You're currently on:


14 Item(s)
per page
Capper, 8 Spindle, AC Vari Speed, 2 Tier

Capper screw machine with 8 spindle with grippe. Unit has AC variable speed control for sorter with gripper belts and 2 tier stabilizing belts. Cap size 1.532" diameter x 1.062" high. Less conveyor....

Capper, Capem, Mdl F, 8 Head,

Capem 8 head stainless steel capper with start stop controls. Unit is model F, non adjustable. Serial number 7613M....

Capper, Elf, Mdl SC781, Snap Cap,

Capper, model SC781, serial number 910756. Applies cap by pressure rollers. Includes cap feeder on stainless steel frame with casters.

Capper, Groninger, Mdl KVG 302, 2-head, Crimper,

Crimper capper, 2-head, manufactured by Groninger & Gompany, type number KVG 302, stainless steel construction. Includes a screw cap/crimp 2-lane feeder with vibratory mechanisms, 2-head orientator and 2-head crimper. Complete with 3-1/4" wide x 10' l...

Capper, Kaps-All, Mdl B-Semi, Adjustable,

Kaps-All capper, model B-semi, serial number 2611, controls for conveyor and gripper, adjustable. 4-1/2" wide x 7-1/2' long belt conveyor.

Capper, Mckenna, Mdl 700, Overcapper, Lidder,

Overcapper/lidder, manufactured by McKenna, Model number 700, includes 4-1/2" wide x 11' long feed conveyor and 6-1/2" wide x 7' long conveyors on each side of feed conveyor. Complete with cap feeder including (2) rollers measuring 1-3/4" diameter x 5...

Capper, Pack West, Mdl Auto200, 8 Spindle,

Pack West Auto 200 8-spindle automatic screw capping machine, serial number T-8-A/C-LR-0390. Rated up to approximately 200 containers/minute, unit has vari-speed controls for sorter, gripper belts discs for tightening. With 2 tier stabilizing belts, h...

Capper, Resina, Mdl LC89 Spec, 58MM,

Capper, resina, model LC 89 Spec, set for 58mm cap on 2" bottles. Unit complete with infeed and discharge conveyor, 2-1/4" wide x 70" long, with cap feed. Unit has start/stop control 1/2 HP 220/440V, type SC motor. Capable of 1/2 oz to 2 gal, 20 to 60...

Capper, Resina, Mdl S30, Inline, Bottle, 28mm

Resina model S30 inline bottom capper, rated up to 60 caps per minute based upon product specs, inline motorized conveyor with belt, last running 24 & 28mm caps. Unit has cap sorter, chute and pick off, container height adjustment and is run by 1 hp, 230 ...

Capper, Resina, Mdl U30-545, 52MM,

Resina model U30-545 high speed capper. Unit currently set up for 52mm cap. Includes conveyor, 3 sets of quills & bottle gripper belts. Unit has been partially dismantled for refurbishing, believed to be complete. Unit is complete with 3/4 HP, 3-phase...

Capper, Swan-matic, Mdl Swan-trol120,

wan-Matic Cap Master model Swan-Trol120. Unit operates on 110 volt thru DC converter for vari-speed control. motor rating is 1/4 HP. Last running small caps on test vials. Serial number C 300-3458 and in very good condition

Capper, Vitrocrisa, Mdl CM-011, 1 Head, 38MM, Semi-auto,

Capper, Vitrocrisa model CM-011, single head. Unit is semi-automatic, manual feed and unload with approx. 38mm cap.

Capper, West, Mdl RW500F, 12 Head, Feeder

West model RW500F capper, 12 head rotary crimp capper. Unit is rated at speeds from 50-300 bpm, Height from 30-12 MM and 13-5 MM diameter. Unit is less conveyor and bottle guides. Includes removable top mounted centrifugal cap feeder. Less cap chute from ...

Lidder, 3" Dia, Conveyor, S/st

Lidder, last used on 3" diameter lids, complete with 6" x 5' long conveyor, stainless steel, on wheels.

14 Item(s)
per page
Can't find what you are looking for?