<![CDATA[Mining Processing Featured Equipment]]> http://www.machineryandequipment.com/mining-processing-featured-equipment Thu, 17 May 2012 05:41:29 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[MILL, ROLLER, RAYMOND, MDL 5057 HIGH-SIDE, 1965]]> http://www.machineryandequipment.com/mill-roller-raymond-mdl-5057-high-side-1965.html RAYMOND ROLLER MILL, MODEL 5057 HIGH-SIDE, COMPLETE WITH WHIZZER SEPARATOR AND 10 HP VARI-DRIVE. 100 HP MAIN MOTOR, EXHAUST FAN WITH 100 HP, STILL INSTALLED WITH DUCT WORK, CYCLONE, AND CONTROLS. THE RING AND ROLLS LOOK TO BE IN GOOD CONDITION. MILL WAS REPORTEDLY REBUILT IN 1999 AND USED VERY LITTLE ON LIME PRODUCT. SERIAL NUMBER 65606. NEW IN 1965.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[DRYER, ROTARY, 5'6" X 26', C/ST, CEDARAPIDS, 4MM BTU/HR,]]> http://www.machineryandequipment.com/dryer-rotary-5-6-x-26-c-st-cedarapids-4mm-btu-hr.html ROTARY DRYER, 5'6" DIAMETER X 26' LONG, MANUFACTURED BY CEDARAPIDS. IT IS PORTABLE, MOUNTED ON A GOOSE NECK TRAILER; IT IS INSTALLED INSIDE THE PLANT AS A STATIONARY UNIT. CHAIN AND SPROCKET DRIVE WITH APPROXIMATELY 25 HP MOTOR. HAS A HAUCK BURNER MODEL SJL-4150EX-111-06-12-1-00 PART NUMBER 26170. HAS A COMBUSTION AIR FAN MODEL TBA 3625T6, S/N 91312. RATED AT 16,000 ACFM AT HIGH TEMPERATURE USING 28,000,000 BTU PER HOUR AND 2,200 CFM AT LOW TEMPERATURE USING 4,000,000 BTU PER HOUR. IT IS CONVENTIONAL INSIDE WITH LIFTERS RUNNING FULL LENGTH. ACCESSORY EQUIPMENT TO THE DRYER INCLUDES A DUMP HOPPER FOR FRONT END LOADING, 30" WIDE X 30' BELT CONVEYOR TO A FEED HOPPER, 18" X 15' DISCHARGE CONVEYOR TO A UNIVERSAL DOUBLE DECK SCREEN APPROXIMATELY 4' X 8'. VERY GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[PRESS, BRIQUETTING, DH500-28-72X2, 350 HP, (6)]]> http://www.machineryandequipment.com/press-briquetting-dh500-28-72x2-350-hp-6.html (6) BRIQUETTING PRESS, MODEL DH500-28 X 27 X 2, TWIN ROLL BRIQUETTER, EACH ROLL MEASURES 28" DIA. X 27" FACE, DRIVEN BY 350 HP, 460 VOLT, 1750 RPM MAIN MOTOR WITH FOOTE-JONES VARI-SPEED REDUCER. INCLUDES HYRAULIC PUMP & LUBE SYSTEM & CONTROLS. RATED FOR APPROXIMATELY 50 TPH. POCKETS MEASURE 1.8" X 1.7" X 1.3" DEEP. NEW IN 1997 AND REPORTED TO BE IN GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[DUST COLLECTOR, BAG HOUSE, 15,000 CFM, RAY JET, 2880 SQ.FT.]]> http://www.machineryandequipment.com/dust-collector-bag-house-15-000-cfm-ray-jet-2880-sq-ft.html BAG HOUSE DUST COLLECTOR, RAY JET, MODEL 9MW-40, RATED AT 2880 SQ.FT. BAG SURFACE AREA, APPROXIMATELY 15,000 CFM. PULSE TYPE CLEAN OUT, ROTARY AIR LOCK DISCHARGE VALVES, ALL DUCT WORK, LADDERS, ETC. EQUIPPED WITH BLOW OUT PANELS. LAST USED ON COAL DUST.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[MILL, ROLLER, RAYMOND, 6658, HI-SIDE, AIR HEATER,]]> http://www.machineryandequipment.com/mill-roller-raymond-6658-hi-side-air-heater.html RAYMOND ROLLER MILL, MODEL 6658 HIGH SIDE. COMPLETE WITH 200 HP 460 VOLT, 880 RPM, EXPLOSION PROOF MAIN MOTOR, DOUBLE WHIZZER SEPARATOR WITH VARI-DRIVE, CHAIN DRIVEN ROTARY FEEDER WITH MODEL 50 CONTROLLER. NATURAL GAS DIRECT FIRED AIR HEATER RATED AT 5,300,000 BTU PER HOUR, GAS FIRED. COMPLETE SYSTEM STILL INSTALLED INCLUDING 6 TON FEED HOPPER, CYCLONE COLLECTOR, DUCT WORK, ALL ELECTRICALS AND CONTROL PANEL. SERIAL NUMBER 77124, APPROXIMATELY 600 HOURS ONLY ON HOUR METER.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[SILO, 100 TON, 15' DIAMETER X 56' HIGH, CONE BOTTOM,]]> http://www.machineryandequipment.com/silo-100-ton-15-diameter-x-56-high-cone-bottom.html SILO, 100 TON, 15' DIAMETER X 56' HIGH, WITH 60 DEGREE CONE BOTTOM, AND STEEL SKIRT. PNEUMATIC CONVEYING SYSTEM AT DISCHARGE, BIN VENT DUST COLLECTOR ON TOP, HEAVY DUTY DESIGN, RATED AT 80 LBS PER CUBIC FOOT.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000 <![CDATA[CRUSHER, IMPACT, 1000 HP, 60" X 80", WILLIAMS, REVERSIBLE,]]> http://www.machineryandequipment.com/crusher-impact-1000-hp-60-x-80-williams-reversible.html WILLIAMS REVERSIBLE IMPACT CRUSHER, 60" DIA X 80" LONG ROTOR, SWING TYPE SLEDGE HAMMERS. WILLIAMS MODEL NUMBER K, TYPE 680. PREVIOUSLY HAD 1000 HP, 4000 V, 712 RPM, 3 PHASE, 60 CYCLE A/C MOTOR. FEED OPENING 27" X 80", RATED AT 1000 TONS PER HOUR ON LIMESTONE, LAST USED AS SECONDARY CRUSHER. UNIT IS EQUIPPED WITH HYDRAULIC OPENING MECHANISM TO SPLIT CHAMBER AND CHANGE OUT PARTS. UNUSED HAMMERS ALSO AVAILABLE. SERIAL NUMBER 15257.
$0.00
]]> Thu, 17 May 2012 05:41:29 +0000