<![CDATA[VIEW ALL INVENTORY]]> http://www.machineryandequipment.com/view-all-inventory-1 Thu, 17 May 2012 05:37:53 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[DETECTOR, METAL, LOMA, SUPERSCAN, 14" X 4",]]> http://www.machineryandequipment.com/detector-metal-loma-superscan-14-x-4.html METAL DETECTOR, MANUFACTURED BY LOMA, MODEL "SUPERSCAN", 14" WIDE X 4" HIGH APERATURE, COMPLETE WITH CONTROLS. 111.9 kHz FREQUENCY, 115 VOLT, 60 CYCLE, ELECTRIC, SERIAL# 275973. LAST USED IN TRAY DINNER LINE AT A CAPACITY OF 200 TRAYS/MIN. NEW IN DEC. OF 1987. LESS CONVEYOR. VERY GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MILL, DISINTEGRATOR, RIETZ, MDL RP18-K133, S/ST, 60 HP,]]> http://www.machineryandequipment.com/mill-disintegrator-rietz-mdl-rp18-k133-s-st-60-hp.html RIETZ MODEL RP18-K133, 18" DIAMETER DIRECT DRIVEN DISINTEGRATOR, STAINLESS STEEL CONTACT, FLANGED 18" DIAMETER INFEED HOPPER, OPEN THROAT RECTANGULAR DISCHARGE, 5/8" SCREEN, 60 HP 1800 RPM DIRECT DRIVE MOTOR, STAINLESS STEEL ANGLED BASE. NEW IN 2005.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[TANK, 200 GALLON, C/ST, HORIZONTAL, 5,500 PSI,]]> http://www.machineryandequipment.com/tank-200-gallon-c-st-horizontal-5-500-psi.html HIGH PRESSURE TANK, BULLET DESIGN, CNG ONLY, CARBON STEEL CONSTRUCTION, RATED FOR 5,500 PSI @ -40 DEG. F, 4,125 PSI @ 200 DEG. F, MEASURES 16" DIAMETER X 21' LONG, DISHED ENDS, NEW IN 1995. CERTIFIED BY NPS, NATIONAL BOARD# 4393.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[BOILER, 100 HP, BRYAN, MODEL RV400-W, 125 PSI, UNUSED,]]> http://www.machineryandequipment.com/boiler-100-hp-bryan-model-rv400-w-125-psi-unused.html BRYAN BOILER, MODEL RV400-W, RATED FOR 100 HP, 160 PSI, WATERTUBE TYPE BOILER, NATURAL GAS-FIRED, FORCED DRAFT WATER BOILER, 4000/2000 MBH INPUT, 3200 MBH OUTPUT, 490 SQ. FT. HEATING SURFACE AREA, NEW IN 1998. NEVER PUT INTO SERVICE. VERY GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PUMP, MOYNO, 15 HP, S/ST, SEEPEX, SIZE 70,]]> http://www.machineryandequipment.com/pump-moyno-15-hp-s-st-seepex-size-71.html PUMP, MOYNO-STYLE, MANUFACTURED BY SEEPEX, STAINLESS STEEL CONTACTS, 8" IN/6" OUT, SIZE 70, RANGE BN, PRESSURE STAGE 12, COMMISSION# 88131, RATED FOR 115 GPM, 125 RPM, 59.47 PSI. DRIVEN BY 15 HP 230/460, 1760 RPM, 3/60 SIEMENS DRIVE.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[DRYER, TRAY, VACUUM, FREEZE, LYOPHLIZER, HULL, 200 SF, S/ST]]> http://www.machineryandequipment.com/dryer-tray-vacuum-freeze-lyophlizer-hull-200-sf-s-st.html HULL LYPHOLIZER SYSTEM, INCL A 200 SQ/FT SHELF AREA STAINLESS STEEL FREEZE CHAMBER, 250 SQ/FT ALL STAINLESS STEEL CONSENDING UNIT, COMPL REFRIGERATION SYSTEM AND TWIN KINNEY VACUUM PUMPS TO COMPLETE THE PACKAGE. INCLUDED ARE MANY SPARE PARTS AND REPLACEMENT PARTS. UNIT WAS IN OPERATION CONSISTENTLY OVER THE LAST 10 YRS. EXCELLENT CONDITION, INCL AUTO-STOPPERING CAPABILITIES, S/ST CONTACT PARTS, INCL VALIDATION. NEW IN 1997.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, AGITATOR, 1/2 HP, PFAUDLER, S/ST, X-1749, (11),]]> http://www.machineryandequipment.com/mixer-agitator-1-2-hp-pfaudler-s-st-x-1749-11.html (11) PFAUDLER TOP ENTERING TANK AGITATORS, MODEL X-1749, COMPLETE WITH 1.5 HP, 230/460 VOLT DRIVE MOTOR. MIXER FEATURES 2" DIAMETER SOLID STAINLESS STEEL SHAFT, 7'4" LONG WITH 4" DIAMETER 4 BLADE PROPELLOR BLADE AT BOTTOM. MIXING UNIT HAS STUFFING BOX TYPE SEAL, 1.5 HP OPEN BBFP MOTOR. AGITATOR DRIVE IS FLANGE MOUNTED WITH 15" X 15-1/8" BOLT PATTERN GEARED FOR 1200 RPM INPUT, 37 RPM OUTPUT.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PUMP, CENTRIF, 20 HP, GALIGHER, R/L, (2)]]> http://www.machineryandequipment.com/pump-centrif-20-hp-galigher-r-l-2.html (2) PUMP, MANUFACTURED BY GALIGHER, RUBBER-LINED, DRIVEN BY 20 HP, 230/460, 3/60HZ MOTOR. USED FOR ONLY 3 MONTHS AND IN VERY GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, AGITATOR, 10 HP, CHEMINEER, 4HTD10, S/ST,]]> http://www.machineryandequipment.com/mixer-agitator-10-hp-chemineer-4htd10-s-st.html MIXER, AGITATOR, CHEMINEER MODEL 4HTD10. COMPLETE WITH 10 HP, 1150 RPM INPUT, 45 RPM OUTPUT, 3/60/230-460 VOLT MOTOR. AGITATOR HAS (2) 4 BLADE PADDLES, 45 DEGREE PITCH, TOP 4 BLADES 50" DIAMETER, 10" WIDE. BOTTOM 4 BLADES 35" DIAMETER, 8" WIDE. 8' BETWEEN SETS OF BLADES. 3" DIAMETER STAINLESS STEEL SHAFT, 14' LONG. SERIAL NO 1-70731-1.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PUMP, POSITIVE, WAUKESHA, MDL 030, S/ST, 1.5 HP, 1.5" IN/OUT]]> http://www.machineryandequipment.com/pump-positive-waukesha-mdl-030-s-st-1-5-hp-1-5-in-out-2.html WAUKESHA PUMP, SIZE 030, STAINLESS STEEL CONTACTS, 1-1/2" IN/OUT DRIVEN BY 1-1/2 HP, 230/460 VOLT, 1725 RPM, 3/60 HZ MOTOR THROUGH VARI-SPEED DRIVE, UNITIZED ON STAINLESS STEEL BASE WITH CASTERS AND PULL HANDLE. SERIAL NUMBER 11619 SS. GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PRESS, BRIQUETTING, K.R. KOMAREK, M/N DH-400-20.5]]> http://www.machineryandequipment.com/press-briquetting-k-r-komarek-m-n-dh-400-20-5.html BRIQUETTER, K.R. KOMAREK, MODEL DH-400-20.5, BRIQUETTING PRESS. 150 TON ROLL FORCE, 20.5" DIAMETER, 4 POCKETS WIDE BRIQUETTES MEASURE 1.224" WIDE X 2.0" LONG X 0.805" DEEP, VOLUME 20 CC, SEGMENTED ROLLS, TYPE M-2 TOOL STEEL. COMPLETE WITH 100 HP, 1185 RPM, 440/3/60 TEFC DRIVE MOTOR THRU GEAR REDUCER WITH 72.48/1 RATIO. 15 HP MOTOR ON FEEDER. DESIGNED FOR 15,000#/HOUR ON STEEL WASTE, LAST USED ON COAL FINES. S/N 21281.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PRESS, BRIQUETTING, COAL, 60 TONS/HR, UNUSED (2)]]> http://www.machineryandequipment.com/press-briquetting-coal-60-tons-hr-unused-2.html (2) BRIQUETTER, 4 ROLLS/MACHINE, DOUBLE SHAFT, BRIQUETTING PRESSES, MANUFACTURED BY YAN TAI SAN HE CO., CHINA. MODEL MQJ-50, 110 KW, 460V, 3 PH, 60 HZ, 882 RPM MAIN MOTOR. EACH ROLL IS 1006 MM DIA X 586 MM FACE. BRIQUETTE IS OVAL AND 0.7 CU.IN. CAPACITY. EACH COMPLETE WITH HOPPER FEEDER WITH (4) VERTICAL AUGERS WITH 5 HP MOTOR. 10 TO 13 RPM ON ROLLS. HYDRAULIC POWER PACK, CYLINDERS ARE 1500 PSI. PURCHASED NEW IN 2007, NEVER INSTALLED. RATED AT 40-70 TONS/HOUR ON COAL FINES. COMPLETE SPECS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 75 CF, 304 S/ST, 30 HP, NEW, HD, S737762,]]> http://www.machineryandequipment.com/mixer-ribbon-75-cf-304-s-st-30-hp-new-hd-s737762.html NEW RIBBON MIXER, 75 CU.FT. WORKING CAPACITY, HEAVY DUTY, POLISHED 304 STAINLESS STEEL CONTACTS, 86" LONG X 42" WIDE X 47" DEEP, 1/4" SHELL THICKNESS, S/ST TROUGH WITH MIRROR INTERIOR FINISH. HINGED COVER WITH BACKREST, SAFETY GRATES. 5" SOLID S/ST SHAFT, 2" WIDE X 1/2" THICK OUTER RIBBON, 2-1/2" WIDE x 2/5" THICK INNER RIBBON. MIXER IS DRIVEN BY 30 HP GEARHEAD MOTOR THRU ROLLERCHAIN, RATED FOR 25 RPM RIBBON SPEED. MIXER HAS A 8" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 25-7/8" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 1 CF, 304 S/ST, 1 HP, NEW, STD,]]> http://www.machineryandequipment.com/mixer-ribbon-1-cf-304-s-st-1-hp-new-std-5.html NEW RIBBON MIXER, 1 CU.FT. WORKING CAPACITY, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 18" LONG X 11" WIDE X 13" DEEP, WITH MIRROR INTERIOR FINISH, 2.5mm SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 1-1/2" SOLID S/ST SHAFT, 1" WIDE X 1/4" THICK OUTER RIBBON, 1-1/4" WIDE x 1/4" THICK INNER RIBBON, 58 RPM RIBBON SPEED. MIXER IS DRIVEN BY 1 HP, GEARHEAD MOTOR THRU ROLLERCHAIN. MIXER HAS A 2-1/4" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 10" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 150 CF, 304 S/ST, 50 HP, NEW, HD,]]> http://www.machineryandequipment.com/mixer-ribbon-150-cf-304-s-st-50-hp-new-hd-3.html NEW RIBBON MIXER, 150 CU.FT. WORKING CAPACITY, HEAVY DUTY, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 106" L X 53" W X 58" D, WITH MIRROR INTERIOR FINISH, 1/5" SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 5-3/4" SOLID S/ST SHAFT, 2" WIDE X 1/2" THICK OUTER RIBBON, 3" WIDE x 2/5" THICK INNER RIBBON, 25 RPM RIBBON SPEED. MIXER IS DRIVEN BY 50 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 10" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 49-1/2" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 200 CF, 304 S/ST, 75 HP, HD, NEW,]]> http://www.machineryandequipment.com/mixer-ribbon-200-cf-304-s-st-75-hp-hd-new-1.html NEW RIBBON MIXER, 200 CU.FT. WORKING CAPACITY, HEAVY DUTY, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 116" L X 59" W X 64" D, WITH MIRROR INTERIOR FINISH, 6mm SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 6.18" SOLID S/ST SHAFT, 50mm WIDE X 12mm THICK OUTER RIBBON, 75mm WIDE x 10mm THICK INNER RIBBON, 22 RPM RIBBON SPEED. MIXER IS DRIVEN BY 75 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 10" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 48" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PRESS, SCREW, RIETZ, S/ST, RSP-16-K2,]]> http://www.machineryandequipment.com/press-screw-rietz-s-st-rsp-16-k2.html SCREW PRESS, MANUFACTURED BY RIETZ, MODEL NUMBER RSP-16, STAINLESS STEEL CONSTRUCTION, COMPLETE WITH DRIVE. PREVIOUSLY USED IN FRUIT PROCESSING OPERATION. GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 100 CF, 304 S/ST, 40 HP, NEW, HD,]]> http://www.machineryandequipment.com/mixer-ribbon-100-cf-304-s-st-40-hp-new-hd-3.html NEW RIBBON MIXER, 100 CU.FT. WORKING CAPACITY, HEAVY DUTY MODEL, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 96" L X 46" W X 51" D, WITH MIRROR INTERIOR FINISH, 6mm SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 5-1/4" SOLID S/ST SHAFT, 50mm WIDE X 12mm THICK OUTER RIBBON, 65mm WIDE x 10mm THICK INNER RIBBON, 26 RPM RIBBON SPEED. MIXER IS DRIVEN BY 40 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 8" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 23-1/2" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 2.5 CF, 304 S/ST, 2 HP, NEW, STD,]]> http://www.machineryandequipment.com/mixer-ribbon-2-5-cf-304-s-st-2-hp-new-std-3.html NEW RIBBON MIXER, 2.5 CU.FT. WORKING CAPACITY, POLISHED 304 STAINLESS STEEL CONTACTS, 26" L X 14" W X 18" DEEP, 3mm SHELL THICKNESS, S/ST TROUGH WITH MIRROR INTERIOR FINISH. HINGED COVER WITH BACKREST, SAFETY GRATES. 1-5/8" SOLID S/ST SHAFT, 1-1/2" W X 1/4" THICK OUTER RIBBON, 1-1/5" W X 1/4" THICK INNER RIBBON, 58 RPM RIBBON SPEED. MIXER IS DRIVEN BY 2 HP, GEARHEAD MOTOR THRU ROLLERCHAIN. MIXER HAS A 4" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 23" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 10 CF, 304 S/ST, 5 HP, NEW, STD,]]> http://www.machineryandequipment.com/mixer-ribbon-10-cf-304-s-st-5-hp-new-std-4.html NEW RIBBON MIXER, 10 CU.FT. WORKING CAPACITY, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 43" L X 22" W X 26" D, WITH MIRROR INTERIOR FINISH, 1/10" SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 2-1/2" SOLID S/ST SHAFT, 1-1/2" W X 1/4" THICK OUTER RIBBON, 1-1/2" W X 1/4" THICK INNER RIBBON, 55 RPM RIBBON SPEED. MIXER IS DRIVEN BY 5 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 5" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 31-3/4" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 15 CF, 304 S/ST, 10 HP, NEW, STD]]> http://www.machineryandequipment.com/mixer-ribbon-15-cf-304-s-st-10-hp-new-std-7.html NEW RIBBON MIXER, 15 CU.FT. WORKING CAPACITY, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 48" L X 25" W X 29" D, WITH MIRROR INTERIOR FINISH, 1/10" SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 2-1/2" SOLID S/ST SHAFT, 1-1/2" X 1/4" THICK OUTER RIBBON, 1-1/2" X 1/4" THICK INNER RIBBON, 46 RPM RIBBON SPEED. MIXER IS DRIVEN BY 10 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 5" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 31" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MILL, HAMMER, 18" X 18", C/ST, 15 HP, SCOTT, LUMP BREAKER,]]> http://www.machineryandequipment.com/mill-hammer-18-x-18-c-st-15-hp-scott-lump-breaker.html SCOTT HAMMERMILL, LUMP BREAKER, MANUFACTURED BY SCOTT, CARBON STEEL CONSTRUCTION, 3-PONT FIXED HAMMERS, ½" THICK, ON COMMON SHAFT, MODEL# CR18X18, SERIAL# 0807149, 18" X 18" FLANGED FEED OPENING. DRIVEN BY 15 HP, 1750 RPM, 230/460 VOLT, 3/60HZ MOTOR THRU GEAR REDUCER, 8.830:1 RATIO. UNUSED AND IN LIKE NEW CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[TANK, 250 GALLON, S/ST, JKT, WINE, GHIDI METALLI,]]> http://www.machineryandequipment.com/tank-250-gallon-s-st-jkt-wine-ghidi-metalli.html WINE FERMENTATION TANK, 1,000 LITER (APPROX. 250 GALLON), ALL STAINLESS STEEL CONSTRUCTION, DIMPLE JACKETED, MANUFACTURED BY GHIDI METALLI, INCLUDES FLOATING LID.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[TANK, 500 GALLON, S/ST, JKT, WINE, GHIDI METALLI,]]> http://www.machineryandequipment.com/tank-500-gallon-s-st-jkt-wine-ghidi-metalli.html WINE FERMENTATION TANK, 2,000 LITER (APPROX. 500 GALLON), ALL STAINLESS STEEL CONSTRUCTION, DIMPLE JACKETED, MANUFACTURED BY GHIDI METALLI, INCLUDES FLOATING LID.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[TANK, 1,000 GALLON, S/ST, JKT, WINE, GHIDI METALLI, (2)]]> http://www.machineryandequipment.com/tank-1-000-gallon-s-st-jkt-wine-ghidi-metalli-2.html (2) WINE FERMENTATION TANK, 4,000 LITER (APPROX. 1,000 GALLON), ALL STAINLESS STEEL CONSTRUCTION, DIMPLE JACKETED, MANUFACTURED BY GHIDI METALLI, INCLUDES FLOATING LID.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[CARTONER, ECONOCORP, MDL 6571, V-SYSTEM, NORDSEN GLUE,]]> http://www.machineryandequipment.com/cartoner-econocorp-mdl-6571-v-system-nordsen-glue.html ECONOCORP CARTONER, ECONOSEAL, MODEL# 6571, V-SYSTEM, PREVIOUSLY PLACING 12 OZ BAGS INTO CARTONS. INCLUDES NORDSEN HOT GLUE SYSTEM. NEW IN 2002 AND IN GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, TURBO, SCOTT, MODEL HSB 1460SS, S/ST, 14" X 60",]]> http://www.machineryandequipment.com/mixer-turbo-scott-model-hsb-1460ss-s-st-14-x-60.html SCOTT HSB TURBO MIXER, MODEL HSB 1460SS, HIGH SPEED BLENDER, STAINLESS STEEL CONSTRUCTION, CHAMBER MEASURES 14" DIAMETER X 60" LONG, INCLUDES 7" X 7" FLANGED FEED OPENING AND 7" X 7" FLANGED DISCHARGE. USED FOR TEST RUN ONLY. SERIAL# 0708155. NEW IN 2007. EXCELLENT CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[CONVEYOR, BELT, 16" X 30', INCLINED, CLEATED, TRUCK LOADER]]> http://www.machineryandequipment.com/conveyor-belt-16-x-30-inclined-cleated-truck-loader.html TRUCK LOADER, INCLINED BELT CONVEYOR, 16" WIDE X 30' LONG, CLEATED BELT, 2” HIGH CLEATS, MFG. BY RAPAT, ADJUSTABLE HEIGHT BY HANDCRANK WITH CABLE, APPROX. 15’ MAX HEIGHT, COMPLETE WITH DRIVE, UNITIZED ON FRAME W/ RUBBER TIRES, ALSO INCLUDES HITCH FOR TOWING. COMPLETE WITH 2-TON (125 CU. FT.) FEED HOPPER, 68” X 6’ X 5’ DEEP, PYRAMID SHAPED BOTTOM, W/ MANUAL SLIDE GATE VALVE, WITH FORKLIFT SLOTS. EXCELLENT CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[FEEDER, WEIGH, BELT, THAYER, 28" X 56", S/ST, MDL. L-20T,]]> http://www.machineryandequipment.com/feeder-weigh-belt-thayer-28-x-56-s-st-mdl-l-20t.html WEIGH BELT FEEDER, MFG. BY THAYER, 28" WIDE X 54" LONG, STAINLESS STEEL CONSTRUCTION, MODEL# L-20T, S/N 1200-6649, RATED FOR 150 LBS/HR, DRIVEN BY 1/2 HP, 1700 RPM, 230/460 VOLT MOTOR THRU GEAR REDUCER, 62 OUTPUT RPM. (LESS BELTING). LIKE NEW CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[EXTRUDER, 10" X 6', EXTRU-TECH, 100 HP, MDL E925PDU,]]> http://www.machineryandequipment.com/extruder-10-x-6-extru-tech-100-hp-mdl-e925pdu.html EXTRUDER, PELLETIZER, EXTRU-TECH, MODEL# E925PDU, SINGLE BARREL, MEASURES 10" DIAMETER X 6' LONG, JACKETED BARREL, TAPERED SCREW, DRIVEN BY 100 HP, 1780 RPM, 230/460 VOLT, 36/60HZ MOTOR THRU GEARBOX WITH 15.64: RATIO, RESULTING IN 114 OUTPUT RPM. CAPACITY RANGE IS 7,700 – 24,000 LBS/HR. SLIGHTLY USED AND IN EXCELLENT CONDITION. INCLUDES MISC DIES.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[EXTRUDER, 6" X 42", INSTA-PRO, 125 HP, MDL 2500, UNUSED (6)]]> http://www.machineryandequipment.com/extruder-6-x-42-insta-pro-125-hp-mdl-2500-unused-6.html (6) EXTRUDER, INSTA-PRO, MODEL# 2500, SINGLE BARREL, MEASURES 6" DIAMETER X 42" LONG, JACKETED BARREL, WITH TEMPERATURE PROBE PORTS, DRIVEN BY 125 HP, 1780 RPM, 230/460 VOLT, 3/60HZ MOTOR. COMPLETE WITH SIDE MOUNTED FEEDER, INCLUDING 8" X 12" X 11" DEEP HOPPER, INTERNAL DELUMPING PADDLE ARMS, LEADING TO 5" DIA. X 32" LONG FEED AUGER, DRIVEN BY SEW EURODRIVE 5 HP, 1680 RPM, 230/460 VOLT, 3/60HZ MOTOR. RATED CAPACITY 2,200 – 2,600 LBS/HR. SERIAL#’S 459 – 464. UNUSED AND IN LIKE NEW CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[EXPELLER, INSTA-PRO, 60 HP, 12" X 5' BARREL, MDL 5005, (2)_]]> http://www.machineryandequipment.com/expeller-insta-pro-60-hp-12-x-5-barrel-mdl-5005-2.html (2) UNUSED EXPELLER PRESS, OIL PRESS, INSTA-PRO, MODEL# 5005, 12" DIAMETER X 5' LONG BARREL, DRIVEN BY BALDOR 60 HP, 230/460 VOLT, 1770 RPM, 3/60HZ MOTOR THRU SEW EURODRIVE, RESULTING IN 50 OUTPUT RPM. CARBON STEEL PRESSING SECTION, WITH 5” DIA. X 6’ LONG BOTTOM MOUNTED SCREW CONVEYOR & STAINLESS STEEL COVERS. COMPLETE WITH CONE SHAPED FEEDER WITH AUGER DISCHARGE, 24" DIA. X 24" DEEP HOPPER, 6" DIA. AUGER, DRIVEN BY 5 HP, 1600 RPM MOTOR THRU GEARBOX, 9.71:1 RATIO. RATED FOR 4,000 – 4,500 LBS/HR CAPACITY. UNUSED AND IN LIKE NEW CONDITION. SERIAL#’S 35 & 37.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[DRYER, FLUID BED, 4' X 25', S/ST, CARRIER, COMPLETE SYSTEM,]]> http://www.machineryandequipment.com/dryer-fluid-bed-4-x-25-s-st-carrier-complete-system.html CARRIER FLUID BED DRYING SYSTEM, 4' WIDE X 25-1/2' LONG, ALL STAINLESS STEEL CONSTRUCTION, APPROX. 1/16" PERFORATIONS ON BED, 2-ZONE, "FLUID-FLOW," MODEL# OAD-C-4860S, 1/4" STROKE, 526 RPM, DRIVEN BY 5 HP, 1170 RPM, 460 VOLT, 64 AMPS, 3/60HZ MOTOR. INCLUDES S/ST TOP COVER, WITH (2) 30" DIA. OPENINGS LEADING THROUGH DUCTING TO CYCLONES, (2) NYB BLOWERS [(1) 30HP & (1) 40 HP] WITH AIR FILTERS. ALSO COMPLETE WITH 50 HP EXHAUST FAN. NEW IN 2007. EXCELLENT CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 25 CF, 304 S/ST, 10 HP, NEW, HD,]]> http://www.machineryandequipment.com/mixer-ribbon-25-cf-304-s-st-10-hp-new-hd-4.html NEW RIBBON MIXER, 25 CU.FT. WORKING CAPACITY, HEAVY DUTY MODEL, POLISHED 304 STAINLESS STEEL CONTACTS, TROUGH MEASURES 58" L X 29" W X 32" D, WITH MIRROR INTERIOR FINISH, 1/10" SHELL THICKNESS. HINGED COVER WITH BACKREST, SAFETY GRATES. 3" SOLID S/ST SHAFT, 2" WIDE X 2/5" THICK OUTER RIBBON, 2" WIDE x 2/5" THICK INNER RIBBON, 42 RPM RIBBON SPEED. MIXER IS DRIVEN BY 10 HP, GEARHEAD WASHDOWN MOTOR THRU ROLLERCHAIN. MIXER HAS A 6" CENTER BOTTOM DISCHARGE, KNIFE STYLE PNEUMATIC SLIDE GATE, 29-1/4" DISCHARGE HEIGHT. STAINLESS STEEL FRAME & LEGS. See video of mixer at http://www.youtube.com/watch?v=ui-d_LoBpjg
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[HEATER, BURNER, 90K BTU, NAT GAS, CONNERTON, MDL CSP-18-3]]> http://www.machineryandequipment.com/heater-burner-90k-btu-nat-gas-connerton-mdl-csp-18-3.html CONNERTON HEATER, BURNER MODEL CSP-18-3, S/N 1067. UNIT IS 45,000 BTU INNER BURNER AND 45,000 BTU OUTER BURNER, NATURAL GAS FIRED WITH 4" GAS PRESSURE. UNIT IS SELF STANDING HEATER, BURNER SET UP TO ACCOMMODATE APPROX. 18" DIA TANKS. WITH CARBON STEEL FRAME. UNIT IS LIKE A COMMERCIAL GRADE SINGLE BURNER STOVE.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[CENTRIFUGE, DECANTER, PIERALISI, MDL FP600/M, S/ST, 20 HP]]> http://www.machineryandequipment.com/centrifuge-decanter-pieralisi-mdl-fp600-m-s-st-20-hp-3.html DECANTER CENTRIFUGE, MANUFACTURED BY PIERALISI, MDL FP 600/M, STAINLESS STEEL CONTACTS, DRIVEN BY 20 HP V-BELT MAIN DRIVE, GEAR BOX WITH CYCLO GEAR ARRANGEMENT, THE BOWL IS RATED FOR 4,100 RPM'S, 1.4 KG./DM.3, AND MEASURES 353 MM IN DIAMETER. IT IS UNITIZED, NEW IN 2000, IS OPERATIONAL AND IN GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[SCREEN, ROTEX, 60" X 120", S/ST, SINGLE DECK, 3 HP, (5)]]> http://www.machineryandequipment.com/screen-rotex-60-x-120-s-st-single-deck-3-hp-5.html (5) ROTEX SCREEN, 60" X 120" SCREENING SURFACE, MODEL# 81A AL/SS, 50 SQ. FT. SURFACE AREA, 270 UPPER WEIGHT, 128 LOWER WEIGHT, 3" DIAMETER @ 227 RPM SCREEN MOTION, STAINLESS STEEL SCREEN, INCLUDES BALL CLEANING DECK, DRIVEN BY 3 HP MOTOR. VERY GOOD CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[DICER, URSCHEL, MDL G, S/ST, 3 HP,]]> http://www.machineryandequipment.com/dicer-urschel-mdl-g-s-st-3-hp.html DICER, MANUFACTURED BY URSCHEL, MODEL G, DICER, BRONZE CASE AND BRONZE IMPELLER, DRIVEN BY 3 HP, 460V, 1740 RPM MOTOR. PREVIOUSLY USED IN FRUIT DICING OPERATION. INCLUDES FEED CHUTE, DISCHARGE CHUTE, CONTROL BOX, ETC. 3/8" CIRCULAR KNIFE ASSEMBLY, 1/2" CROSSCUT ASSEMBLY.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MILL, IMPACT, VERTICAL SHAFT, 350 HP, TAS, (2),]]> http://www.machineryandequipment.com/mill-impact-vertical-shaft-350-hp-tas-2.html (2) VERTICAL SHAFT IMPACT MILL, THEORY APPLICATION SERVICE (TAS) MODEL 42B WITH 350 HP VERTICAL V-BELTED ELECTRIC MOTOR DRIVE. MILL HAS A 42" DIAMETER 5-STAGE ROTOR AND LAST USED TO MILL COAL TO 200 MESH FOR KILN FEED AT THE RATE OF 6 TPH IN A CEMENT PLANT. DRAWINGS AVAILABLE.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, PADDLE, 100 CF, C/ST, MARION, MDL HPC5478, 40 HP,]]> http://www.machineryandequipment.com/mixer-paddle-100-cf-c-st-marion-mdl-hpc5478-40-hp.html MARION PADDLE MIXER, 100 CU/FT WORKING CAP, MDL HPC-5478, 54"W x 8'L, CARBON STEEL CONSTRUCTION, INCLU (8) BOLTED PADDLES ALONG 5" DIA COMMON SHAFT, 4" DIA CENTER BOTTOM DISCHARGE. MIXER IS DRIVEN BY 40 HP, 230/460-V, 1780 RPM, 3/60 Hz EXP MOTOR, WITH TORQUE ARM REDUCER. COMPLETE WITH TWO PC HINGED TOP COVER W/PNEUMATIC CYLINDERS TO OPEN. MOUNTED ON LEGS, S/N 00065.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[TUNNEL, SHRINK, WELDOTRON, C/ST, MDL 712/A, CONVEYOR]]> http://www.machineryandequipment.com/tunnel-shrink-weldotron-c-st-mdl-712-a-conveyor.html WELDOTRON SHRINK TUNNEL. MODEL 712/A, COMPLETE WITH 15"W x 72" LONG CONVEYOR, 16" x 8"T x 46"L DOOR OPENING. UNIT HAS SINGLE PHASE, 220V DRIVE. CARBON STEEL UNIT. S/N PA65971.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[FILTER, ULTRA-FILTRATION, AUTO CLEAN, 3 HP]]> http://www.machineryandequipment.com/filter-ultra-filtration-auto-clean-3-hp.html ULTRA FILTRATION FILTER, AUTO CLEAN. UNIT HAS (3) PLASTIC TANKS MEASURING 9" DIA x 32" STRAIGHT SIDE. UNIT IS MODEL 0016 AC, S/N 050597 316949. UNIT OFFERED LESS PUMP.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[DETECTOR, METAL, GORING KERR, 10" x 5-1/2", CONVEYOR]]> http://www.machineryandequipment.com/detector-metal-goring-kerr-10-x-5-1-2-conveyor.html GORING KERR MODEL DSP-2 METAL DETECTOR WITH 10" WIDE x 5-1/2" TALL TUNNEL. UNIT HAS PLASTIC MESH BELT CONVEYOR MEASURING 8-1/2" WIDE x 80" LONG. HAS CONTROL PANEL, 1/2 HP 1725 RPM DRIVE.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[DRYER, TRIPLE PASS, 7' X 22', BLOWER, BURNER, CYCLONE,]]> http://www.machineryandequipment.com/dryer-triple-pass-7-x-22-blower-burner-cyclone.html (3) TRIPLE PASS DRYER, HEIL, 7' DIAMETER X 22' LONG, INCLUDES BLOWER, BURNER, CYCLONE, DRIVES, ETC. STILL INSTALLED & IN GOOD WORKING CONDITION WHEN TAKEN OUT OF SERVICE.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[BLOWER, 400 HP, TWIN CITY FAN, SIZE 660W, TYPE BCN-SW, V/S,]]> http://www.machineryandequipment.com/blower-400-hp-twin-city-fan-size-660w-type-bcn-sw-v-s.html BLOWER, 400 HP, MANUFACTURED BY TWIN CITY FAN & BLOWER, DRIVEN BY 400 HP, 460V, 1785 RPM, 3/60HZ MOTOR, MOUNTED ON BASE. TWIN CITY SIZE 660W, TYPE BCN-SW, CLASS L, ARR. 8. INCLUDES 25-1/2" DIA. FLANGED INLET & 32" X 12" FLANGED OUTLET. COMPLETE WITH TOSHIBA VARIABLE FREQUENCY DRIVE. UNUSED AND IN EXCELLENT CONDITION.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, RIBBON, 70 CF, STAINLESS LINED, 10 HP]]> http://www.machineryandequipment.com/mixer-ribbon-70-cf-stainless-lined-10-hp.html RIBBON MIXER, APPROXIMATELY 70 CU.FT. OR 2,000 LBS CAPACITY. STAINLESS LINED TROUGH AND COVERS, MILD STEEL DOUBLE RIBBON AGITATOR. TROUGH DIMENSIONS ARE 38" WIDE X 10' X 48" DEEP, 6" DIAMETER ROUND END BOTTOM DISCHARGE. 10 HP MOTOR THROUGH FALK SHAFT MOUNTED GEAR REDUCER. ON LEGS WITH HINGED COVERS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MIXER, PUG MILL, JEFFREY, TWIN SHAFT, 50 HP]]> http://www.machineryandequipment.com/mixer-pug-mill-jeffrey-twin-shaft-50-hp.html JEFFREY PUG MILL, TWIN SHAFT MIXER, TROUGH MEASURES 48" WIDE X 10' LONG X 39" DEEP. COMPLETE WITH (2) 24" DIAMETER PADDLE TYPE ARMS WITH REMOVABLE PADDLES. INTERNALS ARE ABRASION RESISTANT COATED. UNIT IS DRIVEN WITH A 50 HP, 1770 RPM, 230/460 VOLT MOTOR THRU HYDRAULIC DRIVE AND 4" WIDE GEARS ON EACH SHAFT. END BOTTOM DISCHARGE WITH SLIDE GATE, MOUNTED ON I-BEAM LEGS. UNIT HAS A DETACHABLE BOTTOM FOR MAINTENANCE AND HARD SURFACING. CONDITION VERY GOOD.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[CONVEYOR, BELT, 14" X 18']]> http://www.machineryandequipment.com/conveyor-belt-14-x-18.html BELT CONVEYOR, 14" WIDE X 18' LONG, INCLINED ON LEGS, 8' HIGH OVERALL DISCHARGE HEIGHT. DRIVE WITH 2 HP MOTOR ON LEGS.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[PRESS, BRIQUETTING, K-G, MODEL 75MS-20.5-4.7, 25 HP,]]> http://www.machineryandequipment.com/press-briquetting-k-g-model-75ms-20-5-4-7-25-hp.html PRESS BRIQUETTER , MODEL 75MS-20.5-4.7, COMPLETE WITH 25 HP, 220/440 VOLT, 1750 RPM DRIVE MOTOR WITH US VARI-DRIVE AND A 44.2:1 GEAR REDUCER. ROLLS ARE 3 POCKETS WIDE, EACH POCKET MEASURES 3/4" DIAMETER X 1-1/2" LONG. FEEDER IS A 5 HP, 220/440 VOLT THRU US VARI-DRIVE CONNECTED TO A PADDLE WHEEL ROTOR. HAND OPERATED HYDRAULIC PUMP FOR ROLL PRESSURE. ALL UNITIZED ON I-BEAM SKID. SN B258. LAST USED ON MINERALS POWDER COMPACTING.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000 <![CDATA[MILL, JARS, (9) 9.5" x 12", US STONEWARE, SZ1, 1.3G, PORC]]> http://www.machineryandequipment.com/mill-jars-9-9-5-x-12-us-stoneware-sz1-1-3g-porc.html US STONEWARE TYPE HIGH ALUMINA FORTIFIED PORCELAIN GRINDING JARS, SIZE 1 WITH 1.3 GALLON TOTAL CAPACITY. UNIT HAS POSITIVE LID LOCKING BAR AND HAND WHEEL FOR EASY USE. JARE MEASURES 6.5"ID x 7" INSIDE HEIGHT, 9.5" x 12" OVERALL DIMS WITH 8" DIA OPENING. VERY GOOD CONDITION, FOR USE WITH S734586 OR S734841.
$0.00
]]> Thu, 17 May 2012 05:37:53 +0000