+1-415-467-3400

Extruder

18 Item(s)

per page

Set Ascending Direction
  1. Extruder, 12" Dia., Christian, S/st, Twin Screw, 7-1/2 HP,

    Stock Number: S321650

    Extruder/mixer twin screw, stainless steel, 12" diameter x 5'6" long screws, jacketed mixing section measuring 4'6" long, screws are driven with 7-1/2 HP 220/440 volt motor through vari drive and gear reducer. Heavy duty design, manufactured by Christian Engineering, last used on clays and mud. No nameplate data available.
  2. Extruder, 12" Dia., Christian, S/st, Twin Screw, 7-1/2 HP,

    Extruder, 10" Dia., Fitzpatrick, Malaxator, S/st, 10" X 6.5'

    Stock Number: Z320055

    Fitzpatrick Malaxator, mixer-extruder. 10" diameter X 6-1/2' long sanitary stainless barrel with split opening for cleaning. Model L-800, serial number 121. Last used on continuous mixing of bread dough in a crouton plant. Has capability of direct steam injection and liquid addition. Less main motor and screw feeder, mounted on polished stainless stand.
  3. Extruder, 10" Dia., Fitzpatrick, Malaxator, S/st, 10" X 6.5'

    Extruder, 8" Dia., Enterprise, Meat, 30 HP, 1/16" Dies,

    Stock Number: S320050

    Enterprise meat extruder, with 8" diameter feed screw and die. (2) sets of dies available - (1) 1/16" diameter and (1) 1/4" diameter. Machine has a type a feed screw. Serial number 46956 and machine number 1266. Extruder is driven by 30 HP Westinghouse 220/440 V, 885 RPM, 78/39 Amps, 60-cycle,3-phase motor and roller chain drive. Feed screw has 32" diameter feed hopper mounted above.
  4. Extruder, 8" Dia., Enterprise, Meat, 30 HP, 1/16" Dies,

    Extruder, 6" Dia., Fitzpatrick, Malaxator, S/st, 6" X 3.5'

    Stock Number: S321690

    Fitzpatrick Malaxator, mixer-extruder, 6" diameter x 3-1/2' long sanitary stainless steel barrel with split opening for cleaning. Last used on continuous mixing of bread dough in a crouton plant. Has capability of direct steam injection and liquid addition. Mounted on polished steel stand. No drive motor or feed screw.
  5. Extruder, 6" Dia., Fitzpatrick, Malaxator, S/st, 6" X 3.5'

    Extruder, Mixer, 6", S/st, 10 HP, Pasta

    Stock Number: C736485

    Pasta mixer/ extruder, stainless steel, complete with 3' x 3' x24" deep tapered bottom hopper with single wand agitator and 6" diameter twin lead screw discharge. Provisions for addition of die plate at screw discharge. Unit is mounted on frame, complete with 10 HP main motor drive through reducer for screw discharge and 3 HP drive for single wand mixer.
  6. Extruder, Mixer, 6", S/st, 10 HP, Pasta

    Extruder, Insta-Pro, 75 HP, Mdl 2000

    Stock Number: D740545

    Extruder, Insta-Pro, model number 2000. Unit is a single barrel design driven by 75 HP motor. Minimum/maximum capacity of 1,300 to 3,840 pounds per hour depending on product. Unit has a capacity of approximately 2,000 pounds per hour on full-fat soy. Includes pyramid shaped feed hopper. Mounted on mild steel platform. Good condition.
  7. Extruder, Insta-Pro, 75 HP, Mdl 2000

    Mixer, Continuous, Extruder, Baker Perkins, MP, 5", 316 S/st

    Stock Number: S534420

    Mixer, Baker Perkins, model MP, multi purpose, twin screw, 5" diameter screws x 36" long, with all edges of wetted parts being type 316 stainless steel, the remainder is carbon steel. The units are jacketed for 150 PSI @ 338 degrees, equipped with 15 HP motor to Reeves vari-speed drive with a final output of 63.3 RPM up to 190 RPM. Serial number 53783 (9/64). Spare parts include mixing screws, lobes, shafts, and bearings. Good condition.
  8. Mixer, Continuous, Extruder, Baker Perkins, MP, 5", 316 S/st

    Extruder, Extru-Tech, Mdl E525, Jkt, 100 HP, Snacks

    Stock Number: D740730

    Extru-Tech Model number E525 snack food extruder. Complete with hopper with feeder, stainless steel base and hopper, jacketed screw section, cut off knives with extra dies. Driven by 100 HP, 440V, 3/60Hz motor. (Similar to Wenger X25). All mild steel parts are painted. Last used on expanded snack foods. Excellent condition.
  9. Extruder, Extru-Tech, Mdl E525, Jkt, 100 HP, Snacks

    Extruder, 4-1/2" Dia, Davis Standard, 24:1, 200 HP

    Stock Number: A740570

    Extruder, 4-1/2" diameter, manufactured by Davis Standard, model number 450S D8770. Unit is a non-vented type extruder. Driven by 200 HP main motor. Previously used in plastics operation. Includes control panel. Good condition.
  10. Extruder, 4-1/2" Dia, Davis Standard, 24:1, 200 HP

    Extruder, 10" Dia, Bonnot, 304 S/st, 10 HP,

    Stock Number: S741078

    Bonnot extruder, 304 stainless steel, jacketed, trough measures 24" x 24" x 32" deep, has 4-1/2" diameter shaft, approximately 15-1/2 diameter x 40" long. Unit is driven by 10 Hp 285/76 volt, 3000/600 rpm 2 speed motor thru gearbox, with gear ratio of 38:1. Unit has 10-1/2" diameter discharge, is mounted on carbon steel base. Unit has de-airing feed chamber. Last used on Masa for corn chips.
  11. Extruder, 10" Dia, Bonnot, 304 S/st, 10 HP,

    Extruder, Sterling, 3-1/2", 21:1 L/d, Plastic, 50 HP,

    Stock Number: C323075

    Extruder, sterling, 3-1/2", with 21:1 l/d ratio, screw RPM IS 120, unit electrically heated with 50 HP main motor to 230/440Volt. Unit bears serial number 35247. Fair condition.
  12. Extruder, Sterling, 3-1/2", 21:1 L/d, Plastic, 50 HP,

    Extruder, 3" Dia., Starkey, Mdl 851, Pugmill, Cutter

    Stock Number: C740516

    Starkey Machinery Pugmill/Extruder and Automatic Wire Cutter, Model 851. Includes 10 1/8" x 9 1/2" hopper which self feeds 1 cubic foot batches using twin hopper shafts. Features 4" (100mm) pugmill auger which tapers to 3" (75mm), powered by 1.5 HP pugmill motor. Material is extruded by 2 HP extruder motor. Vacuum chamber measures 4" (100mm) diameter and includes slotted plate and series of shredders. Extrusion auger measures 3" (75mm) diameter. All stainless steel shafts, augers, paddles, shredders, barrels, and vacuum chamber. Unit also features de-airing chamber, data acquisition package with color touchscreen display, and pneumatic wire cutter. 240 V, 60Hz, 3 Phase.
  13. Extruder, 3" Dia., Starkey, Mdl 851, Pugmill, Cutter

    Extruder, 2.5" dia, NRM, Mdl 2-5-24.1, 40 HP, Plastics,

    Stock Number: S739219

    NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat with hopper. Unit is driven by 40 hp, 500 volt, 1725/2100 rpm motor. Unit includes electrical panel, serial number 18932.
  14. Extruder, 2.5" dia, NRM, Mdl 2-5-24.1, 40 HP, Plastics,

    Extruder, 2-1/4" Dia., Bonnot, 2-1/4" X 78", S/st, 20 HP,

    Stock Number: Z324555

    Bonnot extruder 2-1/4" x 78" stainless steel and complete with 20 HP 1750 RPM, 500Volt DC motor through Reliance vari drive through Dodge TM gear reducer. Barrel is jacketed full length and complete with steam manifold for steam connection every 10". Last used as R&D extruder in food plant as a cooking extruder.
  15. Extruder, 2-1/4" Dia., Bonnot, 2-1/4" X 78", S/st, 20 HP,

    Mixer, Vertical, Vacuum, S/st, Jkt, Cone, Extruder,

    Stock Number: S734531

    Vertical cone mixer, lab size, stainless steel construction, includes (2) vertically mounted sigma style dispersion blades, mounted in cone shaped mixing chamber. Blades extrude product through discharge at bottom of cone. Chamber is jacketed and vacuum rated with top sight glass. Blades are driven by 1/2 HP Reeves vari-drive, size III-IV1M-18, rated for 2160 max RPM and 216 min RPM. Appears to be capable of running inert gas blanket. Very good condition.
  16. Mixer, Vertical, Vacuum, S/st, Jkt, Cone, Extruder,

    Extruder, Belt Puller, C/st, 1 HP, Right to Left

    Stock Number: S739221

    Extrusion belt puller, carbon steel. Unit is a right to left unit with the belt size of 4" x 30" and digital motor speed control. Unit is driven by 1 hp, 180/200 volt, 1750 rpm. No nameplate data available.
  17. Extruder, Belt Puller, C/st, 1 HP, Right to Left

    Extruder, Vemag, Mdl R500, S/st Hopper, 6.5 HP, Vacuum,

    Stock Number: L740908

    Vemag model R500 "Robot 500" vacuum extruder. All stainless steel construction. Complete with 110 liter (200 lb.) stainless steel round hopper, dual screws, vacuum pump, etc. Fill rate is adjustable up to 5,500 lbs/hr, 5 - 30,000 adjustable portion weights in increments of 0.1 g - 1 g, with portioning speeds up to 450 PPM. Driven by 4.9 kW motor, 220/440V / 575V. Complete with Vemag PC 878 controller. Equipment is in very good condition.
  18. Extruder, Vemag, Mdl R500, S/st Hopper, 6.5 HP, Vacuum,

    Extruder, 4-1/2" Dia, Bonnot, 304 S/st, 7.5 HP,

    Stock Number: S741087

    Bonnot Extruder, all 304 stainless steel contacts. Includes jacketed trough measuring 34" long X 15-1/2" wide X 20" deep. Unit has 4-1/2" diameter X 54" long shaft. Driven by 7.5 HP, 385/76 V, 3000/600 RPM, 3/60Hz motor though gearbox with output ratio of 37.8:1. Includes 12-1/2" diameter discharge. Mounted on mild steel base with casters.

18 Item(s)

per page

Set Ascending Direction

Please wait...