+1-415-467-3400

Case Former/Packer/Erector

20 Item(s)

per page

Set Descending Direction
  1. Caser, Erector, Apv-douglas, Mdl COBS-30,

    Stock Number: S175450

    APV-douglas case erector, model COBS-30, stainless steel frame and glass cabinet enclosures. To include a Alauterback hot glue system as well as a compression section and take away conveyor, serial number M-2021.
  2. Caser, Erector, Apv-douglas, Mdl COBS-30,

    Caser, Erector, Belcor, Mdl 505, Pack Station,

    Stock Number: S740938

    Belcor 505 Semi-Automatic Case Box Former / Erector and Pack Station, Model number 505, Serial number 505-7276, constructed of stainless steel and aluminum. Quick size change over adjustment feature. Case size range 8" to 26.5" Long, 6" to 16" Wide, minimal 3" High Average speed is 15 CPM;Pneumatic operation, Air regulator/filter assembly. Leg levelers; 80 psi Air requirements. (See Item number S740939 for Belcor model 252 top & bottom case taper).
  3. Caser, Erector, Belcor, Mdl 505, Pack Station,

    Caser, Erector, Little David, Mdl CF30

    Stock Number: D740904

    Case erector, manufactured by Little David, model # CF30. Previously used to fold, close and tape boxes for manufactured parts. Capable of speed up to 10 cases per minute. Can handle cases with these dimensions: length 8"-18", width 8"-15" and height 6"-18". Overall dims: 9'Lx6'Wx6'H. Allen-Bradley MicroLogix 1000. Air requirement: 80 psi min. Electrical: 120V, 1ph, 60Hz, 10 amps.
  4. Caser, Erector, Little David, Mdl CF30

    Caser, Erector, McDowell, Mdl 201LH

    Stock Number: D740903

    Case erector, manufactured by McDowell, model number 201LH. Rugged duty compact case erector capable of 30 cases per minute. Has a case size range: 5"- 3/4-24" Long X 5-3/4"-24" Wide X 10"-33" Deep. Capable of erecting and sealing HSC, RSC, and wax cases. 24" high vertical magazine. Vari-speed driven unit. This machine includes a Nordson 3400 Glue Unit. This machine has been overhauled and repainted.
  5. Caser, Erector, McDowell, Mdl 201LH

    Caser, Erector, Packer, Automation Robotics, Mdl Robopack-2000,

    Stock Number: C732453

    Automation Robotics case packer/erector, fully integrated, Model Robopack-2000. Yogurt cups conveyed single lane to the machine. An automatic lane collator divides them into 3 lanes. One of the four robotic arms with suction cups pick up the 12 cups and rotate them. An automatic case erector erects a case. Robotic arm place the cups inside the box. The box is ejected on roller conveyor. Included are hange parts to pack 6 large tubs of yogurt in a box. Omron PLC programmable. 15 CPM, 120Volt, 10 amp, 80 PSI air. Built 2002.
  6. Caser, Erector, Packer, Automation Robotics, Mdl Robopack-2000,

    Caser, Erector, Pearson, Mdl CE 35-G, Glue, 35 CPM, Wine,

    Stock Number: S740912

    Pearson model CE 35-G case erector with glue sealing, rated for up to 35 cases/minute, previously used at winery. Case size ranges from 5"-30" long X 3.5"-24" wide X 3.5"-26" high. Includes Nordson hot glue system. In good working condition when removed in March 2017. Small footprint case erector. Rated for 460V, 3/60Hz. New in 2006. Good Condition.
  7. Caser, Erector, Pearson, Mdl CE 35-G, Glue, 35 CPM, Wine,

    Caser, Erector, SWF, Mdl CE151, Glue, Juice Bottles,

    Stock Number: A739012

    SWF Model CE151 automatic case erector, glue-type, previously used to make cases for multi-serve juice sizes. Rated for 440 volt, 3-phase, 60 Hz, 14.0 amps. New in 2005 and in working condition when taken out of service.
  8. Caser, Erector, SWF, Mdl CE151, Glue, Juice Bottles,

    Caser, Former, Erector, Packer, Altair, Mdl OCME Altair 60,

    Stock Number: C739417

    Altair Ocme Case Former/Divider Inserter, model Altair 60. Unit is capable of forming boxes boxing 750 ML and 1.5 liter bottles at a capacity of up to 60 cycles/minute. Includes Mettler Toledo Checkweigher, model CS 3600 GI. Unit is a high speed checkweigher. Complete with Allen Bradley touch-screen controls and a Nordson Pro Blue glue system. Unit has five (5) feed stations for dividers. Bottle infeed with oscillating plates measures 5" wide. Includes stainless steel Arrowhead Corporation conveyor measuring 18" wide as well as mild steel discharge roller conveyor measuring 25' long with a 90 degree turn. Also includes Slautte Back KB20 glue applicator. Unit new in 2009. Excellent condition.
  9. Caser, Former, Erector, Packer, Altair, Mdl OCME Altair 60,

    Caser, Former, Moen, Mdl PF106-EFB,

    Stock Number: C731527

    Moen box former, Model number PF106-EFB, "E-Fort bliss former," forms tray bliss body wrap and securely glues e-divider inside body wrap, forming 2-piece corrugated shipper or display container. Features include belt drive system, touch screen controls, positive glue compression, vacuum assist feed systems etc. Fully automatic and appears to be in good condition.
  10. Caser, Former, Moen, Mdl PF106-EFB,

    Caser, Packer, Akron, 3 Lane,

    Stock Number: C732190

    Akron case packer, 440Volt, 3/60/6 amps , 120Volt, 3 lanes, 4" wide x 6' long. Stainless steel belt with feed section. Allen-Bradley digital controls, serial number ACP-18039.
  11. Caser, Packer, Akron, 3 Lane,

    Caser, Packer, Combi, Mdl E3000, Ergpack, Case Sealer,

    Stock Number: A740832

    Combi Model E3000 Ergopack case packer with model TBS100FC case sealer. Previously used at brewery for packing beer. Complete with case sealer, case erector, Ergo pack and conveyor. Good condition.
  12. Caser, Packer, Combi, Mdl E3000, Ergpack, Case Sealer,

    Caser, Packer, Delkor, Spot-pak, Mdl SP-LH-FL,

    Stock Number: S736081

    Case packer/tray loader, manufactured by Delkor, "Spot-Pak," model number SP-LH-FL, set up to place (12) containers onto corrugated pad in 4x3 pattern, loading arm includes suction cups and is pneumatically operated. Includes corrugated pad feed chute, leading to chain belt conveyor, with 16" x 13" spacing for pads. Chain belts are driven by 1 HP DC motor thru gear box and chain & sprocket assembly, with vari-speed controls. Has provisions for administering temporary bond adhesive (glue) to corrugated pads prior to loading of containers (less glue applicator). Serial number SP-1990. Unitized on all stainless steel frame. Previously used to load yogurt cups. Appears to be in very good condition.
  13. Caser, Packer, Delkor, Spot-pak, Mdl SP-LH-FL,

    Caser, Packer, Douglas, Mdl Invex, Horizontal Load,

    Stock Number: C736254

    Douglas horizontal load case packer / tray packer, Model Invex, stainless steel frame, Previously run at 12-14 cases/minute, runs wide range of products with fast, repeatable changeovers. Inside case dimension: capable of 9-9/16" - 15.36" direction of travel; 5" - 9-1/4" vertical dimension; 12.75" - 21" across machine. Last running products from 8 oz to 5 lb. in a variety of pack patterns (3x4x2, 2x2x2, 2x3x2, 1x4x3 & 1x4x1). New in 2008. Serial# M107023. Has seen very little use and is in excellent condition.
  14. Caser, Packer, Douglas, Mdl Invex, Horizontal Load,

    Caser, Packer, Hartness, Globalpack 3500, 60 CPM,

    Stock Number: C732677

    Hartness International high speed continuous rotary case packer, Model "Globalpack 3500," 6 station with 24 plastic packing fingers for each station. Rated speeds up to 60 CPM. Unit is capable of handling glass, plastic, round/non-round containers from 10 oz to 2-1/2 gallon, can fill numerous packages - corrugated, tab lock, rsc, or plastic. Electricals - 3/60 Hz 240/460V, 60/30-amp min. Electrical service recommended. With digital touch screen and Allen-Bradley PLC control box, change parts and all interconnecting conveyors. Welded on base with forklift slots. Excellent condition.
  15. Caser, Packer, Hartness, Globalpack 3500, 60 CPM,

    Caser, Packer, Hartness, GlobalPack 3500, 70 CPM,

    Stock Number: C739429

    Hartness International high speed continuous rotary case packer, Model "GLOBALPACK 3500," 6 station with 24 plastic packing fingers for each station. Previously used to pack cases of wine at approximately 70 cases/min. With digital touch screen and Allen-Bradley PLC control box, change parts and all interconnecting conveyors. Excellent condition.
  16. Caser, Packer, Hartness, GlobalPack 3500, 70 CPM,

    Caser, Packer, Hartness, Mdl 2900, 40 CPM,

    Stock Number: D740928

    Case packer, manufactured by Hartness, model number 2900. Hartness servo soft drop case packer rated up to 40 cases per minute depending on case size and applications. Air consumption: 12-16 CFM @40 cases per minute. Product infeed chain height: 45". Case infeed height: 13-1/8". Left to right product flow configuration with respect to operator. Main electrical panel on left hand side, operator panel on right hand side of machine. Air supply: 60 psi minimum. Allen-Bradley SLC 5/04, MicrolLogix 1500 and PanelView 300 HMI. Electrical: 575V/3Ph/60Hz/30 Amps minimum. 26' overall length x 6' overall width.
  17. Caser, Packer, Hartness, Mdl 2900, 40 CPM,

    Caser, Packer, Hartness, Mdl 825, Laner,

    Stock Number: D740929

    Case packer, manufactured by Hartness, model number 825. Air transfer drop case packer. Equipped with a grid numbber G24553 for 16 ounces in 3 x 2 x 2 pattern. Includes laner on infeed.
  18. Caser, Packer, Hartness, Mdl 825, Laner,

    Caser, Packer, Standard Knapp, Mdl 939, Laner,

    Stock Number: D740930

    Case packer, manufactured by Standard Knapp, model number 939. With Combi-America diverter and 15 inches x 18 feet laner, stainless steel construction, Plexiglas enclosure, Allen-Bradley Panelview 900 touch screen controls. Allen-Bradley SLC 5/04 CPU and Allen-Bradley Powerflex 4. Previously was running 12-ounce glass, 18-ounce glass, 32 ounce glass and 128 ounce plastic containers. Electrical: 460V, 3Ph, 60Hz.
  19. Caser, Packer, Standard Knapp, Mdl 939, Laner,

    Caser, Packer, Standard Knapp, Mdl 940-2B,

    Stock Number: S169400

    Caser, Standard Knapp model 940-2B, double drop case packer with change parts for 12, 16, 20 and 24 oz. Bottles. Previously fed 12" x 18" x 4" deep cardboard trays, controls, serial number 161.
  20. Caser, Packer, Standard Knapp, Mdl 940-2B,

    Caser, Picker, Hartness, GlobalPick 3500, 70 CPM, (2)

    Stock Number: C739430

    (2) Hartness International high speed continuous rotary case picker, Model "GLOBALPICK 3500," 6 station with 24 plastic picking fingers for each station. Previously used to pick wine bottles after depalletizer at a capacity of approximately 70 case/min. Electricals - 3/60 Hz 240/460V, 60/30-amp min. With digital touch screen and Allen-Bradley PLC control box, conveyors, etc. Excellent condition.

20 Item(s)

per page

Set Descending Direction

Please wait...