+1-415-467-3400

Classifier

Search By Categories

7 Item(s)

per page

Set Descending Direction
  1. Classifier, Screw, 12" X 12', Hazen Quin, 1.5 HP, W/screen,

    Stock Number: S733025

    Screw classifier, manufactured by Hazen Quin in Denver, Colorado. Approximately 12" diameter x 12' long screw with 1? HP drive motor. Mounted on top at the bottom feed end is a Greystone screen measuring 24" x 48" with 1 HP motor. Last used on oil sands.
  2. Classifier, Screw, 12" X 12', Hazen Quin, 1.5 HP, W/screen,

    Classifier, Screw, 12" X 12', IRD, C/st, 3 HP (2)

    Stock Number: C740622

    (2) Screw classifier, 12" diameter X 12' long, flared tank, 3 HP, 220/440 V, 1730 RPM motor thru gearbox. Flight thickness is 1/4". Manufactured by IRD, 3' discharge height, excellent condition.
  3. Classifier, Screw, 12" X 12', IRD, C/st, 3 HP (2)

    Classifier, Screw, 24" X 20', 3 HP, V/s Gh, C/st,

    Stock Number: S209556

    Screw classifier, 24" diameter x 20' long, carbon steel. Driven by 3 HP vari-speed gear head motor.
  4. Classifier, Screw, 24" X 20', 3 HP, V/s Gh, C/st,

    Separator, Air Classifier, 12", Donaldson, A-12,

    Stock Number: S736073

    Laboratory size mechanical air separator, Majac-Donaldson model A-12 Acucut, 12" diameter with 1 HP vari-speed rotor drive, (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 HP (90 CFM @ 10" hg) primary air blower, and controls. Rated from 1-20 lbs/hr. No nameplate on this unit (Sister unit was Serial# 12-12090). Last use in pharmaceutical processing.
  5. Separator, Air Classifier, 12", Donaldson, A-12,

    Separator, Air Classifier, 12", Donaldson, Sub-micron,

    Stock Number: S670612

    Laboratory size mechanical air separator, Majac-Donaldson model A12 Acucut, 12" diameter with 1 HP vari-speed rotor drive (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 HP (90 CFM @ 10" hg) primary air blower, and controls. Rated from 1-20 lbs per hr. Run on 460 VAC + compressed air. Serial number 12-12087.
  6. Separator, Air Classifier, 12", Donaldson, Sub-micron,

    Separator, Air Classifier, 5'4", Hosokawa, Whizzer, (2)

    Stock Number: C738677

    (2) Air separator, single Whizzer separator, measures 64" diameter x 72" straight side, plus 78" cone bottom, inlet measures 32" x 39", outlet measures 15" x 82", Whizzer blades driven by 30 HP motor, vari-speed. Designed to be used with hosokawa air swept hammer mill. Unused.
  7. Separator, Air Classifier, 5'4", Hosokawa, Whizzer, (2)

    Separator, Air Classifier, 8'4", Raymond Static Classifier,

    Stock Number: A735932

    Separator, Raymond 66" diameter static classifier, last used with a 66" diameter Raymond roller mill for classification of coal fines. Not a double Whizzer separator. It has static veins that are electrically adjustable with controls. Used for 400 hours only. Dismantled and ready to ship. Condition excellent. Raymond serial number 77124, drawing number D-GR-2814-0.

7 Item(s)

per page

Set Descending Direction

Please wait...