Press

(2) ARBOR #3 MANUAL PRESS. UNIT HAS ADJUSTABLE BASE, LAST USED PROCESSING COSMETICS.... Learn More

KOMLINE SANDERSON UNIMAT BELT FILTER PRESS, MODEL GMD-2/0. THIS UNIT IS A COMPLETE, 2 METER WIDE, STAINLESS STEEL PRODUCT CONTACT PART BELT PRESS. UNIT FEATURES PNEUMATICALLY CONTROLLED BELT TRACKING DEVICE. PRESS FEATURES 1 HP, DC FEEDER BELT DRIVE AND 2... Learn More

PCP (PROIPAFISA) BELT PRESS, MODEL 2500/91, 2.5 METER BELT WIDTH. ALL WETTED PARTS ARE SANITARY STAINLESS STEEL. THE PRESS IS EQUIPPED WITH WAUKESHA INFEED PUMP WITH A 15 HP VARI-SPEED DRIVE, HYDRAULIC BELT TENTIONING AND ROLL ADJUSTMENT WITH HYDRAULIC DR... Learn More

(6) BRIQUETTING PRESS, MODEL DH500-28 X 27 X 2, TWIN ROLL BRIQUETTER, EACH ROLL MEASURES 28" DIA. X 27" FACE, DRIVEN BY 350 HP, 460 VOLT, 1750 RPM MAIN MOTOR WITH FOOTE-JONES VARI-SPEED REDUCER. INCLUDES HYRAULIC PUMP & LUBE SYSTEM & CONTROLS. RATED FOR A... Learn More

HEATED HYDRAULIC PRESS, PASADENA HYDRAULICS, MODEL S20RL3618S- 2HBWO-X-MS7-G, SERIAL NO. 0-0023, WITH 18" X 36" PLATENS, 26.53 KW HEATER, 1-1/2 HP HYDRAULIC OIL PUMP. (2) 3" DAYLIGHT SPACES. 4 POST WITH SINGLE 4" RAM.... Learn More

PRESS, PLATEN, 10" x 10" WITH 8" RAM, 9" DAYLIGHT. OVERALL DIMENSIONS ARE 2' H x 15" x 6' FRAME. UNIT DRIVEN BY 3 HP DRIVE. PRESS ONLY.... Learn More

(2) PRESS, PLATEN, ATLAS PACIFIC JUICE PRESS, 48" x 48" PLATEN HYDRAULICALLY ACTUATED WITH PNEUMATIC BLADDER. AUTOMATIC ADVANCING POLYPROPYLENE BELT FOR PULP DISCHARGE. PRESS IS ALL SANITARY STAINLESS STEEL CONTACT PARTS, INCLUDES 10' x 43" AGITATED LOADI... Learn More

PRESS, PLATEN, JUICE, STAINLESS STEEL, HYDRAULIC, 28" x 28". ... Learn More

PRESS, RIETZ, MODEL RVP-60K, STAINLESS STEEL PRODUCT CONTACT PARTS. WITH 60 HP MAIN MOTOR DRIVE THRU GEARBOX. S/N RVP-710304.... Learn More

BELOIT JONES MODEL P-225 PRESSMASTER, VERTICAL SCREW PRESS, COMPLETE WITH VIBRATORY SHAKER DISCHARGE. UNIT HAS STAINLESS STEEL CONTACT PARTS. GOOD CONDITION. SERIAL NO. P-485.... Learn More

BELOIT JONES MODEL P-200, PRESSMASTER, COMPLETE WITH VIBRATORY SHAKER DISCHARGE. UNIT HAS STAINLESS STEEL CONTACT PARTS AND IS OFFERED COMPLETELY RECONDITIONED WITH NEW LINER SCREENS, NEW MAIN BEARINGS, REBUILT DELROYD GEARBOX, NEW BUSHINGS, SEALS AND WEA... Learn More

PRESS, SCREW, BELOIT JONES MDL P-100 PRESSMASTER, TYPE 2510. PRESS COMPLETE WITH VIBRATORY SHAKER DISCHARGE. UNIT HAS TYPE 316 STAINLESS STEEL CONTACT PARTS. PRESS IS OFFERED COMPLETELY RECONDITIONED WITH NEW LINER SCREENS, NEW MAIN DRIVE BEARINGS, BUSHIN... Learn More

(7) BELOIT JONES MODEL P-300 PRESSMASTER, COMPLETE WITH VIBRATORY DISCHARGE. UNIT HAS ALL STAINLESS STEEL CONTACT PARTS, PNEUMATIC CONE. UNIT HAS 40 HP DRIVE. ... Learn More

BELOIT JONES MODEL P-300 PRESSMASTER, COMPLETE WITH VIBRATORY DISCHARGE. UNIT HAS ALL STAINLESS STEEL CONTACT PARTS, PNEUMATIC CONE. OFFERED LESS DRIVE MOTOR.... Learn More

BELOIT JONES MODEL P-40 PRESSMASTER, SCREW PRESS, VERTICAL, STAINLESS STEEL CONTACTS. REPORTED TO BE IN GOOD CONDITION.... Learn More

JONES HORIZONTAL SCREW PRESS, MODEL 4225, ALL WETTED PARTS BEING 304 STAINLESS STEEL. THE UNITS ARE EQUIPPED WITH 50 HP MAIN DRIVES, HYDRAULIC CONE MECHANISM, STAINLESS STEEL MAIN AND BACK-UP SCREENS, COVERS, DISCHARGE, DRAINAGE PAN, UNITIZED. IS IN EXCEL... Learn More

JONES SCREW PRESS, MODEL P-125, CARBON STEEL. UNIT HAS TOP INLET, CONE BOTTOM, LESS BASE, NOT COMPLETE. PARTS MACHINE ONLY. ... Learn More

JONES VERTICAL SCREW PRESS, SERIES 100S, STAINLESS STEEL CONTACTS, COMPLETE WITH 10 HP DRIVE. PREVIOUSLY USED AT GRAPE JUICE PROCESSING FACILITY, RUNNING AT A RATE OF 15 TPH. INCLUDES 6" DIA. LIQUID DISCHARGE AND 12" WIDE DISCHARGE CHUTE. APPEARS TO BE IN... Learn More

JONES VERTICAL SCREW PRESS, MDL P-225, TYPE 2512, WITH ALL WETTED PARTS BEING STAINLESS STEEL. UNIT EQUIPPED WITH 20 HP MIAN DRIVE THRU GEARBOX, FRAC HP, DRIVE ON THE SHAKER DISCHARGE ASSEMBLY AND AIR CYLINDER TO OPERATE THE SOLIDS DISCHARGE CONE. INCLUDE... Learn More

RIETZ CONTINUOUS HORIZONTAL SCREW PRESS, MDL. RSP 16-K2, THE PRESS WAS PREVIOUSLY EQUIPPED WITH A 25 HP U.S. VARI-SPEED MAIN DRIVE THROUGH HEAVY DUTY GEAR BOX, A 7.5 HP VARI-SPEED DRIVE ON THE ROTATING CONE, S/ST COVER, S/ST MAIN SCREENS, AND S/ST BACK UP... Learn More

SCREW PRESS, RIETZ, 12" HORIZONTAL, MODEL RSP-12-K2, WITH 304 STAINLESS STEEL CONTACT PARTS, 10 HP VARI SPEED MOTOR AND 1 HP VARI SPEED CONE DRIVE. CONE IS PNEUMATICALLY ACTUATED FOR BACK PRESSURE ON PRESS. PRESS IS COMPLETE, MOUNTED ON STAND, AND OFFERED... Learn More

SCREW PRESS, MANUFACTUERED BY STORD BARTZ, MODEL# BS-41FK, MACHINE NUMBER 138, TWIN SCREW, 12" DIAMETER X 10' LONG SCREWS, CARBON STEEL CONSTRUCTION, DRIVEN BY 40 HP DRIVE.... Learn More

MANESTY BETA PRESS ROTARY TABLET PRESS,23 STATION, PRE-COMPRESSION 6.5 TON TOTAL COMPRESSION PRESSURE, 7/16" MAX TABLET DIA., 11/16" MAX DEPTH OF FILL, RATED UP TO 2160 TABLETS/MIN. KEYED UPPER PUNCH GUIDES, PROVISION FOR FORCE FEED WITH HOPPER. ... Learn More

MANESTY BETA PRESS ROTARY TABLET PRESS, 16 STATION, KEYED UPPER PUNCH GUIDE, SINGLE SIDED, FORCE FEEDER WITH HOPPER, RECOMPRESSION, 6.5 TON TOTAL COMPRESSION PRESSURE, 5/8" MAXIMUM TABLET DIAMETER, 11/16" MAXIMUM DEPTH OF FILL, RATED UP TO 1500 TABLETS PE... Learn More

MANESTY BETA PRESS ROTARY TABLET PRESS, 16 STATION, KEYED UPPER PUNCH GUIDE, SINGLE SIDED, FORCE FEEDER WITH HOPPER, RECOMPRESSION, 6.5 TON TOTAL COMPRESSION PRESSURE, 5/8" MAXIMUM TABLET DIAMETER, 11/16" MAXIMUM DEPTH OF FILL, RATED UP TO 1500 TABLETS PE... Learn More

WILLMES MODEL TP-8 BLADDER PRESS, 8,000 LITER CAPACITY. STAINLESS STEEL. CAPACITY IN TONS 8.8T. VARIABLE FULLY AUTOMATIC CONTROL ADJUSTABLE TO ANY VARIETY OF GRAPES. 4 HP DRIVE. LAST USED FOR PRESSING GRAPES. GOOD CONDITION. ... Learn More

PRESS, PLATEN, JUICE, STOLL III, S/ST, AUTO, 24" X 24", SANITARY STAINLESS STEEL WETTED PARTS, WITH A 20 HP HYDRAULIC POWER PLANT, ELECTRICAL CONTROLS, STAINLESS STEEL FEED HOPPER, STAINLESS STEEL SCREW FEED ELEVATOR, UNITIZED.... Learn More

BELT PRESS, 60" WIDE X 15' LONG, MANUFACTURED BY AMOS, MODEL AP 1500, STANLESS STEEL FRAME WITH S/ST AND PLASTIC ROLLERS & TOP MOUNTED SPRAY BAR. RATED FOR APPROXIMATELY 14 TONS/HR ON APPLES. INCLUDES PNEUMATICALLY OPERATED SCRAPER KNIFE MECHANISM. ROLLER... Learn More

TABLET PRESS, SINGLE STATION, MANUFACTURED BY STOKES, MODEL# 511-7, INCLUDES VARI-SPEED CONTROL BOX. MOUNTED IN GLASS/PLASTIC ENCLOSURE. APPEARS TO BE IN GOOD CONDITION.
... Learn More

BELT PRESS, EIMCO, "EXPRESSOR", 26" WIDE BELT, WITH ALL WETTED PARTS BEING SANITARY STAINLESS STEEL. THE BELT SCRAPER BLADES ARE POLYPROPYLENE, STEEL ROLLS ARE COVERED WITH FOOD GRADE ELASTOMER. COMPLETE WITH 15 HP HYDRAULIC DRIVE, EACH BELT TENSIONED BY ... Learn More

BELT PRESS, 16" WIDE X 10' LONG, EIMCO "EXPRESSOR" PRESS, STAINLESS STEEL FRAME, HYDRAULICALLY DRIVEN, SERIAL # 82250-01B. INCLUDES SCRAPER BLADE CONNECTION ON END, STAINLESS STEEL COLLECTION PANS UNDER ROLLERS. MOUNTED ON I- BEAM FRAMES WITH CASTERS, HEA... Learn More

(2) ANDRITZ BELT PRESS, 1.5 METER WIDE, MODEL CPF-60SM, FRAMES HAVE BEEN STRIPPED, CLEANED AND REPAINTED. COMPONENTS, MOTORS, TEC. HAVE BEEN TESTED AND CONFIRMED WORKING. VERY GOOD CONDITION. ... Learn More

(2) BLADDER PRESS, WILLMES UNIVERSAL PRESS, MODEL UP4000, STAINLESS STEEL CONSTRUCTION, 4000 LITER LOADING CAPACITY (40 HECTO LITERS). COMPLETE WITH FULLY AUTOMATIC PROGRAMMABLE CONTROLS, AXIAL FED, AND HAS (4) VERTICAL JUICE DRAINAGE SCREENS WITH 26.9 SQ... Learn More

BRIQUETTER, BEPEX MODEL NUMBER 60/84-MS-20.5 X 9, ALL STAINLESS STEEL CONTACT PARTS, ROLL DIMENSIONS 20.5" DIAMETER X 9" FACE, 30 HP MOTOR WITH ROLL SPEED OF 26 RPM, DOWN SCREW FEEDER WITH 10 HP MOTOR AND VARIABLE FROM 20 RPM TO 108 RPM. ROLL POCKETS ARE ... Learn More

(8) TOFU BLOCK FORMER, CONSISTS PLATEN PRESS, STAINLESS STEEL FRAME WITH 33" X 24" S/ST TABLE, PNEUMATICALLY OPERATED, MAX 145 PSI. ALSO INCLUDES S/ST PANS MEASURING 15" X 24" X 5" DEEP WITH (4) 1" DIAMETER PERFORATIONS AND PERFORATED PLATES THAT FIT WITH... Learn More

(2) SEPARATOR, CONSISTS OF (5) SMALL SCREW PRESSES, 6" DIAMETER X 24" LONG BARRELS WITH INTERNAL TAPERED SCREWS AND SCREENS, EACH BARREL HAS 1-1/2" DIA. FEED INLET, LEADING TO PRESSING SECTION, PRODUCT IS SQUEEZED BY SCREW THROUGH TAPERED SCREW & SCREEN, ... Learn More

VINCENT SCREW PRESS, STAINLESS STEEL, HORIZONTAL. MODEL CP-10, 10 HP MOTOR DRIVE. MAX CAPACITY 8,000 LBS/HR, TYPICAL SCREW RPM 17-25 RPM. 11' LONG X 3' HIGH X 2' WIDE. ... Learn More

(3) SCREW PRESS, MANUFACTURED BY RIETZ, MODEL NUMBER RSP-16, STAINLESS STEEL CONSTRUCTION, COMPLETE WITH DRIVE. PREVIOUSLY USED IN FRUIT PROCESSING OPERATION. GOOD CONDITION.... Learn More

SCREW PRESS, MANUFACTURED BY VINCENT, MODEL NUMBER PR-16K2, STAINLESS STEEL CONTACTS, COMPLETE WITH MAIN DRIVE THRU GEARBOX. ALSO INCLUDES CONE DRIVE THRU GEARBOX. PREVIOUSLY USED IN FRUIT PROCESSING OPERATION. OFFERED CLEANED, BASE PAINTED AND IN GOOD WO... Learn More

FETTE TABLET PRESS, 43-STATION, MODEL PT 2080, MAX TABLET DIAMETER 13 MM, DIE DIAMETER 24 MM, FILLING DEPTH MAX 18 MM, TABLET THICKNESS MAX 8.5 MM, RATED BETWEEN 12,900 - 296,700 TABLETS/HR. REPORTED TO BE IN VERY GOOD CONDITION.
... Learn More