+1-415-467-3400

Bin

25 Item(s)

per page

Set Ascending Direction
  1. Bin, 1800 CF, C/St, 11' X 18' X 5', 50 Ton

    Stock Number: C740396

    Bin, 11' diameter X 18' high X 5' deep cone bottom. Approximately 1800 cubic feet capacity. 12" X 12" slide gate discharge. I-Beam legs with 17' high discharge height. 18" X 18" top flanged feed opening. Unit is layed down and ready to load.
  2. Bin, 1800 CF, C/St, 11' X 18' X 5', 50 Ton

    Bin, 1,440 CF, 10' X 18' X 8', 75 Ton, Cone, Sand (2)

    Stock Number: C739789

    (2) Bins, 75 ton each on sand, measures 10' diameter x 18' high X 8' high cone bottom, approximately 1,440 cubic feet. Electric slide gate discharge, top manhole. Connected by catwalk and includes ladder. Features splitter valve on top.
  3. Bin, 1,440 CF, 10' X 18' X 8', 75 Ton, Cone, Sand (2)

    Bin, 950 CF, S/st, 8' X 8' X 14', 45 Deg Cone,

    Stock Number: C104050

    Bin, 950 cu.ft. polished stainless steel internals and externals. Unit is food grade square bin measuring 8' x 8' x 14' straight side to 45 degree cone, slight cone top. 24' overall height with discharge 4' off floor. Mounted on (4) 8" diameter pipe legs. Complete with seismic ratings. New 1993. Excellent condition. Last used on bulk rice crisp storage. Vessel is complete with 12" diameter slide gate at discharge, 30" side manway, 4" wide lexan site glasses running the height of the straight side.
  4. Bin, 950 CF, S/st, 8' X 8' X 14', 45 Deg Cone,

    Bin, 25 Ton, 8' X 16', 60 Deg Cone, Sand,

    Stock Number: C739790

    Bin, 25 ton capacity on sand, 8' diameter x 16' high with 60 degree cone bottom. Includes electric slide gate discharge valve going to 8' long screw conveyor. Mounted on I-beam legs, discharge measures approximately 10' high. Features side ladder going to the top.
  5. Bin, 25 Ton, 8' X 16', 60 Deg Cone, Sand,

    Bin, 625 CF, S/st, 10' X 8' X 8', Vibratory Btm, Carmen,

    Stock Number: C104150

    Stainless steel bin, 10' diameter X 8' straight side with an 8' diameter Carmen Industries Model 8BGD vibrating bottom (3 HP). Bottom has (2) 12" diameter discharge ports. Bin is lug supported and has a flat top. Carmen serial number CH-10309.
  6. Bin, 625 CF, S/st, 10' X 8' X 8', Vibratory Btm, Carmen,

    Bin, 50 CF, S/st, 4'6" X 7', Cone Bottom,

    Stock Number: C740347

    Stainless steel surge bin, 50 Cubic Foot capacity. Unit measures 54" diameter X 96" tall with cone bottom. Previously fed by dust collector.Good condition. Used as feed bin for single spout bag filler.
  7.  Bin, 50 CF, S/st, 4'6" X 7', Cone Bottom,

    Bin, Tote, Liquid, S/st, 500 Gallon, Plymouth, CB, (4)

    Stock Number: S740797

    (4) Plymouth IBC Service liquid "sure_drain" stainless steel tote bin, 500 gallon capacity, unit has cone botom, 26" straight side, is constructed of 304 stainless steel, has 2" center bottom outlet and 22" top manway.
  8. Bin, Tote, Liquid, S/st, 500 Gallon, Plymouth, CB, (4)

    Bin, 400 CF, C/st, 8' X 8' X 42", 70 Deg Cone,

    Stock Number: C104220

    Bin, 400 cu.ft. holding capacity, carbon steel construction measuring 8' x 8' x 42" straight side with 70 degree cone to 8" x 8" bottom discharge to rotary vain feeder. Feeder is powered by fractional HP right angle gear drive with frequency controller.
  9. Bin, 400 CF, C/st, 8' X 8' X 42", 70 Deg Cone,

    Bin, Tote, Liquid, S/st, 350 Gallon, Hoover, FB, 44" L (3)

    Stock Number: S740795

    (3) Hoover liquid stainless steel tote bin, 350 gallon capacity, unit has flat bottom, is constructed of 304 stainless steel, has 2" side bottom outlet and 22" top manway. Tote measures 44" x 50" x 54".
  10. Bin, Tote, Liquid, S/st, 350 Gallon, Hoover, FB, 44" L (3)

    Bin, 300 CF, Dump Hopper, C/st, 12' X 12' X 80", Dakota Fab,

    Stock Number: C740618

    Feed hopper, 12' X 12' X 80" with inverted pyramid bottom, on angle iron stand, 10' X 10', discharge conveyor measures 24" X 10' long, includes 1 HP chain drive, switch gear, manufactured by Dakota Fabricating. Used with scalping screen, stock number C740617, and conveyor, stock number C740623.
  11. Bin, 300 CF, Dump Hopper, C/st, 12' X 12' X 80", Dakota Fab,

    Bin, 175 CF, S/st, 60" X 10', Live Bin Bottom, Auger, (5)

    Stock Number: S740527

    (5) Stainless steel bin with dual auger live bin bottom, approximately 175 Cu. Ft. capacity. Bin measures 60" diameter X 80" straight side, plus 48" cone, leading to 32" X 22" flange discharge. Flange opening connects to live bottom bin with stainless steel 6" diameter X 5-1/2' long tapered screws. Screws are driven by 1.5 HP motor. Previously used at food processing facility and in good condition.
  12. Bin, 175 CF, S/st, 60" X 10', Live Bin Bottom, Auger, (5)

    Bin, 75 CF, C/st, 4' X 5', 2-1/2', Live Btm, Baghouse,

    Stock Number: S104455

    Bin, carbon steel construction, 75 cu. ft., 4' diameter x 5' straight side with 2-1/2' live bottom minus vibrator. Bin has (3) wand electric agitators for moving material. Unit has a Schick AutoJet pulse dust collector with 6" x 6' bags, total of 9 bags for 81 sq. ft. of collection. Bin has structural stand and catwalk, overall dimensions are 7' x 7' x 16'.
  13. Bin, 75 CF, C/st, 4' X 5', 2-1/2', Live Btm, Baghouse,

    Bin, 75 CF, S/st, 4' X 66", Live Btm,

    Stock Number: S104450

    Live bottom bin, stainless steel, 48" x 66", mezzanine mount with live bottom, 16" diameter manway, 12" diameter center product inlet. Complete with live bottom, shallow degree cone thru 12" diameter product outlet. Unit is less vibrator on live bottom.
  14. Bin, 75 CF, S/st, 4' X 66", Live Btm,

    Hopper, 75 CF, C/st, 5' x 4' x 30", 45 Deg Cone, On Stand

    Stock Number: S738432

    Hopper, bin, approx. 75 cu. ft. capacity, carbon steel construction, measures 5' wide x 4' long x 30" straight side, plus 45 deg cone bottom, measuring 4' high, unit includes 5" x 12" center bottom discharge, mounted on stand.
  15. Hopper, 75 CF, C/st, 5' x 4' x 30", 45 Deg Cone, On Stand

    Bin, 60 CF, S/st, Elevator, Hoppman,

    Stock Number: C104480

    Hoppman cap bin, stainless steel with mild steel incline cleated belt take away conveyor, 9-1/2' discharge height. Unit is a Model EP Series 60 FT and was new in 1984. Has control panel and in good condition. Serial number 319010.
  16. Bin, 60 CF, S/st, Elevator, Hoppman,

    Bin, 60 CF, S/st, 34" X 60" X 60", Kloppenberg,

    Stock Number: S737355

    Ice bin, stainless steel construction, 34" x 60" x 60" deep, stainless steel construction, manufactured by Kloppenberg, 24" x 30" top opening with 22" x 8" opening with plexi-glass sliding doors, also includes 29" x 16" opening with hinged door to access ice or other product inside.
  17. Bin, 60 CF, S/st, 34" X 60" X 60", Kloppenberg,

    Bin, 50 CF, S/st, 46" X 41" X 43", Tote, (22),

    Stock Number: H733269

    (22) Tote bin, tank, approximately 375 gallon capacity, 50 CF, constructed of stainless steel, 46-1/2" wide x 41-1/2" long x 43-1/2" straight side, cone bottom, 24" diameter center top opening, 10" diameter center bottom outlet, material handle division, "tote bulk handling system," fair condition.
  18. Bin, 50 CF, S/st, 46" X 41" X 43", Tote, (22),

    Bin, 40 CF, S/st, 50" X 42", Cone, Flo Bin, (3)

    Stock Number: S736853

    (3) Flo-Bin container, approx. 40 cu. ft. capacity, measures 50" wide x 42" long x 30" straight side, plus cone bottom, 5" diameter center bottom outlet with manual valve, stainless steel contacts, 24" diameter center top opening (less cover). Previously used at food manufacturing facility. Mild steel frame with forklift slots.
  19. Bin, 40 CF, S/st, 50" X 42", Cone, Flo Bin, (3)

    Bin, 5 Ton, Dual Compartment, Self Unloading, Auger,

    Stock Number: A740542

    Dual compartment self unloading bins, rated for 5 ton total with inclined auger discharges, carbon steel construction. Compartment A measures 8' wide with a 2' x 8' removable steel grate for loading with skid steer loader, will hold approximately 3 ton. Compartment B measures 6' wide with (2) hatches for bulk bag loading, will hold approximately 2 ton. Augers are 6" diameter and are driven by independent 3 HP, 480V, 3-phase motors. Augers, gear boxes, and motors are all new and never used.
  20. Bin, 5 Ton, Dual Compartment, Self Unloading, Auger,

    Bin, Bin Bottom, 2 Screw, 12" X 10' Screws, (2), 3 HP,

    Stock Number: C104635

    Stainless steel bin bottom, with (2) 10" diameter x 10' long stainless steel screws. Screws are each driven by 3 HP and shaft mounted reducer. Trough and partial cover are also stainless steel.
  21. Bin, Bin Bottom, 2 Screw, 12" X 10' Screws, (2), 3 HP,

    Bin, Bin Bottom, 4 Screw, 9" x 7', C/st, 1 HP, 2-way,

    Stock Number: S732586

    Bin, bottom auger discharge unit, carbon steel contact parts. Unit has 4 screws, 2 each direction, 9" diameter x 7' long with 36" x 48" bolt flange for bottom of bin, screws rotate at 49.04 RPM, includes twin 36" x 12" flanged discharge. Unit includes independent 1 HP, 220/440V XP motor drive with torque arm reducers for each auger and includes 2 Bindicator units for sensing product. Unit in very good condition.
  22. Bin, Bin Bottom, 4 Screw, 9" x 7', C/st, 1 HP, 2-way,

    Bin, Bin Bottom, 4 Screw, 9" x 7', S/st, 1 HP, 2-way,

    Stock Number: S732587

    Bin, bottom auger discharge unit, stainless steel contact parts. Unit has 4 screws, 2 each direction, 9" diameter x 7' long with 36" x 48" bolt flange for bottom of bin, screws rotate at 48.69 RPM, twin 36" x 12" flanged discharge. Unit includes independent 1 HP, 220/440V motor drive with torque arm reducers for each auger and includes 2 bindicator units for sensing product. Unit in very good condition.
  23. Bin, Bin Bottom, 4 Screw, 9" x 7', S/st, 1 HP, 2-way,

    Bin, Cold Feed, 3-Compartment, Weigh Hopper, Belt Conveyor

    Stock Number: C739936

    Used 3-compartment cold feed bin with weigh hopper and take away belt conveyor, previously used at concrete batch plant. Cold feed bin measures 24' long x 8' wide x 10' high, with 8' long individual compartments with 17" x 10" discharge openings. Feed bin discharges to 8-1/2' x 8-1/2' x 5' deep weigh hopper with 36" x 18" discharge. Weigh hopper feeds to 24" wide x 20' long inclined belt conveyor with rubber belt. Includes frame for weigh hopper and belt conveyor.
  24. Bin, Cold Feed, 3-Compartment, Weigh Hopper, Belt Conveyor

    Bin, Bin Bottom, 3-Screw, S/st, 8"x 8', 2 HP

    Stock Number: S740520

    Live bin bottom with (3) screws, measuring 8" diameter X 8' long, stainless steel construction. Screw are tapered and act as densifying screws. Driven by 2 HP motor thru gear box. Previously used at food processing facility and in good condition.
  25. Bin, Bin Bottom, 3-Screw, S/st, 8"x 8', 2 HP

    Bin, Bin Bottom, 2-Screw, 5" x 8', S/st, Less Motor

    Stock Number: S740521

    Live bin bottom with (2) screws, measuring 5" diameter X 8' long, stainless steel construction. Offered less motor. Previously used at food processing facility and in good condition.

25 Item(s)

per page

Set Ascending Direction

Please wait...