+1-415-467-3400

Cooker

13 Item(s)

per page

Set Ascending Direction
  1. Cooker, Rotary, 41" x 6', S/st, Jkt, 150 PSI, Ras Process

    Stock Number: S734951

    RAS Process Equipment cooker. Chamber measures 41" x 6' long with rotating paddles. Unit is double jacketed, rated at 25 PSI @ 260 deg. F. Cooker is 5 HP, 1725 RPM, 230/460Vs, dodge reducer has 25.54:1 ratio, has 1/4 HP hydraulic pump for tilt on one end, side bottom outlet, 11". Has 4" x 6" channel frame, stainless steel contact parts, manufactured in 1992, serial number 920767, national board number 354.
  2. Cooker, Rotary, 41" x 6', S/st, Jkt, 150 PSI, Ras Process

    Cooker, Braiser, 40 Gallon, S/st, Cleveland, Gas,

    Stock Number: C732079

    Braising pan, Cleveland Range Co, 40 gallon braiser, stainless steel, Model SGL-OX, natural gas fired, less actuator, has hinged cover, measures 45" x 28" x 9" deep.
  3. Cooker, Braiser, 40 Gallon, S/st, Cleveland, Gas,

    Cooker, Belt, 62" X 51', S/st, Heat And Control, Steam

    Stock Number: C104960

    Cooker, heat and control, cooker, 62" x 51', stainless steel, continuous belt type, 62" wide x 37'6" long compression belt, stainless steel covers & frame, 3 HP variable speed belt drive, 4' belt discharge height, stainless steel covers over 40' of unit, includes 675 sq.ft. Stainless steel heat exchanger, 5/8" diameter tubes, 23' long, 180 tubes, two pass, carbon steel shell, stainless steel tubes. (See Item# S422097). Includes mechanical lift system for hood.
  4. Cooker, Belt, 62" X 51', S/st, Heat And Control, Steam

    Cooker, Braiser, 20 Gallon, S/st, Electric,

    Stock Number: S731667

    Cooker, braising pan, stainless steel, measuring 24" wide x 30" x 6-1/2" deep. Unit is a model TS-236-T6. Complete with hinged lid and (2) slightly raised portions on lid, control for temperature. Tilt controlled by hand wheel and has a pouring lip. Serial number 721282.
  5. Cooker, Braiser, 20 Gallon, S/st, Electric,

    Cooker, FMC, Cooker, Rotary, Atmospheric, 300 X 407 Cans,

    Stock Number: D736755

    Cooker, FMC, 112", rotary, atmospheric, 300 x 407 cans, 8,366 can capacity, 94 step reel, Stainless steel tees and angles, free roller infeed, extractor discharge, with drive, unit has some external shell corrosion by the infeed and discharge, fair condition.
  6. Cooker, FMC, Cooker, Rotary, Atmospheric, 300 X 407 Cans,

    Cooker, 250 Gallon, Vertical, S/st, Jkt, Agit,

    Stock Number: C732516

    Cooker, 250 gallon, manufactured in Taiwan, pressure or vacuum cooker with water or low pressure steam jacket. Unit has 5 HP V-belt drive, horizontal agitator, unit measures 36" diameter x 5' vertical stainless steel chamber with quick opening 30" diameter top lid and 4" diameter center bottom outlet. Mounted on 4 pipe legs. Mixer is 10' oal height. No nameplate data available. Mixer has hi polish inside and is in good condition.
  7. Cooker, 250 Gallon, Vertical, S/st, Jkt, Agit,

    Cooker, 80 Gallon, S/st, Rotating Coil, Hot Break Tank

    Stock Number: S735563

    Process systems Inc. rotating coil holoflite, horizontal hot break tank. T735563ank size is 22" wide x 4' long x 3' deep, approx 11 cubic feet, 304 stainless steel unit has rotary joints on both ends. Unit is 1.5 HP, 230/460V, 660 RPM to torque reducer, 46.32:1 ratio, on stainless steel frame, New in 6/92, serial number 10420-1.
  8. Cooker, 80 Gallon, S/st, Rotating Coil, Hot Break Tank

    Cooker, 310 Gallon, S/st, Rotating Coil, Hot Break Tank

    Stock Number: S735564

    Process Systems Inc. rotation coil as agitation holoflite, 300-Gallon horizontal hot break tank. Tank size is 2' x 9' x 28", approximately 42 cubic feet, 304 stainless steel unit less rotary joints on both ends. Unit is hydraulic drive, on stainless steel frame, New in June 1989, serial number 6138.
  9. Cooker, 310 Gallon, S/st, Rotating Coil, Hot Break Tank

    Cooker, Immersion, 30" X 34" X 12", S/st,

    Stock Number: S737356

    Immersion cooker/heater, heating section measures 30" x 34" x 12" deep, includes internal conveyor with 1/4" diameter rods on 3/4" spacing, can be raised and lowered, stainless steel frame. Complete with controls for heating. Stave conveyor, pass through, immersion, preheater & drip off. model number AT10E, serial number 960055, 3-phase, 440 volt, 60 cycle. Previously used at salame manufacturing facility.
  10. Cooker, Immersion, 30" X 34" X 12", S/st,

    Cooker, Braiser, 30 Gallon, S/st, Hobart, Electric

    Stock Number: A737592

    Cooker, braising pan, manufactured by Hobart, Model number LOP18, chamber measures 22" x 22" x 7" deep, approx. 30 gallon capacity, electrically heated. Good condition.
  11. Cooker, Braiser, 30 Gallon, S/st, Hobart, Electric

    Cooker, 400 Gallon, Horizontal, S/St, Interior Steam Coil,

    Stock Number: S738686

    Cooker, steam mix kettle, 400 gallon capacity, horizontal trough, stainless steel construction, trough measures 67-3/4" long x 42" wide x 42-1/2" deep, single shell trough, includes interior heating/cooling coil, 3" diameter coil, with stainless steel paddles for agitation, 4" diameter. Center shaft, 4" end bottom discharge, with (2) tri-clamp ports on each side of outlet. Complete with (2) hinged lids, (8) top openings - 1", (2) 1-1/2", (4) 2" & 2-1/2" openings. Previously heated with steam to process jams and jellies. Rotary coils are hydraulically driven (less power pack).
  12. Cooker, 400 Gallon, Horizontal, S/St, Interior Steam Coil,

    Cooker, 100 Gallon, Hot Break Tank, S/St, Process Sys,

    Stock Number: L738638

    Hot break tank, approximately 100 gallon, stainless steel construction, trough measures 22" wide x 48" long x 36" deep, approximately 11 cubic feet, 304 stainless steel unit has rotary joints on both ends. Unit is 1.5 HP, 230/460 volt, 660 RPM to torque reducer, 46.32:1 ratio, on stainless steel frame, manufactured June 1992, serial number 10420-1, good condition.
  13. Cooker, 100 Gallon, Hot Break Tank, S/St, Process Sys,

    Cooker, Screw, Pressure, Atlas Mechanical, 20 PSI, S/st, (4)

    Stock Number: C739332

    (4) Pressure Cooker, manufactured by Atlas Mechanical. Unit has a stainless steel screw. Measures 24" diameter X 18' long. Rated for 20 PSI @ 260 deg. F. Unit has twenty-two (22) steam injection ports and eight (8) clamped top doors. 8" X 8" discharge. Unit is fed from 8" diameter stainless steel rotary airlock. Driven by approximately 10 HP motor thru heavy duty gearbox with sprocket. Good condition.

13 Item(s)

per page

Set Ascending Direction

Please wait...