+1-415-467-3400

Elevator

9 Item(s)

per page

Set Ascending Direction
  1. Elevator, Bucket, 60', 25 HP, 100 Tons, Sand

    Stock Number: C739791

    Bucket elevator, rated for 100 tons per hour on sand, 60' high discharge. Steel buckets on belt. Includes steel buckets with hard faced leading edge, measuring 16" x 7" x 8" inches deep. Complete with 25 HP, 220/440 volt motor and 56" X 24" steel casing. Manufactured by Screw Conveyor Corp, New in 2007.
  2. Elevator, Bucket, 60', 25 HP, 100 Tons, Sand

    Elevator, Belt, 16'8", C/st, Rubber, Rappart, Mdl FLX3218,

    Stock Number: C739208

    Rappart elevator, discharge height is 16'8" high. Complete with heavy duty cupped type, rubber belt comveyor, with 9" high cleats & side walls, 67 cleats on 50' long belt. Belt is rated for 282.6 ft/minute, approximately 31.5 cu. ft./min. Complete with drive thru gear reducer and v-belt assembly. Only has 100 hours use. Very good condition.
  3. Elevator, Belt, 16'8", C/st, Rubber, Rappart, Mdl FLX3218,

    Elevator, Bucket, 16', C/st, Z-frame, Plastic

    Stock Number: S735108

    Bucket elevator, Z-frame, 16' discharge height, 24" wide buckets, 3' long feed section, 4' long discharge section, mild steel frame with top mounted drive (less motor).
  4. Elevator, Bucket, 16', C/st, Z-frame, Plastic

    Elevator, Bucket, 12', S/st, Bulk-el, S/st Buckets,

    Stock Number: S304312

    Bucket elevator, Buck-El Inc. Stainless steel housing, 12' centers, 6" x 13-1/2" casing. 3" x 1-1/2" stainless steel buckets spaced 12" apart on 3-1/2" wide belt. Driven by 1 HP electric motor. Serial number CA3959-1.
  5. Elevator, Bucket, 12', S/st, Bulk-el, S/st Buckets,

    Elevator, Bucket, 12', SMC, S/st, Z-Frame,

    Stock Number: A739466

    SMC Z-frame bucket elevator, Smalley Manufacturing Co., approximately 12' discharge height, stainless steel construction with plastic buckets. Includes 6' infeed section, 9' long vertical section and 6' dishcarge section. Buckets included. Good condition.
  6. Elevator, Bucket, 12', SMC, S/st, Z-Frame,

    Elevator, Bucket, 10', C/st, Universal, 0.75 HP

    Stock Number: C739782

    Universal bucket elevator, carbon steel construction. Unit has overlapping tubular bucket type, buckets measure 5-1/2" x 4" x 3-1/2" deep, 32" feed, 10'4" discharge height of 10'4". Overall height is 12' Unit is driven by 0.75 hp, 208/230/460 volt 1725 rpm motor thru gearbox. Good working condition.
  7. Elevator, Bucket, 10', C/st, Universal, 0.75 HP

    Elevator, Bucket, 11', Tubular, Discs, Floveyor

    Stock Number: A740314

    Unused Floveyor bucket elevator, model # F3-11. 11' discharge height. All stainless steel contact parts with powder coated carbon steel frame. Unit has 3" diameter tubes and polypropylene discs mounted on a stainless steel wire rope. Includes feed chute with baffle and 5" square inlet. Discharge measures 7" X 12" with 1' long flex socks and clamps. Driven by 1HP, 230/460V, 3/60Hz motor. Unit is still in original packaging.
  8. Elevator, Bucket, 11', Tubular, Discs, Floveyor

    Elevator, Bucket, 6" x 4", C/st, Universal

    Stock Number: C736749

    Universal bucket elevator. Buckets measure 6"l x 4"w x 4" deep, infeed is 28" x 8", discharge is 6". Unit measures 91" from ground. Has 13" buckets .
  9. Elevator, Bucket, 6" x 4", C/st, Universal

    Elevator, Bucket, 6', Tubular, Discs, Floveyor

    Stock Number: A740315

    Unused Floveyor bucket elevator, model # F2-6. 6' discharge height. All stainless steel contact parts with powder coated carbon steel frame. Unit has 2" diameter tubes and polypropylene discs mounted on a stainless steel wire rope. Includes feed chute with baffle. Discharge measures 5" diameter with 1' long flex socks and clamps. Driven by 3/4HP, 230/460V, 3/60Hz motor. Unit is still in original packaging.

9 Item(s)

per page

Set Ascending Direction

Please wait...