandal, bottom fill, with balance scale, pump, 1 HP, 1725 RPM, 230/460V motor, unitized on stand, 5 GPM. Unit manufactured by crandall filling machinery, buffalo, ny.
  41. Filler, Bottle, Pressure, Single Head, S/st,

    Filler, Box, Lakewood, Md. P250, Blueberries

    Stock Number: A740865

    Box filler, manufactured by Lakewood, model number SP250. Unit designed to convey product into initial hopper and then onto two separate feeder trays. Trays feed weigh-hoppers above empty boxes ready to be filled. All stainless steel contacts. Rated for up to 8,000 lbs/hr depending on product. Previously used in fruit (blueberry) operation. Very good condition.
  42. Filler, Box, Lakewood, Md. P250, Blueberries

    Filler, Can, 3", 3/4 HP, Less Hopper

    Stock Number: C731973

    Can filler, 12 valve, 3" valves, complete with 3/4 HP 1725 RPM 115/230V single phase motor thru gearbox reducer. Unit is less hopper.
  43. Filler, Can, 3", 3/4 HP, Less Hopper

    Filler, Can, Liquid, 18 Valve, Horix,

    Stock Number: C333700

    Horix rotary filler, 18 valve, systems previously filling cans. Set for 211 diameter cans. Stainless steel contacts as well as stainless steel bowl on top.
  44. Filler, Can, Liquid, 18 Valve, Horix,

    Filler, Can, Liquid, 211 Dia, 18 Valve, FMC, S/st,

    Stock Number: Z333485

    FMC liquid can filler, Econovac, 18 valve, syruper, 211 diameter , stainless steel contact parts, with vacuum pump.
  45. Filler, Can, Liquid, 211 Dia, 18 Valve, FMC, S/st,

    Filler, Can, Liquid, 300 Dia, 18 Valve, FMC, S/st,

    Stock Number: Z333550

    Filler, can, liquid, FMC, 18 valve, 300 diameter can, stainless contact parts, BSM valve center, vent discharge to worm infeed, clockWise rotation, can be set on 211 - 404 diameter can. M&S serial number 1275.
  46. Filler, Can, Liquid, 300 Dia, 18 Valve, FMC, S/st,

    Filler, Can, Liquid, 404 Dia, 10 Valve, FMC, S/st, Mdl 80,

    Stock Number: Z334400

    Filler, FMC Model 80, 10Valve for liquid filling into cans. Presently set-up for 404 diameter cans. All stainless steel contacts. Serial number 10-1341.
  47. Filler, Can, Liquid, 404 Dia, 10 Valve, FMC, S/st, Mdl 80,

    Filler, Can, Liquid, 404 Dia, 24 Valve, FMC, Seamer, Star,

    Stock Number: Z333100

    FMC liquid can filler, 24 valve, 404 diameter, seamer drive, star infeed.
  48. Filler, Can, Liquid, 404 Dia, 24 Valve, FMC, Seamer, Star,

    Filler, Can, Liquid, Rustco, 18 Valve, 401 Dia, S/st,

    Stock Number: C333290

    Filler, can, liquid, Rustco, 18 valve, 401 dia, stainless steel, to include base & support structure.
  49. Filler, Can, Liquid, Rustco, 18 Valve, 401 Dia, S/st,

    Filler, Can, Seamer, Labeler, Retort, Tanks

    Stock Number: A740805

    Can filler, seamer, and labeler, manufactured by De Santis. Unit is designed to apply labels to round containers with parallel sides in label area. Unit is gravity fed. Unit includes hand wheel for manual adjustment to suit various can diameters. Line includes retort for cooking. Previously used in food operation. Good condition.
  50. Filler, Can, Seamer, Labeler, Retort, Tanks

    Filler, Capper, Scoma/zalkin, 16-head Fill, 6-head Cap,

    Stock Number: S733238

    Monobloc filling and capping system, to include Scoma 16-head rotary filler, Model number E-79, stainless steel contacts, with motor drives and electricals, filling valves are on 5" centers. Also includes Zalkin capper, 6 head, model CA-5, Serial# 13353, previously capping 38mm screw caps with safety seals. Includes motor drives and electricals. Capable of running 0.5 liter & 1.5 liter bottles. New in 1986. Good condition.
  51. Filler, Capper, Scoma/zalkin, 16-head Fill, 6-head Cap,

    Filler, Capsule, Index, Mdl 1500, Size 0 Capsules

    Stock Number: A740707

    Capsule Filler, manufactured by Index Manufacturing Co., Inc., model number 1500. Last used in the production of nutritional supplements in an "0" capsule design. Unit includes control panel as well as feed hopper and auger. Good condition.
  52. Filler, Capsule, Index, Mdl 1500, Size 0 Capsules

    Filler, Capsule, Noah, Mdl 200C, NJP Automatic

    Stock Number: S739998

    Rotary capsule filler, manufactured by Noah, NJP Automatic, model number 200C. Currently set for size "00" capsules. Unit includes 2" diameter capsule discharge. Driven by 3.7 Kw (5 HP) motor. New in 2010. Serial number 1000119. Previously used in pharmaceutical application.
  53. Filler, Capsule, Noah, Mdl 200C, NJP Automatic

    Filler, Carousel Type, 14 Station, Depositor, S/st

    Stock Number: C735802

    Carousel type depositor filler for dry goods. Unit is 14 station mounted on chain drive, complete with stainless steel funnels for directing materials onto product on lower conveyor, not included. Fennels measure 7" diameter x 8" deep with 1-7/8" diameter disch on bottom. Unit is offered less drive, designed to be driven off lower conveyor. Unit is in fair condition, offered as-is.
  54. Filler, Carousel Type, 14 Station, Depositor, S/st

    Filler, Cup, 6-Lane, S/st, Oystar, Yogurt, Particulates,

    Stock Number: A740498

    Oystar Model FP 2x6 Series Preformed Cup Filling Machine, previously used to fill yogurt with particulates. Pre-set Yogurt with 1/4" Particulates, previously filling 4,6, & 8 oz containers. Six lane, 12 position reciprocating spiral type with height adjustment. New in 2009 and in very good condition.
  55. Filler, Cup, 6-Lane, S/st, Oystar, Yogurt, Particulates,

    Filler, Cup, Akra-pak, Mdl OSF64B, Lidder, Food Grade,

    Stock Number: C334802

    Filler, cup, lidder, Rutherford Akra-Pak, Model OSF64B, dual piston. Filler capable of filling 14 oz and 20 oz cups or tubs. Unit complete with shuttle, vertical cup dropper and lid placer, dual lidder. Model DCEVL. 16" x 8' product conveyor and provisions for bottom ink coder. Pistons and lid placers are air actuated. Unitized on common skid, 3 1/2" w x 13' long x 7' h. Serial number 653 (1990).
  56. Filler, Cup, Akra-pak, Mdl OSF64B, Lidder, Food Grade,

    Filler, Cup, Fill-Tech, 2-Lane, Tubs, Sealer, Lidder,

    Stock Number: S740695

    Fill-Tech dual lane tub filling and tamper evident overcapping machine, tooled for 5-7/8" diameter, 45/60-ounce tubs, 3-pound tubs, includes change parts for 5-pound tubs. Equipment is all stainless steel construction. Previously used in dairy type operation. System includes tub denester, piston filling station, and heat sealing station which applies a tamper evident seal through a lidding section with lid feed chute. Also includes pressure rollers. Complete with touch screen and panel. Includes all drives. Removed from service in October 2016. Good condition.
  57. Filler, Cup, Fill-Tech, 2-Lane, Tubs, Sealer, Lidder,

    Filler, Cup, Sealer, Lidder, Phoenix, Chili

    Stock Number: A740671

    Phoenix Tamper-Evident CTL Cup filler, sealer, and lidder. Unit is capable filling/lidding cups between 3" and 9" diameter. Includes "no-drip" filler with 1/2% accuracy rate with most products dependent on container volume, constant viscosity and temperature of product. Includes programmable limit switch PLS and all related electrical hardware. Previously used in food operation. Very good condition.
  58. Filler, Cup, Sealer, Lidder, Phoenix, Chili

    Filler, Cup, Tray, 2 Lane, Piston Filler, FEMC, Lidder

    Stock Number: A740732

    FEMC Retail Line 2-Lane piston filler with lidder. Unit includes stainless steel feed hopper and denester for trays. Complete with discharge conveyor with laner. Includes control panel. Previously used in food operation. Very good condition.
  59. Filler, Cup, Tray, 2 Lane, Piston Filler, FEMC, Lidder

    Filler, Cup, Tray, 2 Lane, Piston, Lidder, 3 Lbs Tubs,

    Stock Number: A740735

    2-Lane horizontal piston filler with lidder. System includes stainless steel feed hopper and denester as well as buggy dumper. Complete with date coder and printer. Last filling three (3) pound tubs of product and passing tubs through polypack overwrapper and shrink tunnel. Previously used in food operation. Very good condition.
  60. Filler, Cup, Tray, 2 Lane, Piston, Lidder, 3 Lbs Tubs,

    Filler, Cup, WA Lane, Mdl 678, S/st, 10-Head, Sealer, (3)

    Stock Number: S740393

    (3) W.A. Lane cup filler & sealer system, believed to be model 678. Set up as 10-head inline filling with (2) rows of (5) filling heads per side, filling head nozzles measures 5/16" diameter. Also includes sealer to apply seals to top of filled cups. Complete with conveyor, measuring 12" wide x 12' long, passing through filler & sealer sections. Conveyor includes cups molds to convey condiment sauce cups. Two (2) units are set up to accommodate 1.625" L x 1.187" W x 1" deep cups and One (1) set up to accommodate 1.906" L x 1.406" W x 1" deep cups. Previously used at major sauce manufacturer to supply condiments in portion pack cups. In working condition when removed from service.
  61. Filler, Cup, WA Lane, Mdl 678, S/st, 10-Head, Sealer, (3)

    Filler, Cup, World Cup, Mdl 8-12, A3 Rotary Filler

    Stock Number: A740435

    Rotary cup filler, manufactured by World Cup, model number 8-12. Unit is an automatic, eight-pocket intermittent motion cup filler. Unit is rated for up to 45 cups per minute depending on product and application. ? ounce to 8 ounces fill range. Unit is set for container sizes up to 3.18" diameter. Includes control panel. Previously used in pharmaceutical application.
  62. Filler, Cup, World Cup, Mdl 8-12, A3 Rotary Filler

    Filler, Drum, Crandell, Scale, Hydraulic, S/st,

    Stock Number: S330010

    Crandel, semi-automatic drum filler, model FSS-Dum. One hydraulic system for raising and lowering stainless steel drum head, is semi-automatic, gravimetric with over and under scale and automatic shut-off. Filler is portable, complete with roller conveyor mounted on scale for easy infeed and discharge of drums, and was New in 1975. Serial# FSSL-4810.
  63. Filler, Drum, Crandell, Scale, Hydraulic, S/st,

    Filler, Drum, Fuller, S/st, Juice, Conveyors,

    Stock Number: C739205

    Drum filler, manufactured by Fuller Weighing Systems, complete with stainless steel roller conveyor line, associated pumps. Model 953070, 1,000-pound capacity. Built 1995. Includes Cardinal Model 748 digital control box. Previously filling 55 gallon drums with juice at 100 drums per hour. Nozzles measure 3" wide. Rollers measure 3" wide by 26" long. Good condition.
  64. Filler, Drum, Fuller, S/st, Juice, Conveyors,

    Filler, Form, Fill & Seal, Automatic Pkg, Mdl H, Scale,

    Stock Number: C731970

    Form fill and seal units, complete with scale mechanism, 4 lane feeding 2 heads each, manufactured by Automatic Packager (Mira-Pak Inc), Model H, Mirawrap series 10,000. Unit is Model H2 1100, serial number 10613 LH, with 2-3/4" filling heads.
  65. Filler, Form, Fill & Seal, Automatic Pkg, Mdl H, Scale,

    Filler, Form, Fill & Seal, Autopack, Liquid,

    Stock Number: S738857

    Autopack form, fill & seal machine, manufactured by Nambuk Industrial Corp, set up to fill liquids into pouches, 4" wide x 3-1/4" long web. Includes 10" diameter x 12" high Supvex glass product vessel. Good condition.
  66. Filler, Form, Fill & Seal, Autopack, Liquid,

    Filler, Form, Fill & Seal, Autowrapper, Mdl RC100, Tea Bags,

    Stock Number: C739922

    Autowrapper Ltd. Model RC100 Form, Fill & Seal machine for producing round filter paper bags with tea leaves, coffee grounds or similar. Previously used to fill 68 mm bags with herbal tea leaves into heat seal-able filter paper. Includes cylindrical stainless steel tea dosing hopper, leading to filling/sealing rolls and then through rotary cutter unit. Includes 6" x 6' take-away conveyor for bags and waste paper rollers. Complete with control panel with variable speed controls, digital temperature readout, batch counter, etc. Unit is in good working condition.
  67. Filler, Form, Fill & Seal, Autowrapper, Mdl RC100, Tea Bags,

    Filler, Form, Fill & Seal, ElPack, Mdl EL-200, Round Cake,

    Stock Number: S740635

    Elpack Vertical Form Fill Seal Machine, model# EL-200, Includes single forming tube, size 3-1/2" diameter, with 10" wide sealing jaw. Previoulsy filling 5-1/3 OZ. bags with blueberry round cakes. Electrics: 220 volts 3/60,v/a 3000. serial number 13250492
  68. Filler, Form, Fill & Seal, ElPack, Mdl EL-200, Round Cake,

    Filler, Form, Fill & Seal, EntrePak, Mdl. SP86, Powder,

    Stock Number: A740867

    EntrePak SP86 Vertical Form Fill Seal Machine for 180 MM wide film and one set of volumetric cups, film print registration, and bag former. Pillow-pack type bags, rated for up to 60 BPM. The SP-86 machine can be configured to pack granular, powder, and liquid products into pillow pack bags from 1" to 7" wide, 0.8" - 9" long, 0.02 - 1.7 fluid ounce fill range. The SP-86 automatically performs all required steps in the packaging process including forming the bag , dispensing the product, sealing the bag, and cutting the bag. The SP-86 is compatible with all common multi-layer packaging materials including paper, foil, PE, OPP, etc. Sealer temperature, length, packaging speed, and dispensed volume are adjustable parameters. The SP-86 in or out of registration tracking mode. Equipment has seen very little use and is in excellent condition.
  69. Filler, Form, Fill & Seal, EntrePak, Mdl. SP86, Powder,

    Filler, Form, Fill & Seal, General Pkg, MAP Flush, Mdl 48WSLC,

    Stock Number: S739428

    General Packaging Equipment Model 48WSLC Vertical Form Fill and Seal Machine. Unit is capable of speeds from 8 to 16 bags per minute. Has a pouch size range of: 1-1/2" to 14" (wide) and 3" to 36" (length). Has a 15" (wide) hot knife seal jaw and a 22" (long) fin seal bar. Is currently set up with a forming horn measuring: 9-1/2" (long) 3-1/2" (wide) with a 3" (diameter) product feed tube. Features a powered auger product hopper and a Moyno pump for sauce/liquid type filling applications. System is controlled with an Allen Bradley SLC 5/05 CPU PLC, and a PanelView touch screen HMI controller. Previously used to fill soups, gravies and salads into 6 to 10 pound bags. 6 amp. 3/60/440V.
  70. Filler, Form, Fill & Seal, General Pkg, MAP Flush, Mdl 48WSLC,

    Filler, Form, Fill & Seal, Hayssen, AR-16, Single Tube,

    Stock Number: S731397

    Hayssen form, fill & seal machine, model AR-16, single tube filler, 4" diameter spout, vertical, stainless steel contact parts, last filling polyethylene bags with seeds, complete with 12" wide heat seal jaws. System also comes with "Hayssen poly bagger", 4-lane vibratory feeders with Eriez, model HHS20 vibrating mechanisms, which mounts above form, fill & seal. Complete with digital controls and appears to be in very good condition. 208 volt, hopper is electric.
  71. Filler, Form, Fill & Seal, Hayssen, AR-16, Single Tube,

    Filler, Form, Fill & Seal, Ilapak, Vegatronic 2000,

    Stock Number: A740274

    Ilapak Type "Vegatronic 2000 Rotatable S" form, fill & seal machine. Previously filling dehydrated chips into various bags, with capabilities of (16) different sizes of bags. Includes change parts for 3 oz bags (3 side seal + gusset, 225mm W x 175mm L), kraft paper laminate & 1 oz bags (pillow-type, 6"W x 9"L), kraft paper laminate. Fed by Yamato automatic combination scale, Yamato model# DW ADW510A. Rated for 40 - 45 PPM for 3 oz. bags and 70 - 80 PPM on 1 oz bags. System includes gas flush system, bridging detector, horizontal and vertical jaws, print registration, touch screen controls, etc. New in 2014 and in very good condition.
  72. Filler, Form, Fill & Seal, Ilapak, Vegatronic 2000,

    Filler, Form, Fill & Seal, Ilapak, VT400, Combination Scale

    Stock Number: A740358

    Illapak Form, Fill & Seal machine, model # VT400 (Vegatronic 400). System includes bagger, Ishida combination scale, metal detector, feed elevator, and mezzanine. Complete with control panel with digital readout on bagger as well as feed elevator. Previously used in food operation. Very good condition.
  73. Filler, Form, Fill & Seal, Ilapak, VT400, Combination Scale

    Filler, Form, Fill & Seal, Onpack, Mld ONP-2030, S/st, (2)

    Stock Number: S737782

    (2) Form, fill and seal machines, manufactured by Orihiro Engineering, OnPack, model(s) ONP-2030AS2, ONF-20303S. Previously used to fill gas into bags for packing of solar panels. Utilizes 3-1/4" wide web (split into 1-1/2" web) and 3/4" wide bag. All stainless steel construction. Includes controls for vertical end heater, central seal, film slitter, knife, pump, and gas valve. Serial numbers 87 and 209. New in 2010. Excellent condition.
  74. Filler, Form, Fill & Seal, Onpack, Mld ONP-2030, S/st, (2)

    Filler, Form, Fill & Seal, Rovema, HVS-160, Horiz, Powders,

    Stock Number: D739396

    Rovema Model HVS-160 Duplex Horizontal Bagging Machine. Includes All Fill dual head auger with agitated hoppers, dual 7/8" diameter discharge. Has a pouch size range: width 2-3/8" to 3-5/32", height 3-5/32" to 8-5/8". Maximum film width 23-5/8". Complete with with 10-1/4" long knife, and (2) 9-1/2" wide seal jaws. Includes Norwood hot stamp date coder, new tear notch station. Good condition.
  75. Filler, Form, Fill & Seal, Rovema, HVS-160, Horiz, Powders,

    Filler, Form, Fill & Seal, Triangle, Pulsamatic, Single Spout,

    Stock Number: C336694

    Filler, form, fill & seal, triangle, pulsamatic, single spout, Model number S5C, serial number 14695, complete with (3) scales, Model number A3H2M, serial number 14695. Unit includes discharge conveyor to turntable station. Last running 10-1/2" wide web on nuts and candies.
  76. Filler, Form, Fill & Seal, Triangle, Pulsamatic, Single Spout,

    Filler, Form, Fill & Seal, Universal Pack, Mdl AlphaM6B,

    Stock Number: D740425

    Universal Pack Model AlphaM6B Stick Pack Form, Fill & Seal Machine. Unit is a "6-up" filler designed for granular and free flowing powders. Capable of speeds up to 100 cycles/minute depending on stick length. Capable of stick sizes ranging from 12mm - 74mm wide and 30mm - 200mm long. Dose volumes from 0.1 - 200 grams. Unit has a maximum sealing width of 600mm with a max reel diameter of 1200 mm. Unit driven by 208-230/460V, 3/60Hz motor. New in 2006. Very good condition.
  77. Filler, Form, Fill & Seal, Universal Pack, Mdl AlphaM6B,

    Filler, Form, Fill & Seal, Viking Masek, Mdl HBV4C,

    Stock Number: A740424

    Viking Masek Model HBV4C Stick Pack Form, Fill & Seal Machine. Unit has four lanes with tooling for 23 and 35 mm. Capacity of up to 80 cycles/min depending on pack length. Capable of bag widths from 16 - 50 mm, bag lengths of 50 - 200 mm. Unit has a maximum foil reel width of 560 mm. Driven by 480V, 3/60Hz motor. New in 2010. Previously used in beverage operation. Very good condition.
  78. Filler, Form, Fill & Seal, Viking Masek, Mdl HBV4C,

    Filler, Hopper, S/st, 4 Spout, 1-1/2" Dia

    Stock Number: C734567

    Stainless steel filler/hopper 22"x 20"x 20" guides the product down to 4 openings, each 1-1/2" dia, emptying into shuttle cavities 1" deep. A 2-1/2 x 5-1/2" cylinder drive the shuttle to release contents simultaneously. 5" centers, hopper has high and low level sensors (turck) for automatic loading. Unit last run on granola. Shuttle depth can be adjusted.
  79. Filler, Hopper, S/st, 4 Spout, 1-1/2" Dia

    Filler, Piston, 12-Head, Sidel, Monobloc, Zalkin Capper,

    Stock Number: C738358

    Sidel monobloc filling & capping line with CIP system, set up to run numerous product viscosities with a wide range of particulate content. Sanitary construction and in like new condition. Complete system includes Sidel, Model Hema EV12, 12-head rotary piston filler with Sidel programmable "E-fill" independent servo controlled pistons with pneumatic actuators, includes change parts for 6, 12, 16, 32 & 48 ounce bottles; Zalkin 8-head magnetic screw capper with jaws (change parts to run metal or plastic lids), includes U750 cap hopper, elevator, sorter and feed chute, set up for 33 and 38 mm caps; jacketed product tank with agitation; CIP system, including 250 gallon tank, pumps, hopper, fan, spray ball and fixed jets; belt conveyor with vari-speed controls; Allen-Bradley touch screen controls; stainless steel nema 4 electrical enclosure; Includes spare Sidel rotary piston filler & capper monobloc (unused. parts machine). Excellent condition.
  80. Filler, Piston, 12-Head, Sidel, Monobloc, Zalkin Capper,

    Filler, Piston, 14-Head, Rotary, Elmar, Mdl RPE214ILH,

    Stock Number: C732191

    Elmar 14 head rotary piston filler, Model RPE214ILH, complete with infeed worm and star wheel, counter clockWise rotation. Maximum fill 56 oz. Pistons are 3.75" x 11" can size 401 to 404.
  81. Filler, Piston, 14-Head, Rotary, Elmar, Mdl RPE214ILH,

    Filler, Piston, 14-Head, Rotary, S/st, Elmar Indus

    Stock Number: S735565

    Elmar Industries 14 valve rotary piston filler. Unit is stainless steel contacts, model RPE-414 RB1-LH, 2-7/16" piston and 12" stroke. Unit has 4" x 4'6" discharge conveyor, missing (2) pistons (1) actuartor. Serial number EW-84-8148.
  82. Filler, Piston, 14-Head, Rotary, S/st, Elmar Indus

    Filler, Piston, 2-Head, Filamatic, S/st, Tubes, Rotary

    Stock Number: S736393

    Filamatic twin head piston filler, model DAB-8-2. Filler is all stainless steel contact parts complete with National Instruments valves and fill cylinders for 85 cc capacity, (1. 25" diameter x 4.25" stroke). Unit last run filling tubes in semi-automatic rotary table with 12 stations, set for manual insert and removal of tubes. Unit is in excellent condition, last used filling dental epoxy into tubes.
  83. Filler, Piston, 2-Head, Filamatic, S/st, Tubes, Rotary

    Filler, Piston, 2-Head, Inline, Filimatic, S/st

    Stock Number: S739383

    Filimatic stainless steel 2-head piston filler. Unit has Lesson DC speed controller, is missing on piston.
  84. Filler, Piston, 2-Head, Inline, Filimatic, S/st

    Filler, Piston, 2-Head, Volumetric Tech, S/st, Food Grade

    Stock Number: D740708

    Stainless steel, food grade, dual head piston filler, capable of hot or cold fill, previously running sauce at 40 containers/minute. Manufactured by Volumetrice Technologies, set up for 11.5oz - 32oz stroke. Complete with Micrologix processor with modern controls. New in 2011. Very good condition.
  85. Filler, Piston, 2-Head, Volumetric Tech, S/st, Food Grade

    Filler, Piston, 4-head, Depositor, Moline, Stainless Steel,

    Stock Number: S739760

    Four head piston filler/depositor, manufactured by Moline, model number PPS24, serial number PPS72112. Unit has four (4) 3" diameter auger cylinders; two of the heads include stainless steel augers. Augers are split to two 1-1/2" diameter flexible hoses with 1" diameter outlets. Includes small feed hopper with agitator arms. Unit driven by Dodge 262 Tigear Relialube system with approximately 5 HP motor. Complete with start/stop controls. Mounted on stainless steel frame. Previously used at dessert manufacturing facility.
  86. Filler, Piston, 4-head, Depositor, Moline, Stainless Steel,

    Filler, Piston, 4-Head, Filamatic, Mdl CVM300, 1 Ltr, S/st

    Stock Number: S732732

    Piston filler, Filamatic model CVKM-300-1 with 4 pistons, each with 1000 cc or 1 liter capacity. Unit is stainless steel contact parts, complete with conveyor, mild steel frame. Filler is in good condition, last run on copy machine toner, would need to be cleaned well for food use. Includes conveyor controls and drip tray controls. Serial number 13404.
  87. Filler, Piston, 4-Head, Filamatic, Mdl CVM300, 1 Ltr, S/st

    Filler, Piston, 4-Head, S/st, Agitated Hopper, (2)

    Stock Number: S738855

    (2) Stainless steel 4-head piston filler, includes (2) split agitated hoppers, to prevent bridging, designed to fill powders. Hoppers feed to 3" diameter outlet, connected to funnel shaped attachment, tapering discharge to 1/2" diameter. Pistons are mechanically actuated and include independent drives. Offered with control panels.
  88. Filler, Piston, 4-Head, S/st, Agitated Hopper, (2)

    Filler, Piston, 6-head, Depositor, Stainless Steel,

    Stock Number: S739761

    Six head piston filler/depositor, stainless steel contacts. Unit includes six (6) 1" diameter mechanically operated heads with pneumatically controlled valves. Complete with feed hopper measuring 21" X 15-1/2" X 28" deep. Mounted on stainless steel frame with casters. Previously used at dessert manufacturing facility.
  89. Filler, Piston, 6-head, Depositor, Stainless Steel,

    Filler, Piston, 6-Head, S/st, Rationaton, DC Control

    Stock Number: S734910

    Rationator 6-head stainless steel piston filler. Unit is type MULT 4/6, with DC control panel. Manufactured in West Germany. Electricals are 208 volt 3-phase. The six pistons measure 3-3/4" diameter x 11" long for a maximum capacity of 110 cubic inches or about 60 fl oz per cylinder fill. Vertical pistons, pneumatically operated. Serial number 1185. And is complete with control panel, no conveyor. Last used on bottles for creams in cosmetics facility.
  90. Filler, Piston, 6-Head, S/st, Rationaton, DC Control

    Filler, Piston, 8 Head, Inline, S/st

    Stock Number: S740365

    8 head inline stainless steel piston filler. Unit has (4) heads per side, set up for (2x) heads per side. Heads are 1/16" dia. Unit has 3-1/4" wide x 9' long conveyor with 3-1/4" wide x 4' infeed conveyor. No nameplate data.
  91. Filler, Piston, 8 Head, Inline, S/st

    Filler, Piston, Filamatic, 4 Head, S/st,

    Stock Number: S341581

    Filamatic 4 head inline filler with provisions for up to 4 filling cylinders. With infeed and discharge conveyor, with Filamatic pneumatic vial cleaner. Filler model 120-4 with capacity of 4 x 520cc. Designed to run 220 volt 3-phase 60 cycle. Serial number 005210. Vial cleaner is model a-4 with 12" stroke, designed to run on 115 volt, 1 phase. Serial number 005212. Does not include fill cylinders.
  92. Filler, Piston, Filamatic, 4 Head, S/st,

    Filler, Piston, FMC, M&S, 12 Piston, Mdl C-120, S/st, (2)

    Stock Number: S339025

    (2) FMC Model C-120 rotary piston fillers, 12 pocket with all contact parts being sanitary stainless steel. They are equipped with no can no fill mechanism, seamer driven, serial numbers HR2797 and HA2874, condition good.
  93. Filler, Piston, FMC, M&S, 12 Piston, Mdl C-120, S/st, (2)

    Filler, Piston, FMC, M&S, 20 Piston, 32 Oz. Can,

    Stock Number: C338507

    FMC Model M&S 20 pocket piston filler, with 2-3/4" diameter pistons, 1-1/2" filling valves, drop chute to star infeed, tangential discharge for hook up to seamer. Unit has all stainless steel product contact parts and a no-can / no-fill mechanism.
  94. Filler, Piston, FMC, M&S, 20 Piston, 32 Oz. Can,

    Filler, Piston, FMC, S/st, 9 Piston, 401 Dia,

    Stock Number: Z340385

    Filler, piston, FMC, 9 piston, last filling 307 diameter cans, stainless steel contacts. Star infeed. Missing some parts.
  95. Filler, Piston, FMC, S/st, 9 Piston, 401 Dia,

    Filler, Piston, Single Head, Pump Filler, S/st, Pneumatic,

    Stock Number: C740415

    Stainless steel piston pump filler. Includes all stainless steel 30" x 30" x 26" deep hopper with pyramid shaped bottom, leading to 3" diameter center bottom outlet. Hopper is connected to horizontal piston pump that pulls the material from the hopper and pumps is out a 3" diameter outlet. The outlet is connected to a 2" diameter vertical piping. Piston measures 5" diameter X 10" long, pneumatically controlled and includes pneumatic switch. Unitized on stainless cart with casters. Has been tested and is in working condition.
  96. Filler, Piston, Single Head, Pump Filler, S/st, Pneumatic,

    Filler, Piston, Single, Hinds-Bock, S/st, SP-64

    Stock Number: S740075

    Hinds-Bock stainless steel single-head piston filler, model # SP-64. Stainless steel hopper measures 22" diameter X 16" deep. Piston is pneumatically operated, cylinder measures 2" diameter X 6" long, with 1" diameter outlet. Mounted on stainless steel cart with casters. Previously used in food operation. Very good condition.
  97. Filler, Piston, Single, Hinds-Bock, S/st, SP-64

    Filler, Piston, Single, Nrm Elgin, Mdl MR10

    Stock Number: S730134

    RM Elgin eight filler with in/out feed conveyor. Unit has (1) filling piston only. Unit capable of 10 spouts
  98. Filler, Piston, Single, Nrm Elgin, Mdl MR10

    Filler, Piston, Single, S/st, Pneumatic, Hopper

    Stock Number: S737290

    Stainless steel single piston filler. Unit has 2-1/2" diameter x 5" long filling piston. Unit is pneumatic, includes 23" x 18" hopper. Unit is on wheels, carbon steel frame. Good working condition.
  99. Filler, Piston, Single, S/st, Pneumatic, Hopper

    Filler, Piston, Single, Turbo Systems, Stainless Steel,

    Stock Number: S739763

    Turbo systems single head piston filler, model number NMD930290. Stainless Steel contacts. Unit includes feed hopper measuring 14" X 21" X 16" deep with 1-1/2" diameter outlet. Includes adjustable speed controls. Unit is pneumatically operated and can be fitted with 1-1/4", 2", 3", or 4-1/2" cylinders. Previously used at dessert manufacturing facility.
  100. Filler, Piston, Single, Turbo Systems, Stainless Steel,

    Filler, Piston, Votator, Mdl P-9-GL, 502 X 512,

    Stock Number: Z339691

    Votator piston filler, Model P-9-GL, 502 x 512 can size, 5-1/4" piston diameter , valve size 2-1/16" inlet and 1-1/2" outlet, 20 gallon maximum bowl capacity, with working level of 10 gallons, clockWise bowl rotation, 2 cans per revolution of drive shaft discharge, less motor.

Items 1 to 100 of 128 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

Please wait...