+1-415-467-3400

Cooling Tower

9 Item(s)

per page

Set Ascending Direction
  1. Refrig, Cooling Tower, 21,433 SF, S/st, Niagara,

    Stock Number: S734198

    Cooling tower, heat exchanger, closed loop, 21,433 sq. ft., of 1.05" OD X .049, 304 stainless steel tube. Manufactured by Niagara Blower, model # 44029-SL. Two unit design, last used on cooling demineralized water, (4) fans, 12' diameter with 75 HP each, 4 tube bundles, 564 tubes x 35' long, cooled 3,800 gallons per minute of water from 146 deg. F. to 85 deg. F. at 50 PSI. Excellent condition.
  2. Refrig, Cooling Tower, 21,433 SF, S/st, Niagara,

    Refrig, Cooling Tower, 1600 Ton, BAC, (6)

    Stock Number: S737933

    (6) Cooling tower, manufactured by B.A.C., nominal 1600 ton capacity, stainless pan. Model number 3860-2WR, series 3000, two stacked modules to make up each cell. Rated at 4600 GPM of water from 95 deg. F. to 80 deg. F @ 69.13 entering wet bulb. Fan with (2) 60 HP motors, 230/460V. New in 1997. Reportedly used two years only. BAC #97210231 thru 97210271. Current model #'s 387C2. Current replacement cost: $180,457. Some railings, catwalks, etc. On skids, ready to load.
  3. Refrig, Cooling Tower, 1600 Ton, BAC, (6)

    Refrig, Cooling Tower, 350 Ton, Marley, 50 HP, (3)

    Stock Number: D735748

    (3) Cooling tower, rated for approximately 900 ton cooling capacity each, manufactured by Marley, "nc series cooling tower. " Model# NC9142CF, new in 1996, includes stainless steel bottom. Reported to be in very good condition.
  4. Refrig, Cooling Tower, 350 Ton, Marley, 50 HP, (3)

    Refrig, Cooling Tower, 189 Ton, BAC, 2 Pc Unit, (2)

    Stock Number: S734494

    (2) Aluminum cooling tower, manufactured by Baltimore Air Coil, BAC, 2 piece unit, model FXV-L0660, belt #'s 2B115 & 2N103. Unit has cell "A" and cell "B" for stacking. Top cell includes (3) ventilation fans, bottom cell includes louvres and 2 HP centrifugal pump. Rated for a nominal capacity of 189 ton cooling capacity. New in 1996. Serial #'s 96201221 & 96201222.
  5. Refrig, Cooling Tower, 189 Ton, BAC, 2 Pc Unit, (2)

    Refrig, Cooling Tower, 60 Ton, Evapco, Mdl ICT 4-66

    Stock Number: S738850

    Evapco 60 ton cooling tower, Model ICT 4-66, 3" diameter water inlet/outlet, 2" drain, 2" overflow. Includes fan, driven by 3 HP, 1160 RPM, 208-230/460V, 3/60Hz motor. Cooling tower is galvanized steel. Serial number 969017.
  6. Refrig, Cooling Tower, 60 Ton, Evapco, Mdl ICT 4-66

    Refrig, Cooling Tower, 60 Ton, Evapco, Mdl LSTA461,

    Stock Number: S739667

    Evapco 60 ton cooling tower, model number LSTA461, belt number B77B8. Unit has a 3" diameter water inlet/outlet, 2" drain, and 2" overflow. Includes Dolphin Pulsed power water treatment system with controls. Unit is galvanized steel. New in 2001, serial number W016719. Good condition.
  7. Refrig, Cooling Tower, 60 Ton, Evapco, Mdl LSTA461,

    Refrig, Cooling Tower, 40 Ton, RSD, Frp, Mdl RSD-040, 1 HP

    Stock Number: S738641

    RSD Industries fiberglass cooling tower, 40 ton capacity, model RSD-040, Serial number 04296. Unit is 1 HP, 230/460 V, 3 ph, 1140 RPM. Has fluid connections, water inlet is 3", outlet 3", water makeup 3/4", overflow 1", drain 1-1/2". Nominal water flow is 120 GPM, fan CFM 9887.
  8. Refrig, Cooling Tower, 40 Ton, RSD, Frp, Mdl RSD-040, 1 HP

    Refrig, Cooling Tower, Air Cooled, Carrier, 3 HP,

    Stock Number: S733229

    Cooling tower, manufactured by Carrier, model 40RR-024530-1, complete with 3 HP, 230/460V, 3/60Hz cycle motor. Rated for 410 max PSI, 2.24 kW out, 10.1/5. 0 FLA, 2827kpa, serial #Y981532.
  9. Refrig, Cooling Tower, Air Cooled, Carrier, 3 HP,

    Refrig, Cooling Tower, Evapco, Mdl LST 363, 5 HP

    Stock Number: S738851

    Evapco cooling tower, Model LST 363, 4" diameter water inlet/outlet, 2" drain, 2" overflow. Includes twin fans, driven by 5 HP, 1750 RPM, 208-230/460V, 3/60Hz motor. Cooling tower is galvanized steel. Serial number 851819.

9 Item(s)

per page

Set Ascending Direction

Please wait...