Stock Number: C735206(4) Crystallizer systems, designed for crystallization of tartaric acid, batch-type, 2,000 gallons per 4-6 hours. Complete with crystallizer body constructed of sanicro 28 alloy, rated for full vac internal, measures 6' diameter X 8' straight side, dished top & bottom, (2) sets of internal coils, center top agitation with paddle agitator, driven by approx. 2 HP motor thru gear box, 6" center bottom outlet, 2" feed inlet with manual valve, 18" top manway & 16" top vent, each have a steam jet vacuum ejector. Gases escape through vent opening to (2) elevated evaporator bodies measuring approx 36" diameter X 6' high each. Second body introduces water through plates to create suction and condense gases. Also includes vacuum pump. Still installed and appear to be in good condition. llizer was 15-18 % tartaric acid. Slurry coming out at end of process was 65-70% tartaric acid. By adjusting the amount of time of evaporation you can use lower or higher initial concentrations and obtain lower o
Stock Number: C257216Crystallizer, 8,000 gallon capacity, manufactured by Struthers Wells, "Krystal", cooling type crystallizer. Constructed of 316 ELC stainless steel, design pressure -15 PSI external full vac @ 200 deg. F. and 20 PSI internal @ 250 deg. F. Suspension chamber measures 10' outside diameter x 9' straight side, 6' cone bottom. 38" center top nozzle, 20" top side manway, 24" side manway, top head thickness 3/8" and bottom head and shell thickness of 5/16". Complete with Lightnin agitator (coil has been removed). Agitator driven by 7.5 HP motor, 67 output RPM on shaft, shaft includes (2) 3-blade paddles. Good condition.