<![CDATA[VIEW ALL INVENTORY]]>

<![CDATA[VIEW ALL INVENTORY]]> http://www.machineryandequipment.com/view-all-inventory-1 Thu, 09 Feb 2012 23:24:04 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[PRESS, BELT, PNEUMAPRESS, 1 DIA., TITANIUM, MODEL 8T-2 (2)]]> http://www.machineryandequipment.com/press-belt-pneumapress-1-dia-titanium-model-8t-2-2.html

(2) PNEUMAPRESS BELT FILTER PRESS, 1 METER DIAMETER PLATE, CONSISTS OF TITANIUM UPPER AND LOWER PLATE WHICH HYDRAULICALLY PRESSES ONTO A TRAVELING BELT. UPPER PLATE FORMS A CHAMBER WHERE SLURRY AND COMPRESSED AIR ARE INTRODUCED, LOWER PLATE COLLECTS LIQUIDS, THE BELT ACCUMULATES SOLIDS, SLURRY IS HIT WITH AIR TO REMOVE REMAINING LIQUIDS. ALSO INCLUDES DRIVE/WASH STATION WHERE "FILTER CAKE" IS WASHED BY SPRAY NOZZLES. CAPACITY IS 400 GAL/MIN EACH. NEW IN 1996. EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REFRIG, COOLING TOWER, 300 TON, MARLEY, S/ST, ]]> http://www.machineryandequipment.com/refrig-cooling-tower-300-ton-marley-s-st.html

MARLEY STAINLESS STEEL COOLING TOWER, NC SERIES, APPROX. 300 TON CAPACITY. UNIT IS 304 STAINLESS STEEL CONSTRUCTION, BOTTOM PAN, SIDES AND TOP ASSEMBLY. TOWER IS COMPL WITH 25 HP, 230/460V FAN DRIVE AND 6" DIA INLET TO TOWER. UNIT NEW 1998, EXCELLENT CONDITION, S/N's 13963-2-NC222-SM-98 & 139063-001-NC4222SM-98.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 1,350 GALLON, S/ST, WINE, 10' X 4.5' X 5', INSUL,]]> http://www.machineryandequipment.com/tank-1-350-gallon-s-st-wine-10-x-4-5-x-5-insul.html

TANK, 1,350 GALLON CAPACITY, STAINLESS STEEL CONTACTS, HORIZONTAL, MEASURES 10' LONG X 4-1/2' WIDE X 5' DEEP, TOP INCLUDES COVERS. MOUNTED ON (6) PIPE LEGS. INCLUDES 2" SIDE BOTTOM OUTLET WITH MANUAL VALVE. PREVIOUSLY USED AS WINE FERMENTER. OLDER VESSEL, BUT IN GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 1,000 GALLON, S/ST, WINE, 6' X 5', FT/SB,]]> http://www.machineryandequipment.com/tank-1-000-gallon-s-st-wine-6-x-5-ft-sb.html

TANK, 1,000 GALLON CAPACITY, STAINLESS STEEL CONSTRUCTION, MEASURES 6' DIAMETER X 5' STRAIGHT SIDE, SLOPED BOTTOM LEADING TO 2" SIDE BOTTOM OUTLET WITH VALVE. FLAT TOP WITH HINGED WOODEN COVER. TANK INCLUDE WOODEN STAND WITH STEPS TO ACCESS TANK. PREVIOUSLY USED AS WINE FERMENTER. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 5,700 GALLON, S/ST, JKT, WINE, 9' X 12', CT/SB]]> http://www.machineryandequipment.com/tank-5-700-gallon-s-st-jkt-wine-9-x-12-ct-sb.html

WINE FERMENTATION TANK, 5,711 GALLON CAPACITY, ALL 304 STAINLESS STEEL CONSTRUCTION, DIMPLE JACKETED IN TWO SECTIONS, MEASURES 9' DIAMETER X 12' HIGH, TRUNCATED CONE TOP, SLOPED BOTTOM, LEADING TO 2" SIDE BOTTOM OUTLET. INCLUDES 2" RACKING VALVE, SAMPLE PORT, ELEC. TEMP. SENSOR & 16" X 20" OVAL MANWAY WITH COVER. TOP HEAD INCLUDES 6" TOP HANDHOLE. MANUFACTURED BY SANTA ROSA STAINLESS. ONLY HELD PRODUCT 5 TIMES. EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 3,750 GALLON, S/ST, JKT, WINE, 7' X 12', CT/SB]]> http://www.machineryandequipment.com/tank-3-750-gallon-s-st-jkt-wine-7-x-12-ct-sb.html

WINE FERMENTATION TANK, 3,750 GALLON CAPACITY, ALL 304 STAINLESS STEEL CONSTRUCTION, DIMPLE JACKETED IN TWO SECTIONS, MEASURES 7'3" DIAMETER X 12' HIGH, CONE TOP, SLOPED BOTTOM, LEADING TO 2" SIDE BOTTOM OUTLET. INCLUDES 2" RACKING VALVE, SAMPLE PORT, ELEC. TEMP. SENSOR, 18" BOTTOM MANWAY WITH COVER & 16" X 20" OVAL MANWAY WITH COVER. TOP HEAD INCLUDES 2" CENTER TOP OPENING & 6" TOP HANDHOLE. MANUFACTURED BY SANTA ROSA STAINLESS. SERIAL# 1054. ONLY HELD PRODUCT 10 TIMES. EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 3,000 GALLON, 304L S/ST, AGIT, 25 PSI, DT/CB, (2)]]> http://www.machineryandequipment.com/tank-3-000-gallon-304l-s-st-agit-25-psi-dt-cb-2.html

(2) TANK, 3,000 GALLON CAPACITY, 304L STAINLESS STEEL CONSTRUCTION, MEASURES APPROX. 8' DIAMETER X 8' STRAIGHT SIDE, DISHED TOP & BOTTOM. RATED FOR 25 PSI/FV @ 100 DEG. F/-320 DEG. F. INCLUDES TOP MOUNTED CHEMINEER AGITATOR, WITH MOTOR THRU GEAR BOX, DRIVING STAINLESS STEEL SHAFT AND BLADES. BOTTOM HEAD INCLUDES 1-1/2" DIAMETER CENTER BOTTOM OUTLET. MANUFACTURED BY OHI COMPANY (STOCKTON, CA), MODEL# VESSEL V1, SERIAL# 23-440-26923-10. SHELL & HEAD THICKNESS - .375" THICK. NEW IN 2008 AND IN VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, RIBBON, 300 CU/FT, S/ST, DOUBLE, 50 HP]]> http://www.machineryandequipment.com/mixer-ribbon-300-cu-ft-s-st-double-50-hp.html

RIBBON MIXER, 300 CU/FT WORKING CAPACITY, DOUBLE RIBBON MIXER. UNIT IS STAINLESS STEEL CONSTRUCTION, 12'L x 5'W x 64" DEEP MIXING CHAMBER. OUTER RIBBON MEASURES 3" x 3/8" THICK, INNER IS 3-1/2" x 1/2" THICK, HAS 8" DIA CENTER BOTTOM DISCHARGE. UNIT HAS 50HP, 1775 RPM, 460V MOTOR WITH RATIO OF 25:6, MOUNTED ON I-BEAM LEGS W/11" x 18" PADS, RIBBON IS BOLT ON STYLE TO 2 STUB SHAFTS. NO NAMEPLATE DATA AVAILABLE. MIXER IS IN EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[PUMP, MOYNO, 10 HP, 4", C/ST, PROGRESSIVE CAVITY,]]> http://www.machineryandequipment.com/pump-moyno-10-hp-4-c-st-progressive-cavity-c737613.html

MOYNO PUMP, PROGRESSIVE CAVITY, 4" DIAMETER X 48" LONG, CARBON STEEL, MODEL# 4E008G1-CSB3-AAA, SERIAL# AS7269400-1 CF. DRIVEN BY 10 HP, 1740 RPM, 230/460V, 3/60HZ MOTOR, FAIR CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BLOWER, TUTHILL, VACUUM, PNEUMAX II]]> http://www.machineryandequipment.com/blower-tuthill-vacuum-pneumax-ii.html

TUTHILL BLOWER, ROTARY LOBE TYPE, MODEL# 4002-2222-M0008, SERIAL# 133681, DRIVEN BY 15 HP, 230/460 VOLT MOTOR THRU V-BELT. COMPLETE WITH ENCLOSURE. VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REACTOR, 3,000 GALLON, 316 S/ST, BLAW KNOX, AGIT, COILS,]]> http://www.machineryandequipment.com/reactor-3-000-gallon-316-s-st-blaw-knox-agit-coils.html

REACTOR, 3,000 GALLON, BLAW-KNOX, 316 STAINLESS STEEL, 8'DIA X 10' STRAIGHT SIDE, HAS TURBINE TYPE AGITATOR WITH MECHANICAL SEALS (40 HP MOTOR AND REDUCER ARE NO LONGER AVAILABLE). JACKET RATED FOR 35 PSI, BODY RATED FOR 150 PSI, 4" CENTER BOTTOM DISCHARGE, 6' LEGS, TOP FITTINGS INCLUDE (2) 4" FLANGES, 18" DIA. MANWAY, (2) 6" DIA. SITE GLASS OPENINGS, FITTED WITH 85 PSI STAINLESS STEEL HEATING COILS, PLATE COOLING COILS, GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[CRUSHER, JAW, 5" X 7", SAVONA GLADIATOR, 5 HP, MDL SVG5X7]]> http://www.machineryandequipment.com/crusher-jaw-5-x-7-savona-gladiator-5-hp-mdl-svg5x7.html

JAW CRUSHER, 5" X 7", MANUFACTURED BY SAVONA GLADIATOR, MODEL# SVG5X7 105, JAWS MEASURE 7" WIDE X 11" LONG, INCLUDES FEED HOPPER WITH 8-1/2" X 9-1/2" FEED. JAWS DRIVEN BY 5 HP, 230 VOLT, 1740 RPM, 1-PH, 60HZ MOTOR THRU V-BELT DRIVE. MOUNTED ON STAND, VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BOILER, FINN-AQUA, PURE STEAM GENERATOR, 80 HP, 2730#/HR]]> http://www.machineryandequipment.com/boiler-finn-aqua-pure-steam-generator-80-hp-2730-hr.html

FINN-AQUA PURE STEAM GENERATOR MODEL 1500-S1, RATED FOR 1240 KG/HR PURE STEAM @ 116 PSI. UNIT FEATURES ALL 316L STAINLESS STEEL CONTACT PARTS, CLEAN STEAM GENERATOR, DESIGNED TO CONVERT 350 GPM INTO 2730#/HR STEAM UTILIZING 3258#/HR OF PLANT STEAM. UNIT NEW 1993, LAST USED IN STERILE SVC IN PROD OF WATER FOR INJECTABLES (WFI), S/N 37889. INCL GRUNDFLO FEED PUMP WITH ELECTRICALS SET FOR 460V AND 120V FOR CONTROLS. EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[EVAPORATOR, FINN-AQUA, 125#/HR, STILL F/WFI, MDL FA-500-SA]]> http://www.machineryandequipment.com/evaporator-finn-aqua-125-hr-still-f-wfi-mdl-fa-500-sa.html

FINN-AQUA MULTIPLE EFFECT WATER STILL FOR WFI. UNIT RATED AT 500 LTR/HR OF PURE DISTILLATE WATER. TYPE FA-500-SA. UNIT MFG NEW 1992, COMPLETE ALL 316 STAINLESS STEEL CONTACT PARTS, FEED PUMP AND CONTROLS. ELECTRICAL REQUIREMENT IS 460V FOR SYSTEM, 120V FOR CONTROLS. SYSTEM IS IN EXCELLENT CONDITION, LAST PROCESSING IN PHARMACEUTICAL FACILITY.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BLOWER, 7.5 HP, ROOTS, SIZE 36URAI, ROTARY LOBE TYPE,]]> http://www.machineryandequipment.com/blower-7-5-hp-roots-size-36urai-rotary-lobe-type.html

ROOTS BLOWER, ROTARY LOBE TYPE, AMERICAN COMPRESSOR, SIZE 36URAI, DRIVEN BY 7-1/2 HP, 230/460V, 1740 RPM, 3/60HZ MOTOR THRU V-BELT. MOUNTED ON FRAME WITH BOTTOM MOUNTED SILENCER. SERIAL# 0807971476. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[SILO, 250 CF, C/ST, 6' X 8', CONE BOTTOM, EPOXY COATED,]]> http://www.machineryandequipment.com/silo-250-cf-c-st-6-x-8-cone-bottom-epoxy-coated.html

SILO, APPROX. 250 CU. FT. CAPACITY, MEASURES 6' DIAMETER X 8' STRAIGHT SIDE, DEEP CONE BOTTOM, 6" FLANGED CENTER BOTTOM OUTLET. MOUNTED ON LEGS. CARBON STEEL CONSTRUCTION WITH EPOXY COATING INTERNALLY. TOP HEAD INCLUDES 14", 20" & 30" DIA. OPENINGS. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[SILO, 250 CF, C/ST, 6' X 8', CONE BOTTOM, VIB. BIN BOTTOM,]]> http://www.machineryandequipment.com/silo-250-cf-c-st-6-x-8-cone-bottom-vib-bin-bottom.html

SILO, APPROX. 250 CU. FT. CAPACITY, MEASURES 6' DIAMETER X 8' STRIAGHT SIDE, DEEP CONE BOTTOM, VIBRATORY BIN BOTTOM, 7-1/2" FLANGED CENTER BOTTOM OUTLET. MOUNTED ON LEGS. CARBON STEEL CONSTRUCTION WITH EPOXY COATING INTERNALLY. TOP HEAD INCLUDES 11-1/2" DIA. OPENING & 29" X 29" OPENING. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, INLINE, HIGH SHEAR, IKA WORKS, S/ST, 50 HP,]]> http://www.machineryandequipment.com/mixer-inline-high-shear-ika-works-s-st-50-hp.html

HIGH SHEAR MIXER, INLINE, DISPAX REACTOR, MANUFACTURED BY IKA WORKS, TYPE DR3-13/CIP, MODEL# X-107, STAINLESS STEEL CONTACTS, 3" DIA. IN/OUT, DRIVEN BY 50 HP, 3555 RPM, 460V, 3/60HZ MOTOR. UNITIZED ON COMMON S/ST BASE. SERIAL# 0953. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[PUMP, MOYNO, 10 HP, 4", C/ST, PROGRESSIVE CAVITY,]]> http://www.machineryandequipment.com/pump-moyno-10-hp-4-c-st-progressive-cavity.html

MOYNO PUMP, PROGRESSIVE CAVITY, 4" DIAMETER X 48" LONG, CARBON STEEL, MODEL# 4E008G1-CSB3-AAA, SERIAL# AS7269400-2 CF. DRIVEN BY 10 HP, 1740 RPM, 230/460V, 3/60HZ MOTOR, SEW EURODRIVE, 406 OUTPUT RPM. FAIR CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, STATIC, 2" X 36", PLASTIC, KOFLO, VERTICAL, (17)]]> http://www.machineryandequipment.com/mixer-static-2-x-36-plastic-koflo-vertical-17.html

(17) STATIC MIXER, MANUFACTURED BY KOFLO, EACH MEASURES 2" DIAMETER X 36" HIGH, PLASTIC CONSTRUCTION. EACH TUBE IS MOUNTED VERTICALLY ON COMMON FRAME.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 6,000 GALLON, 304L S/ST, 11' X 9', FB/CT, (4)]]> http://www.machineryandequipment.com/tank-6-000-gallon-304l-s-st-11-x-9-fb-ct-4.html

(4) TANK, 6,000 GALLON CAPACITY, ALL 304L STAINLESS STEEL CONSTRUCTION, MEASURES 11' DIAMETER X 9' STRAIGHT SIDE, CONE TOP WITH FLAT BOTTOM. TOP HEAD INCLUDES 24" DIAMETER TOP MANWAY WITH COVER AND 2" - 4" OTHER TOP OPENINGS. INCLUDES (2) SIDE BOTTOM OUTLETS. PREVIOUSLY STORING SILICONE OIL. PAD MOUNTED. NEW IN 2008 AND IN EXCELLENT CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BLOWER, 5 HP, ROOTS, SIZE 36URAI, ROTARY LOBE TYPE,]]> http://www.machineryandequipment.com/blower-5-hp-roots-size-36urai-rotary-lobe-type.html

ROOTS BLOWER, ROTARY LOBE TYPE, AMERICAN COMPRESSOR, SIZE 36URAI, DRIVEN BY APPROX. 5 HP MOTOR THRU V-BELT. MOUNTED ON FRAME WITH BOTTOM MOUNTED SILENCER. SERIAL# 0712960480. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BLOWER, 50, HP, ROOTS, SIZE 718U-RAI, ROTARY LOBE TYPE,]]> http://www.machineryandequipment.com/blower-50-hp-roots-size-718u-rai-rotary-lobe-type-1.html

ROOTS BLOWER, ROTARY LOBE TYPE, AMERICAN COMPRESSOR, SIZE 718-U-RAI, DRIVEN BY 50 HP, 230/460 VOLT, 1765 RPM, 3/60HZ MOTOR THRU V-BELT. MOUNTED ON FRAME WITH BOTTOM MOUNTED SILENCER. SERIAL# 0611939850. VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[FEEDER, SCREW, 3/4" X 12", S/ST, K-TRON, DUAL SCREW,]]> http://www.machineryandequipment.com/feeder-screw-3-4-x-12-s-st-k-tron-dual-screw-1.html

SCREW FEEDER, MANUFACTURED BY K-TRON, STAINLESS STEEL CONSTRUCTION, K-2 MODULAR, K-TRON SODER, MODEL# K2MLT20. SCREWS MEASURE 3/4" DIAMETER X 12" LONG, OVERLAPPING SPIRALS ON SCREW. FEED HOPPER MEASURES 10" DIAMETER X 12" DEEP, INCLUDES INTERNAL AGITATOR. UNIT IS RATED FOR 45 KG SCALE RANGE, 17 KG NET WEIGHT, 28 KG TARE WEIGHT. SCREWS DRIVEN BY .45 KW, 100 VOLT MOTOR. PROJECT NUMBER S17124, PO NUMBER DV0509-003. COMPLETE WITH SMART CONTROL MODULE BOX. MANUFACTURED IN 2000. INCOMPLETE.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, INLINE, HIGH SHEAR, IKA WORKS, S/ST, 150 HP,]]> http://www.machineryandequipment.com/mixer-inline-high-shear-ika-works-s-st-150-hp.html

HIGH SHEAR MIXER, INLINE, MANUFACTURED BY IKA WORKS, 2000 SERIES, TYPE DR2000/40, STAINLESS STEEL CONTACTS, 12" DIA. MILLING CHAMBER, 6" DIA. INLET, 4" DIA. OUTLET, MODEL# P012237, DRIVEN BY 150 HP, 1785 RPM, 460V, 3/60HZ MOTOR. COMPLETE WITH FLOWSERVE SEAL RESERVOIR, RATED FOR 960 PSI @ 100 DEG. F. UNITIZED ON COMMON S/ST BASE. UNUSED AND IN LIKE NEW CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 325 GALLON, S/ST, AGIT, 48" X 40", OT/CB,]]> http://www.machineryandequipment.com/tank-325-gallon-s-st-agit-48-x-40-ot-cb.html

TANK, APPROX. 325 GALLON, MEASURES 48" DIAMTER X 40" STRAIGHT SIDE, STAINLESS STEEL, PLUS SLIGHT CONE BOTTOM, FLAT TOP WITH HINGED COVER. INCLUDES AGITATOR, DRIVEN BY APPROX. 1 HP MOTOR THRU GEAR BOX, DRIVING 2" DIA. S/ST CENTER SHAFT, TURNING 3-BLADE AGITATION. MANUFACTURED BY RAYNERI EURO MACHINES (FRANCE). GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[DRYER, SPRAY, 48", S/ST, APV, ELECTRIC, MODEL LAB S1,]]> http://www.machineryandequipment.com/dryer-spray-48-s-st-apv-electric-model-lab-s1.html

SPRAY DRYER, 48" DIAMETER X 30" STRAIGHT SIDE WITH 60 DEG. CONE BOTTOM, STAINLESS STEEL CONSTRUCTION, ELECTRICALLY HEATED, MANUFACTURED BY APV ANHYDRO, MODEL# LAB S1, SERIAL# 031013, NEW IN 1995. INCLUDES CONTROLS FOR ATOMIZER.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[DRYER, SPRAY, 40", S/ST. ANHYDRO, TYPE PSD52, SYSTEM]]> http://www.machineryandequipment.com/dryer-spray-40-s-st-anhydro-type-psd52-system.html

SPRAY DRYING SYSTEM, 40" DIAMETER X 48" STRAIGHT SIDE, WITH DEEP CONE BOTTOM, ELECTRICALLY HEATED, MANUFACTURED BY ANHYDRO, TYPE PSD 52, ID# 42040, PROJECT# USA 2498, NEW IN 2006, 1-1/2 CENTER BTM OUTLET, INCLUDES DIGITAL CONTROL BOX, ACCESS DOOR & TOP MOUNTED BLOWER. SYSTEM INCLUDES DUST COLLECTOR, MEASURING 36" X 56" X 12' OVERALL HEIGHT. STILL INSTALLED. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, DISPERSION, 25 HP, S/ST, AIR/HYDRAULIC LIFT]]> http://www.machineryandequipment.com/mixer-dispersion-25-hp-s-st-air-hydraulic-lift.html

DISPERSION MIXER, COWLES DISSOLVER, STAINLESS STEEL CONTACTS, DISPERSION BLADE DRIVEN BY 25 HP, 220/440V, 1800 RPM, 3/60HZ MOTOR. AGITATOR INCLUDES 2" DIA. SHAFT, APPROX. 12" DIA, DISPERSION BLADE, AIR/HYDRAULIC LIFT MECHANISM. COMPLETE WITH 300 GALLON S/ST TANK, MEASURING 40" DIA. X 48" DEEP STRAIGHT SIDE, SLIGHT CONE BOTTOM, LEADING TO 2" CENTER BOTTOM OUTLET. INCLUDES WILDEN PLASTIC DIAPHRAGM PUMP, 2" IN/OUT.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[PRESS, BRIQUETTING, BEPEX, MDL 60/84-MS-20.5X9, 30 HP]]> http://www.machineryandequipment.com/press-briquetting-bepex-mdl-60-84-ms-20-5x9-30-hp.html

BRIQUETTER, BEPEX MODEL NUMBER 60/84-MS-20.5 X 9, ALL STAINLESS STEEL CONTACT PARTS, ROLL DIMENSIONS 20.5" DIAMETER X 9" FACE, 30 HP MOTOR WITH ROLL SPEED OF 26 RPM, DOWN SCREW FEEDER WITH 10 HP MOTOR AND VARIABLE FROM 20 RPM TO 108 RPM. ROLL POCKETS ARE BABY ALMOND, .54 WIDE X .82 LONG X .35 HIGH. DESIGNED FOR AMMONIUM SALT AT 3 TONS PER HOUR, THEN CONVERTED TO 84 TON FORCE. CONDITION EXCELLENT.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[EXTRUDER, 24", JC STEELE, C/ST, 100 HP, MIXING SECTION,]]> http://www.machineryandequipment.com/extruder-24-jc-steele-c-st-100-hp-mixing-section.html

EXTRUDER SYSTEM, JC STEELE #30, CARBON STEEL CONSTRUCTION. SYSTEM INCLUDES MIXING SECTION, MEASURING 24” WIDE X 96” LONG X 24” DEEP, WITH 6” DIA. CENTER SHAFT, APPROX. (30) 8” X 6” X 2” THICK PADDLES ON COMMON SHAFT; FEEDS INTO 24” DIA. X 5’ LONG EXTRUSION SECTION, THROUGH 1” DIAMETER PERFORATIONS. DRIVEN BY APPROX. 100 HP MOTOR THRU DOUBLE V-BELT GEAR REDUCTION. INCLUDES 36” X 48” C/ST TANK WITH SIHI LIQUID RING VACUUM PUMP, DRIVEN BY 10 HP, 230/460V, 3/60HZ MOTOR. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MILL, TURBULIZER, S/ST, BEPEX, MDL TS30, 75 HP,]]> http://www.machineryandequipment.com/mill-turbulizer-s-st-bepex-mdl-ts30-75-hp.html

TURBULIZER, BEPEX, MODEL TS30, CHAMBER MEASURES 30" DIA. X 60" LONG, STAINLESS STEEL CONSTRUCTION, SERIAL# IS-L2001547. DRIVEN BY 75 HP, 1175 RPM, 230/460V, 3/60HZ XP MOTOR THRU V-BELT DRIVE.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MILL, HAMMER, 30" X 16", PRATER, 20 HP, STYLE CC,]]> http://www.machineryandequipment.com/mill-hammer-30-x-16-prater-20-hp-style-cc.html

HAMMER MILL, PRATER MILL, 20" DIAMETER X 16" FACE GRINDING CHAMBER, STYLE CC, CARBON STEEL CONSTRUCTION, INCLUDES SWINGING HAMMERS, DISCHARGING THRU SCREEN. HAMMERS DRIVEN BY 20 HP, 1750 RPM, 208-220/440V, 3/60HZ MOTOR THRU V-BELT DRIVE.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, PADDLE, 10 CF, S/ST, 2 HP, JKT,]]> http://www.machineryandequipment.com/mixer-paddle-10-cf-s-st-2-hp-jkt.html

PADDLE MIXER, APPROX. 10 CU. FT., CHAMBER MEASURES 38" LONG X 20" WIDE X 24" DEEP, STAINLESS STEEL CONTACTS, 4" END BOTTOM DISCHARGE, INCLUDES 29" LONG JACKET SECTION, EXTENDING 8" UP EACH SIDE. PADDLE DRIVEN BY 2 HP, 208-220/440V, 1750 RPM, 3/60HZ MOTOR THRU GEAR BOX. INCLUDES START/STOP CONTROL BOX.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MILL, JET, 16", S/ST, SYSTEM, WITH FEEDER, DUST COLLECTOR]]> http://www.machineryandequipment.com/mill-jet-16-s-st-system-with-feeder-dust-collector.html

JET MILL SYSTEM, STAINLESS STEEL CONSTRUCTION, 12" DIA. JET MILL, 2-1/2" IN/OUT. INCLUDES SCHENK ACCU-RATE SCREW FEEDER, MEASURING 1-1/2" DIA. X 20" LONG FEED, MEGATRON FEEDER, SERIAL NUMBER 70889-01A-VFD. COMPLETE WITH DONALDSON/TORIT S/ST BAGHOUSE, MEASURES 24" DIA. X 30" STRAIGHT SIDE WITH DEEP CONE BOTTOM, LEADING TO 5" CENTER BOTTOM OUTLET WITH MANUAL BUTTERFLY VALVE, ACCESS DOOR. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[SCREEN, SWECO, 30", S/ST, TRIPLE, 1/2 HP, DEWCO SEPARATORS,]]> http://www.machineryandequipment.com/screen-sweco-30-s-st-triple-1-2-hp-dewco-separators.html

SCREEN, 30" DIAMETER, SWECO-TYPE, MANUFACTURED BY DEWCO SEPARATORS, DRIVEN BY 1/2 HP, 230/460 VOLT, 1200 RPM, TRIPLE DECK, INCLUDES DUST COVER. MOUNTED ON FRAME WITH CASTERS.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[SEPARATOR, HYDROCYCLONE, KREBS, 6", MDL 06B-12-52587]]> http://www.machineryandequipment.com/separator-hydrocyclone-krebs-6-mdl-06b-12-52587.html

KREBS HYDROCYCLONE, MODEL# 06B-12-S2187, CARBON STEEL CONSTRUCTION, 2-1/2 DIAMETER IN, 4" DIAMETER OUT, SERIAL# 075143U. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[PUMP, CENTRIF., 125 HP, C/ST, GOULDS, MDL 3196]]> http://www.machineryandequipment.com/pump-centrif-125-hp-c-st-goulds-mdl-3196.html

GOULDS PUMP, MODEL NUMBER 3196, SIZE 6X8-13, SERIAL NUMBER 296B6L4-2, 1800 RPM, CARBON STEEL CONSTRUCTION. DRIVEN BY 125 HP, 460 VOLT, 1785 RPM, 3/60HZ MOTOR.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[FEEDER, SCREW, 2" X 24", S/ST, VIBRA SCREW,]]> http://www.machineryandequipment.com/feeder-screw-2-x-24-s-st-vibra-screw.html

SCREW FEEDER, VIBRA SCREW FEEDER, 2" DIAMETER X 24" LONG, STAINLESS STEEL CONTACTS, 12" LONG MIXING SECTION, COMPLETE WITH DRIVE, SERIAL NUMBER 200812.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[DUST COLLECTOR, BIN VENT, 160 SF, C/ST, (16) CAGES,]]> http://www.machineryandequipment.com/dust-collector-bin-vent-160-sf-c-st-16-cages.html

DUST COLLECTOR, BIN VENT, APPROX. 160 SF SURFACE AREA, HOUSING MEASURES 30" X 30" X 9' TALL, ACCOMMODATES (16) 5" DIA. X 8' LONG BAGS IN 4X4 PATTERN. INCLUDES CAGES & TOP MOUNTED BLOWER. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[BLOWER, 50, HP, ROOTS, SIZE 718U-RAI, ROTARY LOBE TYPE,]]> http://www.machineryandequipment.com/blower-50-hp-roots-size-718u-rai-rotary-lobe-type.html

ROOTS BLOWER, ROTARY LOBE TYPE, AMERICAN COMPRESSOR, SIZE 718U-RAI, DRIVEN BY 50 HP, 230/460 VOLT, 1765 RPM, 3/60HZ MOTOR THRU V-BELT. MOUNTED ON FRAME WITH BOTTOM MOUNTED SILENCER. SERIAL# 0605927410. VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[MIXER, AGITATOR, 7-1/2 HP, S/ST, LOTUS, 3" X 10', (6),]]> http://www.machineryandequipment.com/mixer-agitator-7-1-2-hp-s-st-lotus-3-x-10-6.html

(6) AGITATOR, DRIVEN BY 7-1/2 HP, 1750 RPM MOTOR THRU GEARBOX, 33 OUTPUT RPM, MODEL# CFL3-U-5.5/28II, MOTOR MODEL# Y132S-4. INCLUDES 3" DIA. S/ST SHAFT X 120" LONG, DRIVING (3) 36" LONG BLADES. GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[DRYER, SPRAY, 8', S/ST, COMPLETE SYSTEM, SPRAY NOZZLE,]]> http://www.machineryandequipment.com/dryer-spray-8-s-st-complete-system-spray-nozzle.html

SPRAY DRYING SYSTEM, 8' DIAMETER X 10' STRAIGHT SIDE, PLUS DEEP CONE BOTTOM, SPRAY NOZZLE TYPE APPLICATION, GAS-FIRED, MAIN CHAMBER IS INSULATED, INCLUDES ACCESS DOOR & 8" DIA. CENTER BTM OUTLET WITH ROTARY AIR LOCK VALVE, MFG. BY CAROLINA CONVEYING SYSTEMS, DRIVEN BY 1/2 HP MOTOR. SYSTEM INCLUDES DUST COLLECTOR, BAGHOUSE, MEASURES 68" X 68" X 96" HIGH, WITH WALK-IN-PLENUM, ACCESS DOOR AND (8) PULSE JET BLOW-BACK MECHANISMS. ALSO INCLUDES MAXON BURNER, NAT. GAS-FIRED, WITH SHUTOFF VALVE. COMPLETE WITH 24" DIA. X 60" HIGH S/ST CYCLONE, WITH 6" CENTER BTM OUTLET. COMPLETE SYSTEM. STILL INSTALLED AND IMMEDIATELY AVAILABLE FOR SHIPMENT.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REACTOR, 150 GAL, S/ST, VAC, JKT F/OIL, 2 HP, CE HOWARD]]> http://www.machineryandequipment.com/reactor-150-gal-s-st-vac-jkt-f-oil-2-hp-ce-howard.html

CE HOWARD JACKETED RESIN REACTOR, 150 GALLON, 31" x 42", TYPE 304 S/ST WITH DISHED BOTTOM AND REMOVABLE CLAMP-ON FLAT TOP. UNIT RATED FOR VAC INTERNAL AND MINIMAL INT PRESSURE. VESSEL IS AGITATED W/ 2 HP VARI DRIVE, 230/460V TOP ENTERING AGIT, 1-1/4" SHAFT W/3"x8" PROP BLADES. UNIT HAS MULTIPLE ZONE HOT OIL JACKET, NO PRESSURE RATING & INCL ASSRTD TOP INLETS, SITE GLASS & VAPOR OUTLET ON TOP HEAD, 2" BTM OUTLET FLANGE. MFG 1989, VERY GOOD CONDITION. LAST USED MFG SUPER-GLUE TYPE MTL, S/N B1716. STYLE 15862A.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REACTOR, 150 GALLON, S/ST, VAC, JKT F/OIL, 1.5 HP, ]]> http://www.machineryandequipment.com/reactor-150-gallon-s-st-vac-jkt-f-oil-1-5-hp.html

CE HOWARD JACKETED RESIN REACTOR, 150 GALLON, 32" x 42", TYPE 304 S/ST WITH DISHED BOTTOM AND REMOVABLE CLAMP-ON FLAT TOP. UNIT RATED FOR VAC INTERNAL AND MINIMAL INT PRESSURE. VESSEL IS AGITATED W/ 1.5 HP VARI DRIVE, 240V TOP ENTERING AGIT, 1-1/4" SHAFT W/3"x8" PROP BLADES. UNIT HAS MULTIPLE ZONE HOT OIL JACKET, NO PRESSURE RATING & INCL ASSRTD TOP INLETS, SITE GLASS & VAPOR OUTLET ON TOP HEAD, 1.5 BTM OUTLET FLANGE. MFG 1989, VERY GOOD CONDITION. LAST USED MFG SUPER-GLUE TYPE MATERIAL.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REACTOR, 250 GALLON, S/ST, VAC, JKT F/OIL, 3 HP, ]]> http://www.machineryandequipment.com/reactor-250-gallon-s-st-vac-jkt-f-oil-3-hp.html

CE HOWARD JACKETED RESIN REACTOR, 250 GALLON, 39" x 62", TYPE 304 S/ST WITH DISHED BOTTOM AND REMOVABLE CLAMP-ON FLAT TOP. UNIT RATED FOR VAC INTERNAL AND MINIMAL INT PRESSURE. VESSEL IS AGITATED WITH 3 HP VARI DRIVE, 230/460V TOP ENTERING AGIT, 2-1/2" SHAFT W/4"x12" PROP BLADES. UNIT HAS MULTIPLE ZONE HOT OIL JACKET, NO PRESSURE RATING & INCL ASSORTED TOP INLETS, SITE GLASS & VAPOR OUTLET ON TOP HEAD, 3" BOTTOM OUTLET FLANGE. MFG 1989, VERY GOOD CONDITION. LAST USED MFG SUPER-GLUE TYPE MATERIAL.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[REACTOR, 250 GALLON, S/ST, VAC, JKT F/OIL, 5 HP, ]]> http://www.machineryandequipment.com/reactor-250-gallon-s-st-vac-jkt-f-oil-5-hp.html

CE HOWARD JACKETED RESIN REACTOR, 250 GALLON, 39" x 60", TYPE 304 S/ST WITH DISHED BOTTOM AND REMOVABLE CLAMP-ON FLAT TOP. UNIT RATED FOR VAC INTERNAL AND MINIMAL INT PRESSURE. VESSEL IS AGITATED WITH 5 HP VARI DRIVE, 230/460V TOP ENTERING AGITATOR, 2-1/4" SHAFT W/4"x12" PROP BLADES. UNIT HAS MULTIPLE ZONE HOT OIL JACKET, NO PRESSURE RATING & INCL ASSORTED TOP INLETS, SITE GLASS & VAPOR OUTLET ON TOP HEAD, 3" BOTTOM OUTLET FLANGE. MFG 1989, VERY GOOD CONDITION. LAST USED MFG SUPER-GLUE TYPE MATERIAL, SERIAL NUMBER R1715, STYLE 158494.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[TANK, 300 GALLON, S/ST, 48" x 3', OT/FB, JKTD, 150 PSI]]> http://www.machineryandequipment.com/tank-300-gallon-s-st-48-x-3-ot-fb-jktd-150-psi.html

MUELLER 300 GALLON STAINLESS STEEL TANK. UNIT MEASURES 48" DIA x 3' STRAIGHT SIDE WITH OPEN TOP AND FLAT BOTTOM TO 2" SIDE BOTTOM DISCHARGE. VESSEL IS JACKETED FOR 150 PSI @ 400 DEG F, MFG 1975, S/N 134173-4, NATL BRD 3453. TANK IS MOUNTED ON CASTERS FOR PORTABLE SVC, JACKET HAS 1" INLET AND 1-1/2" OUTLET, VERY GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[OVEN, BLUE M, LAB, 20" x 15" x 15", 120VAC]]> http://www.machineryandequipment.com/oven-blue-m-lab-20-x-15-x-15-120vac.html

BLUE M MODEL OV-490A-2 LAB OVEN. UNIT HAS INSIDE DIMS OF 20"W x 15"L X 15" TALL AND OPERATES ON 120 VAC, RATED AT 1600 WATTS. CONDITION IS FAIR. 1/6 HP FAN DRIVE NEED REPLACEMENT.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000 <![CDATA[OVEN, BLUE M, 13" x 12" x 12", STABLE-THERM, MDL OV-472A-2]]> http://www.machineryandequipment.com/oven-blue-m-13-x-12-x-12-stable-therm-mdl-ov-472a-2.html

BLUE M MODEL OV-472A-2 STABLE THERM OVEN. UNIT HAS INSIDE DIMS OF 13"W x 12"L x 12"T. OVEN OPERATED ON 120 VAC WITH TEMP RANGE OF 38 TO 260 DEG CENTIGRADE OR 500 DEG F. UNIT IS IN GOOD CONDITION.

$0.00

]]> Thu, 09 Feb 2012 23:24:04 +0000