CENTRIFUGE AUTO DESLUDGER, ALFA LAVAL, MDL BRPX-207- SGP-74C-60, 316 STAINLESS STEEL, WITH A DEEP SLUDGE COVER, UNIT IS GUARDIAN PURIFIER WITH A FIXED PARING DEVICE ON THE LIGHT PHASE, GRAVITY DISCHARGE ON THE HEAVY PHASE, TIMER DISCHARGE AND PARTIAL DISC... Learn More

ALFA LAVAL DESUDGER CENTRIFUGE, MODEL MAPX 207SGT-29-60. AUTOMATIC DESLUDGING OIL SEPARATOR, STAINLESS STEEL BOWL AND DISC STACK, CAST STEEL HINGED TOP COVER. CENTRIFUGE EQUIPPED WITH A 7.5 HP DIRECT CONNECT CLUTCH MOTOR DRIVE. SKID MOUNTED WITH GEAR PUMP... Learn More

(3) CENTRIFUGE, AUTO DELUDGING, MANUFACTURED BY ALFA LAVAL, MDL FOPX-609-TFD-24-60, STAINLESS STEEL CONTACTS, EQUIPPED WITH 15 H.P. DIRECT CONNECT MOTOR DRIVES, BOWLS ARE RATED FOR 5,180 RPM, AND ARE SET UP AS 3-WAY PURIFIER/CLARIFIER. THE INLETS ARE OPEN... Learn More

ALFA LAVAL CENTRIFUGE, AUTODESLUDER, MODEL# MOPX-309, STAINLESS STEEL CONTACTS, COMPLETE WITH OIL PUMP AND HEATER. INCLUDES MODEL# EPC-41 CONTROL PANEL. VERY GOOD CONDITION.
... Learn More

CENTRIFUGE, AUTO DESLUDGER, DELAVAL, MDL BRPX-207SGV-39-60/4183-4, 316 STAINLESS STEEL WITH A KN DEEP SLUDGE COVER, TWO WAY CLARIFIER EQUIPPED WITH 10 DIRECT CONNECT CLUTCH MOTOR DRIVE. WORM WHEEL & TACHOMETER RATED FOR 1700-1800 RPM, REVOLUTION COUNTER I... Learn More

DELAVAL SEPARATOR, MDL AFPX 407BGP/BGT-14/74, WITH ALL WETTED PARTS BEING S/S. IT IS EQUIPPED WITH A 10 H.P. DRIVE, TOOLS, AND TIMERS. LAST SERVICE WAS FOOD.... Learn More

CENTRIFUGE, AUTO DESLUDGER, DELAVAL, MODEL BRPX-207SGV-39-60/4183-4, 316 STAINLESS STEEL WITH A KN DEEP SLUDGE COVER, TWO-WAY CLARIFIER, EQUIPPED WITH A 10 HP DIRECTLY CONNECTED CLUTCH MOTOR DRIVE. WORM WHEEL & TACHOMETER RATED FOR 1700-1800 RPM, REVOLUTI... Learn More

CENTRIFUGE, DELAVAL, MODEL BRPX-213-19S SEPARATOR, S/N 3527549, WITH ALL CONTACT PARTS BEING STAINLESS STEEL. THE UNIT IS EQUIPPED WITH A 25 HP, 208-220/440V, 1800 RPM, 3/60HZ DIRECTLY CONNECTED CLUTCH MOTOR DRIVE, IS TO INCLUDE INFEED PIPING, SET UP AS A... Learn More

CENTRIFUGE, AUTO DESLUDGER, IMMA MEDIA (ITALIAN), ALL WETTED PARTS BEING SANITARY STAINLESS STEEL, IT IS EQUIPPED WITH 15 HP DIRECT CONNECT 3/60/230V/1700 RPM MOTOR. BOWL IS RATED FOR 6500 RPM, BOWL DIAMETER 405 MM, WITH SPECIFIC GRAVITY OF 1.2. UNITIZED ... Learn More

WESTFALIA DECANTER CENTRIFUGE, MODEL CA 505-01-02. WITH ALL WETTED PARTS BEING SANITARY STAINLESS STEEL. EQUIPPED WITH 125 HP MAIN DRIVE AND A 30 HP MOTOR FOR SCROLL CONTROL WHEN INFEED SOLIDS FLUCTUATE. IT INCLUDES AUTOMATIC BEARING LUBE SYSTEM, CONTROLS... Learn More

WESTFALIA AUTOMATIC DESLUDING CENTRIFUGE, MDL SAMR 5036, SANITARY STAINLESS STEEL CONTACT PARTS. HAS 20 HP MAIN DRIVE THRU FLUID CLUTCH, BOWL RATED FRO 6500 RPM AND HAS A SLUDGE HOLDING SPACE OF 1.6 GAL. UNIT NEW MID 70'S, LAST RUNNING GRAPE JUICE IN A WI... Learn More

(3) WESTFALIA AUTOMATIC DESLUDGING CENTRIFUGE, MODEL SB 80, WITH ALL WETTED PARTS BEING SANITARY STAINLESS STEEL. THE UNITS ARE EQUIPPED WITH 75 HP, V-BELT MAIN DRIVES, ALL PIPING, WATER HERNESS, SPINDLE LUBE PACKAGE, TOOL AND CONTROLS. RAN FOR (6) WEEKS ... Learn More

(3) WESTFALIA AUTOMATIC DESLUDGING CENTRIFUGES, MDL SC 35-06-177, STAINLESS STEEL, WITH AN 18 KW V-BELT MAIN MOTOR DRIVE. THE BOWL IS RATED FOR 7260 RPM'S, IS EQUIPPED WITH HYDRO STOP, AND HAS BEEN COMPLETELY GONE THROUGH WITH BEARING AND SEALS REPLACED, ... Learn More

WESTFALIA AUTOMATIC DESLUDGING CENTRIFUGE, MDL SC 35-06-177, S/S, WITH AN 18 KW V-BELT MAIN DRIVE. THE BOWL IS RATED FOR 7260 RPM'S, IS EQUIPPED WITH HYDRO STOP, IT HAS BEEN REMANUFACTURED BY CENTRICO AND IS STILL IN THE FACTORY SHIPPING CRATE. THE CENTRI... Learn More

WESTFALIA MODEL MSA20-06-076, AUTOMATIC DESLUDGING CENTRIFUGE WITH ALL CONTACT PARTS VEING SANITARY STAINLESS STEEL. UNIT IS SET UP AS A TWO WAY CLEARIFIER, EQUIPPED WITH 17 KW, 230/ 460 VAC, 60 CYCLE DRIVE, APPROX. 25 HP. UNIT RATED FOR 5850 RPM, BEARS S... Learn More

CENTRIFUGE, WESTFALIA, MODEL# OSA-20, AUTO DESLUDGER, CLARIFIER, BOWL RATED FOR 7250 RPM, DRIVEN BY 15 HP DIRECT DRIVE, COMPLETE WITH CENTRIPETAL PUMP, DIGITAL TOUCH SCREEN CONTROL BOX, VARIABLE FREQUENCY DRIVE, ETC. UNIT WAS PURCHASED USED, COMPLETELY RE... Learn More

WESTFALIA CENTRIFUGE, MODEL SA 80-06-177, STAINLESS STEEL, WITH 60 HP V-BELT DRIVE, PIPING, CONTROLS, TOOLS, AND ROTARY BRUSH STAINER. NEW 1974, SERVICED SEASONALLY ON GRAPE JUICE AND ONLY RUN SIX WEEKS PER YEAR FOR 18 HOURS PER DAY. ... Learn More

WESTFALIA LABORATORY SEPARATOR/HIGH-SPEED CENTRIFUGE. MODEL SA 1-02-475, S/N 1678 010. THE SEPARATOR CONSISTS OF A SINGLE CENTRIPETAL PUMP USED FOR PRESSURE DISCHARGE OF LIGHT LIQUID WHILE HEAVY LIQUID IS DISCHARGED WITHOUT PRESSURE. THE UNIT IS A GAS TIG... Learn More

CENTRIFUGE, AUTO DESLUDGER, WESTFALIA, MODEL SA-20-06-076. ALL CONTACT PARTS STAINLESS STEEL SANITARY CONSTRUCTION. BOWL RATED AT 6,500 RPM. EXCELLENT CONDITION. COMPLETE WITH TOOLS AND SOME SPARE PARTS.
... Learn More

(2) CENTRIFUGE, AUTO DESLUDGER, WESTFALIA, MODEL SA-MR-15037, STAINLESS STEEL. UNIT HAS A BOWL SPEED OF 4500 RPM FOR A SPECIFIC GRAVITY OF 1.0 OF THE PRODUCT TO BE PROCESSED AND 1.2 OF THE SEPARATED SOLIDS, RATED FOR UP TO 25,000 GALLONS/HR. DRIVEN BY APP... Learn More

CENTRIFUGE, AUTO DESLUDGER, WESTFALIA, MODEL SA20-06-076, WITH ALL CONTACT PARTS BEING SANITARY STAINLESS STEEL. THE UNIT IS SET-UP AS A TWO-WAY CLARIFIER, IS EQUIPPED WITH 11KW, 380 VOLT, 1460 RPM, 50 CYCLE MOTOR, BOWL RATED AT 6500 RPMs, NEW 1976. TO IN... Learn More

WESTFALIA CENTRIFUGE, MODEL SA45-36-577, STAINLESS STEEL CONSTRUCTION, 2 WAY CLARIFIERS LAST USED ON OIL REFINING. UNIT IS COMPLETE WITH 40 HP EXPLOSION PROOF MOTOR THROUGH V-BELT DRIVE. MACHINE IS OFFERED WITH INFEED PIPING, VALVES, EXPLOSION PROOF CONTR... Learn More

CENTRIFUGE, AUTO DESLUDGER, WESTFALIA MODEL SA7-06-076, STAINLESS STEEL, 5 HP 3 PHASE 230/460 VOLT. UNIT IS TYPE 316 STAINLESS STEEL PRODUCT CONTACT PARTS, MAXIMUM BOWL SPEED OF 8380 RPM, RATED FOR SPECIFIC GRAVITY OF 1.0 ON PRODUCT TO BE PROCESSED, 2.0 O... Learn More

WESTFALIA AUTOMATIC DESLUDGING HERMETIC CENTRIFUGE, MODEL SA 82-47-177. ALL SANITARY STAINLESS STEEL CONTACT PARTS. 75 HP V-BELT MOTOR DRIVE, BOWL RATED FOR 4450 RPM, 46 LITER CAP, SEDIMENT HOLDING SPACE OF 25 LITERS. UNIT INCLUDES TIMER, AMIN STARTER, AL... Learn More

CENTRIFUGE, AUTO DESLUDGER, WESTFALIA, MODEL SAMR-3036, STAINLESS STEEL. UNIT HAS 10 HP 230/460V 1725 RPM MOTOR. HAS 2" INLET, 3/4" AND 6" SIDE OUTLETS. BOWL SPEED OF 7700 RPM. S/N 1636.01. NO TIMER BOX. ... Learn More

(4) WESTFALIA CENTRIFUGES, MODEL SB 80-06-177, STAINLESS STEEL, WITH 75 H.P. V-BELT DRIVES, PIPING, CONTROLS, TOOLS, NEW 1974 /5, SERVICED BY THE PLANT SEASONALLY, RUN SIX WEEKS PER SEASON FOR 18 HOURS PER DAY ON GRAPE JUICE.... Learn More

WESTFALIA CENTRIFUGE, MODEL SB 80-06-177, ALL SANITARY STAINLESS STEEL, DRIVEN 75 H.P. V-BELT DRIVE. INCLUDES ALL PIPING, CONTROLS, AND WESTFALIA ROTARY STRAINER. RECENTLY SERVICED.... Learn More

SHARPLES CENTRIFUGE, CLARIFIER, MODEL AS-14, M340A-52A-81F, BRONZE/STEEL CONTACT, 4" X 18" BOWL, 1700 RPM, 2 HP, 440 VOLT, 3400 RPM DRIVE. LAST USED ON DIESEL OIL.... Learn More

SHARPLES CLARIFIER CENTRIFUGE BATCH TYPE AS16. MODEL NUMBER M-4-P-25CY, 2-1/4" DIA. NOZZLE. SINGLE SEPARATION NF TYPE, DESIGNATED NO FOAM. 3 HP MOTOR MOTOR RATED AT 15,000 RPM. LAST USED ON FRUIT JUICE. SERIAL NUMBER 53-4661823. ... Learn More

CENTRIFUGE, DECANTER, ALFA LAVAL, MODEL SNX 314-B31, SANITARY STAINLESS STEEL, BOWL RATED FOR 3250 RPM. INCLUDES 20 HP V-BELT MAIN DRIVE VFD BACK DRIVE AND MOTORIZED SCROLL FOR C.I.P. UNITIZED ON STAINLESS STEEL STAND, INCLUDES CONTROLS, SCROLL HOLDER, AN... Learn More

BIRD DECANTER CENTRIFUGE, 24" X 72" MILD STEEL, SINGLE CONTOUR UNIT, 8 CYLINDER, STANDARD FLOW UNIT. UNIT HAS A 80:1 GEARBOX, HARD SURFACED SCROLL WITH TILES, NO MOTOR BUT REQUIRES 75 HP MOTOR. ... Learn More

BIRD DECANTER CENTRIFUGE, 24" X 72", MILD STEEL, SINGLE CONTOUR UNIT, 8 CYLINDER, STANDARD FLOW UNIT. UNIT HAS A 80:1 GEARBOX, HARD SURFACED SCROLL WITH TILES AND HAS NO MOTOR BUT REQUIRES A 75 HP. ... Learn More

BIRD DECANTER CENTRIFUGE, 24" X 86" CARBON STEEL WITH STELLITE HARD SURFACED SCROLL AND COMPLETE WITH A 150 HP RELIANCE V-BELT MAIN MOTOR DRIVE, PANCAKE GEARBOX. LB NUMBER 3029, 2250 RPM AND USED SIX MONTHS ONLY WITH A LIKE NEW CONDITION, NEW 1979.... Learn More

CENTRIFUGE, DECANTER, BIRD, 32" X 50", MILD STEEL, CONTOUR BOWL, ***PARTS ONLY*** ... Learn More

BIRD DECANTER CENTRIFUGE, 32" x 50", WITH ALL WETTED PARTS BEING 304 STAINLESS STEELL. THE UNIT IS A 15/3 DEGREE BOWL CONTOUR, 5" SINGLE LEAD CONVEYOR, IS EQUIPPED WITH A 75 HP V-BELT MAIN MOTOR DRIVE, GEAR BOX WITH TORQUE ARM REDUCER, 80:1 RATIO, WAS NEW... Learn More

BIRD DECANTER CENTRIFUGE, 40" X 60", 304 STAINLESS STEEL, 15/3 DEGREE CONTOUR BOWL, 5" SINGLE LEAD SCROLL, 1400 MAX RPM ON BASKET, "FIRST STAGE", SERIAL NUMBER LB1424. UNIT IS LESS THE MOTOR.... Learn More

(2) BIRD DECANTER CENTRIFUGE, 40" X 60", 304 STAINLESS STEEL, 15/3 DEGREE CONTOUR BOWL, 5" SINGLE LEAD SCROLL, 116:1 GEAR BOX (MODEL #SA-60-5N4). UNIT COMPLETE WITH 100 HP MOTOR THROUGH V-BELT DRIVE, COMPLETE WITH SOME LUBRICATION SYSTEM, SERIAL NUMBERS L... Learn More

(3) BIRD DECANTER CENTRIFUGE, 40" X 60", 304 STAINLESS STEEL, 15/3 DEGREE CONTOUR BOWL, 5" SINGLE LEAD SCROLL, 62:1 GEAR BOX (MODEL #SA-56-21N1). UNIT COMPLETE WITH 100 HP MOTOR THROUGH V-BELT DRIVE, COMPLETE WITH SOME LUBRICATION SYSTEM AND SERIAL NUMBER... Learn More

(2) BIRD 40" X 60" DECANTER CENTRIFUGE BOWL, STAINLESS STEEL CONTACT PARTS, INCLUDES SCROLLS AND BOWLS . UNITS APPEAR TO BE IN GOOD CONDITION. ... Learn More

BIRD DECANTER CENTRIFUGE, 40" X 60", CARBON STEEL CONTACT PARTS, 15/3 DEGREE CONTOUR BOWL, 5" SINGLE LEAD SCROLL, 800 MAX RPM ON BASKET, "FIRST STAGE", SERIAL NUMBER LB1117. UNIT IS LESS THE MOTOR.... Learn More

(4) CENTRIFUGE, DECANTER, BIRD 40" X 60", SOLID BOWL TYPE, WITH 15/3 DEGREE CONTOUR CONFIGURATION. STAINLESS STEEL CONTACT SURFACES. CENTRIFUGE DRIVEN BY 39:1 MODEL SA-57 GEARBOX AND 125 HP 3/60/460V 1185 RPM MOTOR. BOWL HAS 6" PITCH SINGLE LEAD HARD SURF... Learn More

CENTRIFUGE, DECANTER, BIRD, 6" x 12" WITH 10 DEG CONTOUR BOWL. UNIT IS 316 S/ST CONTACT PARTS, SOLID BOWL W/MAX OF 6000 RPM W/VAPOR-TITE PRESSURE DISCHARGE. HAS DESIGN TEMP OF 180 DEG F MAX, PRESSURE RATING IS ATOMOSPHERIC. UNIT COMPL W/5 HP MAIN MOTOR DR... Learn More

(2) CENTRIFUGE, DECANTER, BIRD, 6" x 12" WITH 10 DEG CONTOUR BOWL. UNIT IS ALLOY 20 CONTACT PARTS, SOLID BOWL WITH MAX OF 6000 RPM. UNIT COMPLETE WITH VARI-SPEED MAIN MOTOR DRIVE 3 HP, 220/440 VOLT. INCLUDES GEARBOX/SCROLL RATIO 100:1. UNIT IN EXCELLENT C... Learn More

DELAVAL DECANTER, MODEL NX 314-31G, 14" X 34" BOWL, ALL STAINLESS STEEL CONTACT, INCLUDING THE TOP COVER WHICH HAS BEEN PAINTED. THE BOWL IS RATED FOR 3,250 RPMS, DRIVEN BY 15 HP V-BELT MAIN DRIVE, AND HAS A STATIONARY PLANETARY GEAR BOX WITH TORQUE ARM R... Learn More

CENTRIFUGE, DECANTER, FLOTTWEG, 9" x 25", HORIZONTAL SOLID BOWL WITH TYPE 316 STAINLESS STEEL CONTACT PARTS. UNIT IS MODEL Z23-3/401, S/N 900778 WITH MAX BOWL SPEED OF 6,071 RPM COMPLETE WITH 15 HP 220/440 VOLT B-BELT DRIVE. UNIT MFG NEW 1989, PURCHASED T... Learn More

HUMBOLT-WEDAG DECANTER CENTRIFUGE, MDL B-3 WITH ALL WETTED PARTS BEING CARBON STEEL. UNIT HAS 100 HP V-BELT MAIN DRIVE, 30 HP VISCOTHERM BACK DRIVE, BOWL MEASURES 25" x 100" RATED FOR 2700 RPM, LAST RUNNING MUNICIPAL WASTE WATER. EXCELLENT CONDITION.... Learn More

(2) KHD HUMBOLT WEDAG DECANTER CENTRIFUGES, TYPE S3-1-01, 316 STAINLESS STEEL CONSTRUCTION, MAX BOWL SPEED 2200 RPM WITH A 27.75 HP/18.5 KW-220/440 VOLT-60 CYCLE- 3PH MAIN DRIVE MOTOR. THE BOWLS ARE 530MM IN DIA., COMPLETE WITH GEARBOX, A 10 HP VISCOTHERM... Learn More

(2) PIERALISI DECANTER CENTRIFUGES, MODEL BABY 11, WITH ALL WETTED PARTS BEING STAINLESS STEEL. THE BOWLS MEASURE 9" X 29.9", ARE RATED FOR 5200 RPM'S, PRODUCING 3500 G'S, WITH A HYDRAULIC CAPACITY OF 4,000 LITERS/HOUR. THEY HAVE WEAR PROOF AND OVERLOAD P... Learn More

CENTRIFUGE, DECANTER, SHARPLES, MODEL P1000, 316 S/ST, CONICAL TYPE BOWL, HARD SURFACED SCROLL, 20 HP BOWL DRIVE, 5 HP VARI-SPEED BACK DRIVE WITH GEARBOX, VIBRATION ISOLATORS, FEED PIPE, ON BASE WITH DISCHARGE CHUTES. ... Learn More