Case Packer

Akron case packer, 440Volt, 3/60/6 amps , 120Volt, 3 lanes, 4" wide x 6' long. Stainless steel belt with feed section. Allen-Bradley digital controls, serial number ACP-18039.

Combi Model E3000 Ergopack case packer with model TBS100FC case sealer. Previously used at brewery for packing beer. Complete with case sealer, case erector, Ergo pack and conveyor. Good condition.

Case packer/tray loader, manufactured by Delkor, "Spot-Pak," model number SP-LH-FL, set up to place (12) containers onto corrugated pad in 4x3 pattern, loading arm includes suction cups and is pneumatically operated. Includes corrugated pad feed chute, leading to chain belt conveyor, with 16" x 13" spacing for pads. Chain belts are driven by 1 HP DC motor thru gear box and chain & sprocket assembly, with vari-speed controls. Has provisions for administering temporary bond adhesive (glue) to corrugated pads prior to loading of containers (less glue applicator). Serial number SP-1990. Unitized on all stainless steel frame. Previously used to load yogurt cups. Appears to be in very good condition.

Douglas horizontal load case packer / tray packer, Model Invex, stainless steel frame, Previously run at 12-14 cases/minute, runs wide range of products with fast, repeatable changeovers. Inside case dimension: capable of 9-9/16" - 15.36" direction of travel; 5" - 9-1/4" vertical dimension; 12.75" - 21" across machine. Last running products from 8 oz to 5 lb. in a variety of pack patterns (3x4x2, 2x2x2, 2x3x2, 1x4x3 & 1x4x1). New in 2008. Serial# M107023. Has seen very little use and is in excellent condition.

Hartness International medium-speed case packer, model number 825. Unit capable of both 12 and 24 pack. Complete with controls and all associated drives. Previously used in beverage operation. Good condition.

Hartness International high speed continuous rotary case packer, Model "Globalpack 3500," 6 station with 24 plastic packing fingers for each station. Rated speeds up to 60 CPM. Unit is capable of handling glass, plastic, round/non-round containers from 10 oz to 2-1/2 gallon, can fill numerous packages - corrugated, tab lock, rsc, or plastic. Electricals - 3/60 Hz 240/460V, 60/30-amp min. Electrical service recommended. With digital touch screen and Allen-Bradley PLC control box, change parts and all interconnecting conveyors. Welded on base with forklift slots. Excellent condition.

Hartness International high speed continuous rotary case packer, Model "GLOBALPACK 3500," 6 station with 24 plastic packing fingers for each station. Previously used to pack cases of wine at approximately 70 cases/min. With digital touch screen and Allen-Bradley PLC control box, change parts and all interconnecting conveyors. Excellent condition.

Case packer, manufactured by Hartness, model number 2900. Hartness servo soft drop case packer rated up to 40 cases per minute depending on case size and applications. Air consumption: 12-16 CFM @40 cases per minute. Product infeed chain height: 45". Case infeed height: 13-1/8". Left to right product flow configuration with respect to operator. Main electrical panel on left hand side, operator panel on right hand side of machine. Air supply: 60 psi minimum. Allen-Bradley SLC 5/04, MicrolLogix 1500 and PanelView 300 HMI. Electrical: 575V/3Ph/60Hz/30 Amps minimum. 26' overall length x 6' overall width.

Case packer, manufactured by Hartness, model number 825. Air transfer drop case packer. Equipped with a grid numbber G24553 for 16 ounces in 3 x 2 x 2 pattern. Includes laner on infeed.

Case packer, manufactured by Standard Knapp, model number 939. With Combi-America diverter and 15 inches x 18 feet laner, stainless steel construction, Plexiglas enclosure, Allen-Bradley Panelview 900 touch screen controls. Allen-Bradley SLC 5/04 CPU and Allen-Bradley Powerflex 4. Previously was running 12-ounce glass, 18-ounce glass, 32 ounce glass and 128 ounce plastic containers. Electrical: 460V, 3Ph, 60Hz.

Caser, Standard Knapp model 940-2B, double drop case packer with change parts for 12, 16, 20 and 24 oz. Bottles. Previously fed 12" x 18" x 4" deep cardboard trays, controls, serial number 161.

Automatic Robotic Top Load Case Packer, manufactured by WePackIt Machinery, model number 400CP. Stainless steel construction. Unit is capable of up to 15 cases per minute depending on package size/configuration. Includes Tier Sheet Placer for Cup products as well as four (4) vacuum heads for robotic cup top loading into cases and four (4) vacuum heads for tier sheet placing per layer. Complete with controls. Previously used at food processing facility.