15 Item(s)

per page

Set Descending Direction
  1. C730147

    Dicer, Cutter, Carruthers, Mdl MS13001, S/st,

    Stock Number: C730147

    Carruthers dicers, Model MS13001. All stainless steel contacts, high volume slicer/dicer for fresh, raw or pre-cooked meats as well as many other products at a rate of 20,000 lbs/ her depending on product/cut. 30" (750mm) wide, continuous flow conveyor, unequalled flexibility cut from 1/4" (6mm) to over 6" (152mm) with one machine. Processing temperatures from 30 deg to 212 deg. F. Accurately strips, steaks, cubes and dices the most delicate products as well as the toughest.
  2. C737795_A

    Dicer, Hallde, Table-top, Mdl RG300, 1 HP,

    Stock Number: C737795

    Dicer, table top, manufactured by Hallde, Model RG-300. Unit has 7" x 3" feed with pestle, product fed through blades. Last dicing frozen peaches, approx. 1/4" dices. Unit is 110V,.75 kW 50/60 Hz. 1500/1800 RPM. Serial number 300-1168. Good condition.
  3. A739920_A

    Dicer, Holac, S/st, Meat Dicer, Hopper, 2,000 lbs/hr, (3)

    Stock Number: A739920

    (3) Holac meat dicers, Automatic meat dicer with 150 lb. intake hopper, side compression feed chamber, single vertical blade and two grid blades. Rated for 220 Volt, 3 phase electrical. Rated for approximately 2,000 pounds per hour. Set up for 1/2" x 1/2" grids. Dicing grids available - 1" x 1", 3/4" x 3/4" & 3/8" x 3/8".
  4. C736234

    Dicer, Slicer, Dixie, Uni-slicer, Mdl SL-450, S/st

    Stock Number: C736234

    Slicer, Dixie uni-slicer, Model# SL-450, stainless steel construction, set up for high capacity, high performance slicing and portioning control. Complete with (3) 420mm diameter slicing blades, rated between 120 - 600 slices/minute. Capable of 150mm x 240mm max product dimensions, 800mm max product length & 0.4 - 50mm slice thickness. Complete with portion conveyor, PC control system, 100 program memory, (1) product guide and (2) hold downs, transformer 200-400/3-60, leg extensions, etc. Reported to be in excellent condition.
  5. A736236

    Dicer, Slicer, Nanashimaya, Meat, Strip Cutter, Urschel, Mdl M

    Stock Number: A736236

    Meat slicer/strip cutter, manufactured by Nanashimaya, previously used to cut strips of chicken and fish, stainless steel construction. Similar to an Urschel Model M slicer. New in 2002. Excellent condition.
  6. D739475

    Dicer, Urschel, Comitrol, 3600, S/st, 10 HP,

    Stock Number: D739475

    Urschel Model 3600 Comitrol, driven by 10 HP, 440 volt, 3500 RPM motor. Includes auger feed and cutting head (part# 2-B-015025). Has been reconditioned and is in very good condition.
  7. Dicer, Urschel, Comitrol, Mdl 3600, 10 HP, S/st,

    Dicer, Urschel, Comitrol, Mdl 3600, 10 HP, S/st,

    Stock Number: Z261364

    Dicer, Urschel, Comitrol, Model 3600, stainless steel, with 10 HP 3/60/220/440/3490 RPM direct drive motor. Serial number 260. Unit is missing cutting head, motor needs work.
  8. Dicer, Urschel, Comitrol, Mdl Mg, 15 HP Belt Drv, Standard

    Dicer, Urschel, Comitrol, Mdl Mg, 15 HP Belt Drv, Standard

    Stock Number: Z261361

    Urschel Comitrol dicer Comitrol Model MG, 15 HP belt drive with standard cutting head.
  9. Dicer, Urschel, Comitrol, Mdl Mg, 15 HP, 220/440 Volt

    Dicer, Urschel, Comitrol, Mdl Mg, 15 HP, 220/440 Volt

    Stock Number: Z261363

    Dicer, Urschel, Comitrol, Model MG, with 15 HP 220/440V belt drive and on stainless steel stand.
  10. Dicer, Urschel, Comitrol, Mdl MG, S/st, 30 HP,

    Dicer, Urschel, Comitrol, Mdl MG, S/st, 30 HP,

    Stock Number: C261360

    Dicer, Urschel, Comitrol, Model MG, stainless steel, with 30 HP, 230/460V 3600 RPM drive motor. Unitized on stainless steel stand with electrical box. Serial number 1267.
  11. S736650

    Dicer, Urschel, Mdl F, S/st,

    Stock Number: S736650

    Dicer, manufactured by Urschel, model F, dicer, bronze case and bronze impeller, includes feed chute, discharge chute, control box, circular knife assembly, and crosscut assembly, previously used in fruit dicing operation.
  12. A739942_A

    Dicer, Urschel, Mdl H, S/st, 2 HP, 1" x 1" Cuts,

    Stock Number: A739942

    Used Urschel Model H dicer, stainless steel construction, includes feed hopper, crosscut & circular knife assemblies, discharge chute, etc. Complete with 2 HP, 208-230/460V 3/60Hz. motor with vari-speed controller. Set up to cut 1" x 1" cuts on apples. Good condition.
  13. S734867

    Dicer, Urschel, Mdl HX-A, S/st,

    Stock Number: S734867

    Dicer, manufactured by Urschel, model HX-A, stainless steel construction, mobile dicer, Serial# 146. Includes crosscut assembly with (9) blades set up for 13/16" cut and circular blade assembly with 6 blades for 1-1/4" cut. Good condition.
  14. S739000 (1)

    Dicer, Urschel, Mdl RA, S/st, 3/8" x 1/4", 5 HP

    Stock Number: S739000

    Urschel Model RA dicer, cuts in three dimensions. High speed centrifugal slicer for thickness adjustable by screw adjustment. Second cut is revolving corrugated feed drum & opposing feed spindle knives for positive feed into circular knives. Third cut is crosscut assembly to produce cubes or rectangular pieces. Dicer includes 3/8" crosscut assembly x 1/4" circular knives. Complete with 5 HP , 208-230/460 V motor. Urschel serial# 1061. Good condition.
  15. S739628_A

    Slicer, Grote, Mdl S/A2225, S/st, Applicator

    Stock Number: S739628

    Grote model S/A 2225 stainless steel industrial slicer for maximum product size of 2" x 30". Unit includes 37" wide x 9'6" long stacking conveyor, 230 volt, 3 phase.

15 Item(s)

per page

Set Descending Direction

Please wait...