+1-415-467-3400

Feeder

65 Item(s)

per page

Set Descending Direction
  1. Feeder, Acrison, Mdl 203-130P, 1 HP,

    Stock Number: Z328756

    Acrison feeder, Model 203-130P, 12" x 18" feed chamber with cover, 1 HP vari speed motor.
  2. Feeder, Acrison, Mdl 203-130P, 1 HP,

    Feeder, Acrison, Mdl 402X, 115 Volt, Scale, S/st

    Stock Number: S739950

    Acrison scale feeder, stainless steel contact parts, model 402X-5000-1200-VTF. Unit has (2) top inlets of 9-1/2" and 5-1/2", 8" outlet spout with Syntron Magnetic Feeder mdl F212b. Hopper measures 40" x 34" x 36", 115 volt. Electric controls included. Serial number 02432-01.
  3. Feeder, Acrison, Mdl 402X, 115 Volt, Scale, S/st

    Feeder, Apron, 55" X 45', FAM, Hydraulic, Heavy Duty,

    Stock Number: S738504

    Heavy duty Apron feeder, measures 55" wide x approximately 45' long (1500mm wide x 15m long), manufactured by FAM, inclined feed; includes dribble conveyor. Feeder driven by twin Hagglunds Marathon (Sweden) hydraulic drive, type MB400 CN 0200, 24145 cm3 displacement, 400 Nm bar torque, 350 bar pressure, 25 RPM, 1625 kg. Conveys product to double roll crusher. Previously used at phosphate minerals processing plant. Pans were recently changed.
  4. Feeder, Apron, 55" X 45', FAM, Hydraulic, Heavy Duty,

    Feeder, Belt, 24" x 18', C/st, Rubber Belt, 3 HP,

    Stock Number: C740546

    Belt feeder, measures 24" wide X 18' long, frame is contructed of carbon steel and includes heavy duty rubber belt, riding on idlers. Belt is driven by 3 HP, 1775 RPM, 208-230/460V motor thru V-belt drive assembly. Belt is 18" off ground. Previously used to convey compost discharged from ribbon mixer (Item# C740463). Good condition.
  5. Feeder, Belt, 24" x 18', C/st, Rubber Belt, 3 HP,

    Feeder, Belt, 80" X 45', C/st, Hydraulic, Grizzly

    Stock Number: S738502

    Belt feeder, measures 80" wide x 45' long belt conveyor, rubber belt, 36" high sidewalls, with inspection door, belt running on impact idlers, conveyor is hydraulically driven by Hagglunds Marathon (Sweden) hydraulic drive, type MB400 CN 0200, 24145 cm3 displacement, 400 Nm bar torque, 350 bar pressure, 25 RPM, 1625 kg. Belt feeder is fed through dump hopper with grizzly scalping bars, hopper measures 18' x 10', with 25' high sidewalls. Belt feeder discharges on take-away conveyor to mill building. Previously used at phosphate minerals processing facility.
  6. Feeder, Belt, 80" X 45', C/st, Hydraulic, Grizzly

    Feeder, Belt, Hyer, S/st, 24" X 5', 1/4 HP,

    Stock Number: S328655

    Hyer belt feeder, 24" wide x 5' long, 1/4 HP Reliance gear head motor drive, stainless steel, is in good condition.
  7. Feeder, Belt, Hyer, S/st, 24" X 5', 1/4 HP,

    Feeder, Belt, Weigh, Accurate, Mdl DEA300, 12" x 4', S/st

    Stock Number: C736044

    Schenk Accurate Model DEA300-27 weigh belt feeder. Unit has 12" wide belt x 4' long and is complete with single point stainless steel load cell with 7kg capacity. Unit has 304 stainless steel and urethane contact parts, feeder is in excellent condition, complete with 10 cu.ft. feed hopper. Has 5 HP 230/460V, 1700 RPM drive with sew-euro drive gear reducer, 55.87:1. Mfg 2006, serial number 015850-OSA-WB300.
  8. Feeder, Belt, Weigh, Accurate, Mdl DEA300, 12" x 4', S/st

    Feeder, Bottle, Hoppmann, Plastic Bottle

    Stock Number: S328955

    Hoppman Corp. plastic bottle feeder for filling line. Unit is a model FT, Series 50. Unit features stainless steel product contact parts, stainless steel stand and frame assembly. Last used in filling line for pharmaceutical application. Unit is powered by Baldor 1 HP gear head drive motor and includes discharge conveyor drive, less conveyor. Unit manufactured new 1987, Serial number 4272.
  9. Feeder, Bottle, Hoppmann, Plastic Bottle

    Feeder, Bottle, Rotary, Omega, 8" Sections

    Stock Number: S734943

    Omega rotary bottle feeder / sorter, 1/8 HP on hopper, 36" x 16", chute size 2" to 1-3/4" with 8" section feeders. Unit is carbon steel frame.
  10. Feeder, Bottle, Rotary, Omega, 8" Sections

    Feeder, Breaker, Stamler, 200 Hp, Mdl BF-17B-8-74C, (2)

    Stock Number: A738690

    (2) Stamler feeder / breaker, manufactured by Joy-Stamler, Model number BF-17B-8-74C, 200 HP, conveyor is hydraulically driven, hydraulic tram, 3-way car, beaver tail standard 74C ton, used from 2009 - 2013. Highest point of conveyor is 37" high.
  11. Feeder, Breaker, Stamler, 200 Hp, Mdl BF-17B-8-74C, (2)

    Feeder, Can, Screw, Ramsey, Mdl WLS,

    Stock Number: C328965

    Feeder, can, Ramsey Model WLS, serial number A601013, screw type infeed with 1/2 HP 1725 RPM motor.
  12. Feeder, Can, Screw, Ramsey, Mdl WLS,

    Feeder, Cap, 36" Dia., Vibratory Cap Feeder, (3)

    Stock Number: S735379

    (3) Jack vibratory feeders, cap feeders. 36" diameter. 110V, 6.5 amps, 60 cycle, 1-phase.
  13. Feeder, Cap, 36" Dia., Vibratory Cap Feeder, (3)

    Feeder, Cap, 42", Bowl, Epoxy, Cal Vibratory Feeder

    Stock Number: S739531

    California Vibratory Feeders Inc bowl feeder. Unit is 42" dia x 24" deep, is epoxy lined with carbon steel frame, saddle volts of 120, 60 cycle, 45 rpm.
  14. Feeder, Cap, 42", Bowl, Epoxy, Cal Vibratory Feeder

    Feeder, Cap, Jet Flow, S/st, Mdl B057380310, 2.5 HP, (2)

    Stock Number: S739599

    (2) Jet flow cap feeder model B057380310, stainless steel contact parts, has 4" discharge chute, 45" x 33" x 24" hopper, includes Syntron magnetic feeder and minisprial blower, 2.5 hp, 208/230/460 volt, 3450 rpm.
  15. Feeder, Cap, Jet Flow, S/st, Mdl B057380310, 2.5 HP, (2)

    Feeder, Fruit/ingredient, Crepaco Mdl S430, S/st, Hydraulic,

    Stock Number: D733928

    Crepaco fruit/ingredient feeder, Model S430, Stainless steel construction, Stainless steel auger, Stainless steel rotors, SS covers, 6" sightglass on cover, hydraulically operated, 3" bevel seat auger inlet, 3" bevel seat positive displacement pump connection, mounted on casters, electric control, variable speed drive unit, 3 phase, 60 cycle, 230/460 volts.
  16. Feeder, Fruit/ingredient, Crepaco Mdl S430, S/st, Hydraulic,

    Feeder, Inserter, Longford Leaflet, Mdl B700W12, Conv,

    Stock Number: S739387

    Longford Leaflet feeder, model B700W12 Series inserter with shingling conveyor measuring 5" wide x 34" long. Feeder dims are 12" wide x 25" long on adjustable stand. Unit has capacity of up to 300 pcs/min, has min of 2" x 3" up to max of 11" x 11" leaflets. Unit is heavy duty design, high speed feeder. Used for packaging lines, fulfillment and coupons. Excellent condition. Serial number 564343-01.
  17. Feeder, Inserter, Longford Leaflet, Mdl B700W12, Conv,

    Feeder, Inserter, Longford Leaflet, Mdl B700W12, Conv, (2)

    Stock Number: S739386

    (2) Longford Leaflet feeder, model B700W12 Series inserter with shingling conveyor measuring 5" wide x 34" long. Feeder dims are 12" wide x 25" long on adjustable stand. Unit has capacity of up to 300 pcs/min, has min of 2" x 3" up to max of 11" x 11" leaflets. Includes Vision System RVSI Cimatrix Visionscape. Unit is heavy duty design, high speed feeder. Used for packaging lines, fulfillment and coupons. Excellent condition. Serial numbers 56343-01 and 56368-01.
  18. Feeder, Inserter, Longford Leaflet, Mdl B700W12, Conv, (2)

    Feeder, Inserter, Longford Leaflet, Mdl ISC, Conv,

    Stock Number: C739388

    Longford Leaflet feeder, model ISC Series inserter with shingling conveyor measuring 14" wide x 34" long. Feeder dims are 12" wide x 37" long on adjustable stand. Unit has capacity of up to 300 pcs/min, has min of 2" x 3" up to max of 11" x 11" leaflets. Unit is heavy duty design, high speed feeder. Used for packaging lines, fulfillment and coupons. Excellent condition. Serial number 636664-02.
  19. Feeder, Inserter, Longford Leaflet, Mdl ISC, Conv,

    Feeder, Lid, Centrifugal, Hoppman, Mdl FT/50, 1/2 HP, S/st,

    Stock Number: C328810

    Centrifugal lid or cap feeder, Hoppman Model FT/50, 5' diameter stainless steel, with 1/2 HP motor and gearbox drive. All stainless steel contacts.
  20. Feeder, Lid, Centrifugal, Hoppman, Mdl FT/50, 1/2 HP, S/st,

    Feeder, Low Level, Mdl B-14, S/st,

    Stock Number: C328677

    Low level feeder, Smallen Mfg. Co., Model B-14, with 60" x 24" x 12" vibratory hopper and 12' incline conveyor, all stainless steel construction.
  21. Feeder, Low Level, Mdl B-14, S/st,

    Feeder, Reciprocating, Plate Type, 54" X 6'6", S/st,

    Stock Number: C328642

    Reciprocating feeder, 54" wide x 6'6" long, stainless steel contacts. Pan has 3" high side walls and a 4" deep step 3' from the feed end. Feeder is driven by 3 HP 3/60/208-230/460V 1160 RPM motor. Mounted on structural steel frame.
  22. Feeder, Reciprocating, Plate Type, 54" X 6'6", S/st,

    Feeder, Reciprocating, Plate Type, 7" X 27", S/st, 1/3 HP,

    Stock Number: S328643

    Reciprocating feeder, 7" wide x 27" long, stainless steel contacts. Driven by 1/3 HP 1/60/115-208/230/1725/1425 RPM electric motor. Feeder is mounted below a 5' square x 21" deep stainless steel hopper, rated approx 15 cu ft. All mounted on structural steel frame.
  23. Feeder, Reciprocating, Plate Type, 7" X 27", S/st, 1/3 HP,

    Feeder, Screw, 1", S/st, Acrison, Weigh,

    Stock Number: S732072

    Acrison weight-loss differential feeders. Unit includes overhead stainless steel hopper with cover, approx. 7-1/2 cu ft capacity, discharge auger and end plates. Has 1" diameter x 30" long stainless steel wand, mounted on stainless steel base with weigh scale assembly, less scale totalizer. All units less computational modual power supply.
  24. Feeder, Screw, 1", S/st, Acrison, Weigh,

    Feeder, Screw, 1-1/2", S/st, 1.5", Sanitary, Vibra Screw

    Stock Number: S328670

    Vibra Screw sanitary auger ingredient feeder, complete with 1. 5" diameter discharge screw, stainless steel contact parts. Unit includes 20" diameter x 18" tall slope bottom vibratory feed hopper, with manual adjustable discharge. Unit has 3/4 HP Reliance 230/460V vari-speed Reeves drive. Serial number 831150 and is in good condition. Unit last used as ingredient feeder in ice cream processing facility.
  25. Feeder, Screw, 1-1/2", S/st, 1.5", Sanitary, Vibra Screw

    Feeder, Screw, 2" X 18", C/st, 1/3 HP, Vibra Screw

    Stock Number: S731570

    Feeder, Vibra Screw feeder, mild steel, 18" diameter x 18" high feed hopper with 2" ID discharge tube with helical coil type screw. Screw is driven with a 1/3 HP motor through vari-drive, the feeder is mounted on stand with adjustable height and is portable with casters.
  26. Feeder, Screw, 2" X 18", C/st, 1/3 HP, Vibra Screw

    Feeder, Screw, 2", S/st, 1/3 HP, Vibra Screw

    Stock Number: S732939

    Vibra Screw feeder, 2"diameter stainless steel screw. Complete with 19-1/2" diameterx 18" deep cylindrical carbon steel feed hopper with manual valve at bottom. Screw is driven by 1/3 HP, 1-phase, 60 cycle, 115/230V, vari-speed motor with maximum RPM 165 and minimum RPM of 16. 5. Serial number 4017.
  27. Feeder, Screw, 2", S/st, 1/3 HP, Vibra Screw

    Feeder, Screw, 2", S/st, Acrison, S/st, Dual System,

    Stock Number: C328725

    Feeder, Acrison, stainless steel construction, complete with (2) ribbon mixing chambers, Model 1057G, fed into single outlet tube, Model 301K, for mixing two different types of products/powders together. Good condition.
  28. Feeder, Screw, 2", S/st, Acrison, S/st, Dual System,

    Feeder, Screw, 2-1/2", S/st, 1/3 HP, Vibra Screw

    Stock Number: S732940

    Vibra Screw feeder, 2-1/2"diameter stainless steel screw. Complete with 19-1/2" diameter X 18" deep cylindrical carbon steel feed hopper with manual valve at bottom. Screw is driven by 1/3HP, 1-phase, 60 cycle, 115/230V, vari-speed motor, maximum RPM 165 and minimum RPM of 16.5. Serial number 3437.
  29. Feeder, Screw, 2-1/2", S/st, 1/3 HP, Vibra Screw

    Feeder, Screw, 3" x 12", S/st, 1/4 HP, Hopper

    Stock Number: S739606

    Stainless steel auger screw feeder, 3" dia x 12" long with 13" x 17" x 12" hopper. Unit has 1/4 hp, 1750 rpm, 208/220/ 440 volt 3 phase vari speed motor, unitized on carbon steel base.
  30. Feeder, Screw, 3" x 12", S/st, 1/4 HP, Hopper

    Feeder, Screw, 4" X 32", S/st, Hopper

    Stock Number: S328676

    Stainless steel screw auger feeder, unit has a 20" x 32" covered hopper over a 4" x 32" long stainless steel screw. Motor is 1/4 HP, 1725 RPM, 208-230/460V, 60Hz, 3-phase. Very good condition.
  31. Feeder, Screw, 4" X 32", S/st, Hopper

    Feeder, Screw, 4", S/st, Acrison, Model 203B

    Stock Number: Z328755

    Feeder, Acrison Model 203B-105Z-M, serial number 54754, stainless steel construction. No controls.
  32. Feeder, Screw, 4", S/st, Acrison, Model 203B

    Feeder, Screw, 4-1/2" x 18", C/st, 3/4 HP, S/st, Vibra Screw

    Stock Number: S739608

    Carbon steel vibratory screw auger feeder with 4-1/2" diameter x 18" long stainless steel screw. Unit has 48" x 16" x 40" hopper, run by 3/4 hp, 1750 rpm drive, serial number 2001256.
  33. Feeder, Screw, 4-1/2" x 18", C/st, 3/4 HP, S/st, Vibra Screw

    Feeder, Screw, 4-1/2" x 18", S/st, 3/4 HP, Hopper

    Stock Number: S739607

    Stainless steel auger screw feeder, 4-1/2" dia x 18" long with 15" x 17-1/2" x 13" hopper. Unit has cover with 7-1/2" dia inlet, General Electric 3/4 hp, 1725 rpm, 230/460 volt 3 phase vari speed motor, unitized on carbon steel base.
  34. Feeder, Screw, 4-1/2" x 18", S/st, 3/4 HP, Hopper

    Feeder, Screw, 5", S/st, Acrison, Mdl 203-130P, 1 HP,

    Stock Number: Z328775

    Acrison feeder, Model 203-130P, complete with stainless steel hopper measuring 15" x 22-1/2" x 15" with bottom mounted 5" diameter X 4-1/2' long stainless steel screw, driven by 3/4 HP, 1725 RPM DC motor. Screw feeds onto 24" wide x 36" long discharge belt conveyor, driven by 1/4 HP, 115/230V, 1800 RPM, 1/60 cycle motor thru gear box. Unitized on frame. Good condition.
  35. Feeder, Screw, 5", S/st, Acrison, Mdl 203-130P, 1 HP,

    Feeder, Screw, 6" X 10', C/st, 2 HP,

    Stock Number: S738734

    Auger feeder, screw measures 6" diameter x 10' long, carbon steel construction. Unit is driven by 2 HP, 230/460V, 1725 RPM motor thru Dodge gear reducer. Unit has 7" x 7" side bottom discharge.
  36. Feeder, Screw, 6" X 10', C/st, 2 HP,

    Feeder, Screw, 6" X 24", C/st, 18" X 20" Feed

    Stock Number: Z328675

    Feeder, auger, 6" x 24", carbon steel with 18" x 20" feed hopper, 6" x 12" discharge, 3/4 HP, 220/440V explosion proof drive, unitized.
  37. Feeder, Screw, 6" X 24", C/st, 18" X 20" Feed

    Feeder, Screw, 6" X 36", S/st, 1-1/2 HP, Mixing,

    Stock Number: S733274

    Screw feeder, measures 6" diameter x 36" long, stainless steel contact parts, complete with 18" x 13" mixing/lump breaking section, manufactured by Control & Meter, Inc. , Model number "6" screw conveyor', serial# C 2601, job# FJU 13664, Tag# M54203, new in 1995. Good condition. Does not include drive.
  38. Feeder, Screw, 6" X 36", S/st, 1-1/2 HP, Mixing,

    Feeder, Screw, 6" X 5', S/st, 1.2 HP,

    Stock Number: S733522

    Screw feeder, measures 6" diameter x 5' long, flights are welded to 4" diameter hollow shaft, stainless steel construction, includes pyramid shaped hopper feeding screw, with 17" x 40" flanged opening. Screw discharges through 7" x 7" outlet with top mounted inspection door above discharge. Screw is driven by 0.6/1.2 HP, 460V, 1/60 cycle motor thru SEW-Eurodrive gearbox and V-belt drive., rated for 16/35 ourput RPM. Very good condition.
  39. Feeder, Screw, 6" X 5', S/st, 1.2 HP,

    Feeder, Screw, 7" x 7", S/st, Incline, On Stand

    Stock Number: S738285

    Stainless steel incline screw feeder. Screw measures 7" wide 7" long with 7" x 7" discharge. Unit is on stand, portable unit needs shaft and bearing on one end.
  40. Feeder, Screw, 7" x 7", S/st, Incline, On Stand

    Feeder, Screw, 8", S/st, Acrison, 4' X 4' Mix Tub,

    Stock Number: C328680

    Acrison feeder, with mixing tub, 8" diameter x 6' long discharge screw. All stainless steel contact surfaces. Mixing tub is 4' x 4' with (2) 10" diameter x 4' long mixing barrels. The mixer in each barrel has 5" long mixing blades. Each mixing barrel is driven by 2 HP vari-speed motor. The mixing chamber is discharged by an 8" diameter x 6' long discharge screw which extends 2' past the mixing chamber. The discharge screw is driven by 3 HP vari-speed.
  41. Feeder, Screw, 8", S/st, Acrison, 4' X 4' Mix Tub,

    Feeder, Screw, 9" x 9', S/st, Incline, 1 HP

    Stock Number: S738286

    Stainless steel incline screw feeder. Screw measures 9" diameter x 9' long with 1 HP, 208-230/460V 1725 RPM gear drive. Unit is portable.
  42. Feeder, Screw, 9" x 9', S/st, Incline, 1 HP

    Feeder, Vibratory, 10" X 22", S/st, Electro-Magnet Driven,

    Stock Number: C736625

    Vibratory feeder, 10" wide x 22" long, stainless steel pan, flared side walls. Electro-magnetically driven.
  43. Feeder, Vibratory, 10" X 22", S/st, Electro-Magnet Driven,

    Feeder, Vibratory, 10" X 43", S/st,

    Stock Number: C736618

    Vibratory feeder, 10" wide x 43" long, stainless steel contacts. Includes stainless steel slotted section (sizing section), 3/4" spacing between slots. Complete with 8" x 8" undersize discharge section in bottom pan, 9" wide oversized discharge at end feeder. Includes sidewalls. Complete with Syntron magnetic drive feeder, Model BF2-AS, 115 v, 60 Hz. Unitized on stainless steel frame.
  44. Feeder, Vibratory, 10" X 43", S/st,

    Feeder, Vibratory, 12" X 108", C/st, Eriez,

    Stock Number: S741071

    Mild steel vibratory feeder, manufactured by Eriez, model number HVC 12 x 108. Feed trough measures 12" wide X 108" long with 2" X 6" rectangular discharge opening and 24" discharge height. Driven by 460V, 3/60 Hz motor. Previously used to feed Eriez magnetic separator in glass crushing operation. Very good condition.
  45. Feeder, Vibratory, 12" X 108", C/st, Eriez,

    Feeder, Vibratory, 12" X 16", Syntron, Mdl PEM 152-10, 6 CF

    Stock Number: S734944

    Syntron feeder model PEM 152-10, 12" x 16". Unit has 6 CF hopper, carbon steel, speed control box. Serial number 339982, manufactured new 4-70.
  46. Feeder, Vibratory, 12" X 16", Syntron, Mdl PEM 152-10, 6 CF

    Feeder, Vibratory, 12" X 21", S/st, Electro-Magnet Driven,

    Stock Number: C736616

    Vibratory feeder, 12" wide x 21" long flat section, leading 12" wide x 9" long declined discharge, includes 7" high flared sidewalls, electromagnetically driven.
  47. Feeder, Vibratory, 12" X 21", S/st, Electro-Magnet Driven,

    Feeder, Vibratory, 12" X 93", Vibranetics, 1 HP, Eccentric,

    Stock Number: S327478

    Feeder, vibratory, Vibranetics model VF-12-HD. Unit features stainless steel pan, 12" wide x 93" overall length to 8" diameter product discharge. Unit actuated by 1 HP eccentric drive, 220/440 volt, 870 RPM, explosion proof. Vibratory Serial number VF-4427-FF-911. Unit is in excellent condition.
  48. Feeder, Vibratory, 12" X 93", Vibranetics, 1 HP, Eccentric,

    Feeder, Vibratory, 21" x 6', Weigh, FMC, S/st, Scales, (2)

    Stock Number: S738083

    (2) FMC Foodtech Manufacturing vibratory weigh feeder, model Libra Mass Flow. Shaker measures 21" wide x 6' long x 4" tall with magnetic feeder model BF2 and (3) Achtung scales model 240, serial number 6748. Unit is 50 kg capacity, unitized on square tubing. All stainless steel contact parts with Allen-Bradley panel view plus 600. Unit portable on casters, serial numbers 1A and 1B, 230 volts, 60Hz 3-phase motor.
  49. Feeder, Vibratory, 21" x 6', Weigh, FMC, S/st, Scales, (2)

    Feeder, Vibratory, 24" x 10', S/st, Meyer, 1.5 HP,

    Stock Number: C740610

    Meyer stainless steel 24" wide X 10' long vibratory conveyor / feeder, Model# VFHVM011-3012. Driven by dual vibratory drives, 1.34 HP, 230/460V. Previously used at potato processing facility for french fries. Serial# 1970. New in 2007 Good condition.
  50. Feeder, Vibratory, 24" x 10', S/st, Meyer, 1.5 HP,

    Feeder, Vibratory, 24" X 8', S/St, Meyer, (2) 0.47 HP

    Stock Number: S738698

    Vibratory feeder, 24" wide x 8' long, manufactured by Meyer, model number VF11-24-8. All stainless steel contacts. Unit driven by two (2) 0.47 HP, 230/460V electric motors. Feed measures 6" diameter. Unit is a ceiling-mounted feeder. Complete with top covers. Serial number 1985. Unused and in excellent condition.
  51. Feeder, Vibratory, 24" X 8', S/St, Meyer, (2) 0.47 HP

    Feeder, Vibratory, 30" X 17-1/2', S/st, FMC Link-Belt,

    Stock Number: L740544

    FMC Link-Belt Vibratory conveyor/feeder, measures 30" wide X 17'6" overall bed length, with 5" high side walls. Also includes stainless steel, raised cover running length of bed. Cover has (2) 68" long x 9" high openings on one side of the cover, 43" off ground. Unit has a 37" discharge height. Rated for 501 operating speed and .75 stroke. Driven by 460 V, 3/60 Hz, 1655 RPM motor. FMC Link-Belt model number LBL SX 3005 X 17'6", Serial number 794375. New in 1995. Previously used conveying food powders for cereal processing facility. Good condition.
  52. Feeder, Vibratory, 30" X 17-1/2', S/st, FMC Link-Belt,

    Feeder, Vibratory, 30" X 64", S/st, Allen Fruit Co

    Stock Number: C736558

    Vibratory conveyor/feeder, measures 30" wide at feed section, tapering to 20" wide by 42" long flat stainless steel section, 64" long overall length, discharges through 10" wide discharge. Manufactured by Allen Fruit Company, Model number MGD46202, type C, serial number CON17343. Mounted on mild steel frame and complete with Allen magnetic drive controller, "Mag II," Model number CEA41043-1, serial number M2-0933. Appears to be in very good condition.
  53. Feeder, Vibratory, 30" X 64", S/st, Allen Fruit Co

    Feeder, Vibratory, 36" X 15', S/st, FMC Link-Belt,

    Stock Number: L740543

    FMC Link-Belt Vibratory conveyor/feeder, measures 36" wide X 14'10-1/2" overall bed length, with 7-1/2" side walls. Bed stays at one level and drops approximately 3" to lower bed for final 5' of conveyor. Also includes stainless steel cover running length of bed. Feed end includes raised cover with 34" x 9" high feed opening on side of cover, 36" off ground. Unit has a 28" discharge height. Rated for 668 operating speed and .53 stroke. Driven by 460 V, 3/60 Hz, 1655 RPM motor. FMC Link-Belt model number LBL 3607 X 14' 10-1/2", Serial number 794374. Previously used conveying food powders for cereal processing facility. Good condition.
  54. Feeder, Vibratory, 36" X 15', S/st, FMC Link-Belt,

    Feeder, Vibratory, 4' X 16', 5 HP, Scalping

    Stock Number: S740392

    Vibratory Feeder, 4' wide X 16' long. Unit is manufactured by Mill Power, serial number 89257. Feeder is a two deck type with mild steel contacts. Top deck has scalping bars on 2.5" centers. Fines drop to solid bed. Unitized on I-Beam skid. Previously used with hammer mill S740313 on construction debris. Excellent condition.
  55. Feeder, Vibratory, 4' X 16', 5 HP, Scalping

    Feeder, Vibratory, 6" X 24", S/st, Syntron, No Controller

    Stock Number: S733893

    Syntron vibratory pan feeder, 6" wide by 24" long by approximately 2" deep. Unit has stainless steel contact parts on vibratory pan and is complete with carbon steel lower frame in excellent condition. Unit is model number BF-01C driven by 115 volt DC 60Hz 23 amp drive, offered less electrical controller. Manufactured new 10/94, Serial number J58013.
  56. Feeder, Vibratory, 6" X 24", S/st, Syntron, No Controller

    Feeder, Vibratory, 6", S/st, Schenk, Accurate, 4000 Series

    Stock Number: C733210

    Schenk "Accurate" vibratory feeder, "solids flow," 4000 series, all stainless steel contacts, 6" wide vibratory feeder pan, complete with 1 cu.ft. feed hopper, electromagnetic drive, mounting brackets, etc. This design produces continuous, uniterrupted mass flow from a bin without the use of any flow aid devices. When material flows in mass flow, all the material moves whenever any is withdrawn. Unit is unused and still in original crate.
  57. Feeder, Vibratory, 6", S/st, Schenk, Accurate, 4000 Series

    Feeder, Vibratory, 7" x 16", Syntron, 5 Cu/ft Hopper, (2)

    Stock Number: S738064

    (2) Syntron vibratroy feeder, complete with 5 cubic foot carbon steel hopper, 21" x 21" x 19" deep. Feeder measures 7" wide x 16" long, 115 volt, mounted on frame, complete with controller. Feeder is model SCR-18.
  58. Feeder, Vibratory, 7" x 16", Syntron, 5 Cu/ft Hopper, (2)

    Feeder, Vibratory, 7' X 11', C/st, General Kinematics, (3)

    Stock Number: D735417

    (3) Vibratory feeder, 7' wide x 11' long, manufactured by General Kinematics, "Para Mount II," Model# ARC 84X11. Complete with feed hoppers, hangers and anti-flush gates. Reported to be in good condition.
  59. Feeder, Vibratory, 7' X 11', C/st, General Kinematics, (3)

    Feeder, Vibratory, 8" X 40", C/st, Syntron, Magnetic,

    Stock Number: S738428

    Syntron magnetic vibratory feeder, carbon steel construction. Bed measures 8" wide x 40" long, manufactured by Syntron, Model number BFOK, rated for 115V. Serial number 79544.
  60. Feeder, Vibratory, 8" X 40", C/st, Syntron, Magnetic,

    Feeder, Vibratory, 8" X 42", S/st, Electro-Magnet Driven, (2)

    Stock Number: C736615

    (2) Vibratory feeder, 8" wide x 42" long, stainless steel pan, electro-magnetically driven.
  61. Feeder, Vibratory, 8" X 42", S/st, Electro-Magnet Driven, (2)

    Feeder, Vibratory, Pan, Syntron, 14" x 27", S/st

    Stock Number: C733242

    Syntron Model F212-B stainless steel vibratory pan feeder. Unit measures 14" w x 27" l, is 115V, with stainless steel feed conveyor. Mfg 8/1993, serial number 766379. Less controller.
  62. Feeder, Vibratory, Pan, Syntron, 14" x 27", S/st

    Feeder, Vibratory, Syntron, 11" X 30", S/st, (2)

    Stock Number: S327493

    (2) Vibrating feeder, Syntron model F152A, 11" wide x 30" long x 4" deep with stainless steel contacts. Feeder has driving magnet mounted above, less controller. 115V/25 Amps. S/N: G69629 & G69625.
  63. Feeder, Vibratory, Syntron, 11" X 30", S/st, (2)

    Feeder, Weigh, Atoma, 1-10 Kg Cap, S/st, Single Head

    Stock Number: C328649

    Feeder, scale, vibratory, single head, 1 to 10 kg, Atoma type 234A, new 1981, serial number 10-1337. Unit features stainless steel vibratory pan feeders, 11" w x 24" feeding tube, 12" x 12" scale hopper with automatic discharge. Unit mounted on adjustable legs, complete with control panel, counter, frequency controllers, etc. Feeder last used doing bulk bags of tortilla chips.
  64. Feeder, Weigh, Atoma, 1-10 Kg Cap, S/st, Single Head

    Feeder, Weigh, TecWeigh, S/st, Volumetric, Hopper

    Stock Number: C738741

    Tecweigh bulk weigh feeder, includes 36" diameter x 5' high stainless steel hopper. Hopper is agitated and feeds to 2" diameter stainless steel auger driven by 1 HP motor. Hopper and auger are mounted on load cells and frame includes mild steel wheels to ride on rail. Includes top mounted fike pressure relief valve. Good condition.
  65. Feeder, Weigh, TecWeigh, S/st, Volumetric, Hopper

    Feeder, Weigh, Tridyne, Flex, Mdl 6504-A, 100 Grams

    Stock Number: S328648

    Weigh feeder, Tridyne, Flex Weigh model 6504-A, capacity of 100 grams, Serial number 1507. Unit features stainless steel hopper, 12" x 20" to vibratory feeders 4" wide to scale chute with automatic release.

65 Item(s)

per page

Set Descending Direction

Please wait...