+1-415-467-3400

 

Our Recently Arrived Equipments

  1. Mixer, Ribbon, 17 CF, S/st, 9kw / 12 HP, Jiangyin

    Mixer, Ribbon, 17 CF, S/st, 9kw / 12 HP, Jiangyin

    Stock Number: S741060

    Jiangyin Hongda Powder Equipment stainless steel 17-cubic foot ribbon mixer. Unit is single ribbon with cover and run by 9kw / 12 hp motor. Unit is model CH-500 and was manufactured in November 2005.
    ...
  2. S741059_A

    Detector, Level, Filtec, Mdl FT-50, Can Level Inspector,

    Stock Number: S741059

    Filtec model number FT-50 full can level inspector, serial number 113148. Last used at beverage processing and packaging facility.
    ...
  3. S741058_A

    Tank, 17,000 Gallon, S/st, 12' X 22', Corn Syrup Tank, Wine

    Stock Number: S741058

    Stainless steel 17,000 gallon corn syrup tank, vertical orientation, insulated vessel. Measure 12' diameter X 22' straight side. Includes side bottom manway with cover....
  4. S741057_A

    Tank, 12,000 Gallon, S/st, 11' X 16', Cone Btm, Wine, (7)

    Stock Number: S741057

    (7) Stainless steel 12,000 gallon wine tank, vertical orientation, single wall. Measure 11' diameter X 16' straight side, with cone bottom and center bottom outlet. Vessels are mounted on stand with legs....
  5. S741054_A

    Mixer, Rotary, Batch, 15 CF, S/st, Munson, Mdl 700-TH-15,

    Stock Number: S741054

    Munson rotary batch mixer, model number 700-TH-15-SS, stainless steel construction. Rated for 15 cu. ft. batch volume, 29 cu. ft. total volume, Serial number 110175. Complete with drive rated for 230/460V, 3/60Hz....
  6. S741049_A

    Screen, Rotary, 60" X 6-1/2', S/st, Marel, Spray Nozzles,

    Stock Number: S741049

    Marel stainless steel rotary screen, dewatering screen, drum measures approximately 60" diameter X 6-1/2' long, includes internal spirals and slotted screen with 1cm spacing. Screen includes internal spray nozzles. Includes top access doors above screenin...
  7. S741048_A

    Mixer, Dispersion, Myers, 15 HP, S/st,

    Stock Number: S741048

    Myers dispersion mixer, 15 hp explosion proof motor, 220/440 volt, 1745 rpm, 3 phase. Unit is complete with floor pedestal mount with air over hydraulic lift, includes 1-5/8" diameter x 42" stainless steel shaft, 48" stroke and 13" dispersion blade, heavy...
  8. S741044_A

    Mixer, Conical, 6.5 CF, S/st, Paddle,

    Stock Number: S741044

    Stainless steel conical mixer, approximately 6.5 cubic foot capacity. Chamber measures 27" diameter X 16" straight side with a total length of 34". Unit includes internal paddle agitation mounted on common shaft. Unit has 12" inlet with door and 6" outlet...
  9. S741043_A

    Polisher, Capsule, 26" X 6", S/st,

    Stock Number: S741043

    Capsule polisher, all stainless steel contacts. Polishing chamber measures 26" long X 6" wide. Includes 8" X 9" feed hopper leading to 1-1/2" square inlet. Includes speed controller. Unit mounted on stainless steel base. Driven by 2/3 HP, 110V, 60Hz motor...
  10. S741042_A

    Screen, Vibratory, 17", Single, S/st, Sweco-Type,

    Stock Number: S741042

    Stainless steel vibratory screen, 17" diameter. Unit is a single-deck type with ball cleaning deck. Unit has 6" x 5" square discharge. Includes start/stop switch. Driven by approximately 2 HP motor. Very good condition.
    ...
  11. Mixer, Paddle, 6.5 CF, S/st, 5 HP,

    Mixer, Paddle, 6.5 CF, S/st, 5 HP,

    Stock Number: S741041

    Stainless steel tank-style paddle mixer, approximately 6.5 cubic foot capacity. Mixing chamber measures 27" diameter X 19" deep. Includes four (4) mixing arms mounted on common center shaft with scraper attachment on bottom of chamber. Each mixing arm mea...
  12. S741040_A

    Mixer, V-Type, 8 Qt, S/st, Lab,

    Stock Number: S741040

    Stainless steel lab size V-Type mixer, approximately 8 quart capacity. Each chamber measures 6" diameter X 8" long. Each chamber includes one 4" inlet with sanitary clamp fitting. Unit has 2-1/2" outlet. Includes start/stop switch. Unitized on stainless s...
  13. S741038 _A

    Tank, 3,750 Gallon, S/st, 96" x 120", DTFB, Kennedy

    Stock Number: S741038

    Kennedy 3,750 gallon stainless steel tank, measures 96" diameter x 120" straight side with dome top and flat bottom. Unit has (1) 6"; (1) 3" and (3) 2" npt top inlets, 24" diameter top manway (less door), 24" side bottom manway with door, center bottom di...
  14. S741037 (1)

    Tank, 2,750 Gallon, S/st, 96" x 88", DTDB, GH Hicks, Jkt

    Stock Number: S741037

    GH Hicks 2,750 gallon stainless steel tank, measures 96" diameter x 88" straight side with dish top and bottom. Tank is jacketed for 150 psi @ 100 degrees Fahrenheit. Unit includes (2) 3" top inlets, 19-1/2" top manway with door, 2" center bottom discharg...
  15. S741036 _A

    Mixer, Dispersion, 10 HP, S/st, Morehouse Cowles, Mdl 510

    Stock Number: S741036

    Morehouse Cowles dispersion mixer model 510 VHVO, 10 hp explosion proof motor, 230/ 460 volt, 1755 rpm. Unit is complete with floor pedestal mount with air over hydraulic lift, includes 1-5/8" diameter x 32" stainless steel shaft, 38" stroke (less mixing ...
  16. S741035_A

    Mixer, Dispersion, 10 HP, S/st, Big H

    Stock Number: S741035

    Big H dispersion mixer, 10 hp explosion proof motor, 220/ 440 volt, 1200 rpm. Unit is complete with floor pedestal mount with air over hydraulic lift, includes 1-5/8" diameter x 42" stainless steel shaft, 48" stroke and 13" dispersion blade, heavy duty in...
  17. S741034 (1)

    Tank, 125 Gallon, S/st, Agit, FV, 35 PSI, JV Northwest

    Stock Number: S741034

    JV Northwest 125 gallon stainless steel tank. Unit measures 36" diameter x 28" straight side with dome top and dish bottom. Unit is teflon lined, has site tube, is rated for 35 PSI / full vac @ 300 deg. F. internal. Includes Tri-Clover top fittings (1) 7-...
  18. S741033 (2)

    Tank, 50 Gallon, S/st, Agit, FV, 35 PSI, JV Northwest

    Stock Number: S741033

    JV Northwest 50 gallon stainless steel tank. Unit measures 24" diameter x 24" straight side with dome top and dish bottom. Unit is teflon lined, has site tube, is rated for 35 PSI / FV @ 300 deg F. internal. Has Tri-Clover top fittings (1) 9-1/2"; (3) 1-1...
  19. S741029 (1)

    Tank, 435 Gallon, 2-Tank, Agit, Flocculant Mix Skid,

    Stock Number: S741029

    Floculant tank/pumping and mixing system. Includes two plastic tanks mounted on common skid. One tank measures 42" diameter X 60" straight side (approximately 360 gallons). Includes Lightnin EV6P25 agitator driven by approximately 1/4 HP, 115/230V motor. ...
  20. S741026_A

    Pasteurizer, Plate, APV, S/st, Sterilizer, Paraflow,

    Stock Number: S741026

    APV paraflow plate sterilizer, model HX, serial number MC3657 with stainless steel plates (57 @ 10" x 33", 4 ports @ 2" and moveable end ports @ 2". Unit includes Waukesha positive displacement pump, serial number 131067 rated for 17 GPM, 1-1/2" inlet/out...
  21. S741024_A

    Sealer, Bag, Band Sealer, 5" X 26",

    Stock Number: S741024

    Bag sealer, stainless steel contacts. Unit has 5" wide X 34" long rubber belt feeding 26" long sealing area. Complete with temperature, speed, and fan controls. Previously used in nutraceutical operation. Very good condition....
  22.  S741023_A

    Tunnel, Shrink, 6" X 15", S/st, Link Belt,

    Stock Number: S741023

    Shrink tunnel, all stainless steel contacts. Heating section measures 39" long with 6" wide X 15" high aperture. Includes 55" stainless steel link belt. Complete with adjustable temperature controls. Driven by 9 KW (12 HP), 50-60Hz motor. Mounted on stand...
  23. S741022_A

    Press, Screw, 8" Diameter, S/st, JS Press, Continuous,

    Stock Number: S741022

    Stainless steel continuous screw press, manufactured by JS Maskinfabrik (Denmark), "JS Press," type 200-150-750. Screw pressing area measures 8" X 40" long, includes stainless steel covers and mounted on stainless steel base. Press is fed through 4" diame...
  24. S741021_A

    Heat Exchanger, Plate, Mueller, 95 SF, S/st, 28 Plates,

    Stock Number: S741021

    Plate type heat exchanger, manufactured by Mueller, model number ATI59FFF-10. Unit includes twenty-eight (28) plates measuring 41" long X 12" wide for a total surface area of approximately 95 square feet. Rated for 58 PSI @ 150 degrees Fahrenheit.
    ...
  25. Heat Exchanger, Plate, 110 SF, S/st, 30 Plates,

    Heat Exchanger, Plate, 110 SF, S/st, 30 Plates,

    Stock Number: S741020

    Stainless steel plate type heat exchanger. Unit has thirty (30) plates measuring 12" wide X 44" long for a total surface area of 110 square feet. Includes manual hand crank. Unit has 2" inlet/outlet....
  26. S741019_A

    Peeler, Pease, Apple, 4-Station, 3/4 HP,

    Stock Number: S741019

    Apple peeler/corer, manufactured by Pease. Unit is a 4-station peeler. Each station includes corer and slicing blade. Driven by 3/4 HP, 115-208/230V motor.
    ...
  27. S741018_A

    Conveyor, Belt, 36" X 96", S/st, Laner, Frame, (3)

    Stock Number: S741018

    (3) Stainless steel belt conveyor frame, capable of accommodating 36" wide X 96" long belt. Unit includes six (6) sets of belt gears. Includes two (2) 15" wide X 48" long side reservoirs with bottom drains. Less motor....
  28. S741017 _A

    Slicer, Brothers, 1/4" Slice, Manual, Vegetables,

    Stock Number: S741017

    Brothers vegetable slicer, type Legrow Vegetable Slicing Machine. Unit includes three (3) 7" diameter feed openings where product is pushed through high speed slicing blade. Currently set for 1/4" slices. Includes .85 HP motor through gearbox with vari-sp...
  29. S741016_A

    Cooler, Rotary, Pouch, 4' X 6', S/st,

    Stock Number: S741016

    Stainless steel rotary pouch cooler, manufactured by Chester Chensen, size TC4-6. Cooling chamber measures 4' diameter X 6' long with 1/2" diameter openings. Includes three (3) quick access doors. Unit has 2" diameter water feed and discharge. Includes ma...
  30. S741015_A

    Tank, 528 Gallon, S/st, 47" X 68", DB/DT,

    Stock Number: S741015

    Tank, 528 gallon, stainless steel. Unit measures 47" diameter x 68" straight side with dome top, 18" manway, and dish bottom. Unit has 2" center bottom discharge, is on a stand with 3" pipe legs.
    ...
  31. S741014_A

    Tank, 528 Gallon, S/st, 47" X 68", DB/DT, Insulated

    Stock Number: S741014

    Tank, 528 gallon, insulated stainless steel. Unit measures 47" diameter x 68" straight side with dome top and dish bottom. Unit has 2" center bottom discharge, is on a stand with 3" pipe legs.
    ...
  32. S741013_A

    Tank, 528 Gallon, S/st, 47" X 68", DB/DT, Less Cover

    Stock Number: S741013

    Tank, 528 gallon, stainless steel. Unit measures 47" diameter x 68" straight side with dome top (less cover) and dish bottom. Unit has 2" center bottom discharge, is on a stand with 3" pipe legs....
  33. S741012_A

    Tank, 550 Gallon, S/st, 48" x 70", DB/DT, Agit, (2)

    Stock Number: S741012

    (2) Tank, approximately 550 gallon, sanitary stainless steel measuring 48" diameter x 70" straight side with dish bottom and dome top. Unit has top entering Sharpe agitator on flange mount support driven by .33 hp thru gearbox, 208/230/460V, 1140 RPM, 3 p...
  34. S741011_A

    Dust Collector, Baghouse, Central, 2 HP, (2)

    Stock Number: S741011

    (2) Central Machinery baghouse dust collector. Unit is model 97869, with 2 Hp, 120 volt, 3450 rpm single phase drive. Has top bag dimensions of 19-1/2" diameter x 30" long, bottom bag 19-1/2" diameter x 30-3/8" long, bag filtration is 5 microns, intake is...
  35. S741010_A

    Mixer, Ribbon, 1 CF, S/st, JH Day, 1/2 HP, Portable,

    Stock Number: S741010

    J.H. Day 1 cu. ft. stainless steel ribbon mixer, trough measures 13" wide X 16" long X 14" deep, stainless steel internals with double ribbon assembly. Driven by 1/2 HP, 220/440V motor thru v-belt assembly. Trough includes stainless steel hinged top cover...
  36. S741009_A

    Pump, Diaphragm, 3", S/st, Wilden,

    Stock Number: S741009

    Wilden stainless steel diaphragm pump, 3" diameter in/out, 316 stainless steel construction, includes air inlet connection. Wilden model number 15, serial number 15-5000-03. ...
  37. S741006_A

    Dicer, Urschel, Mdl CD, S/st, 5 HP,

    Stock Number: S741006

    Urschel Dicer, appears to be model CD, stainless steel contacts. Unit includes feed and discharge chute. Approximately 1/3" spacing between blades. Complete with control panel. Driven by 5 HP, 208-230/460V, 1725 rpm, 3/60Hz motor. Mounted on stainless ste...
  38. S741001_A

    Can Opener, Edlund, S/st, 603 Dia.,

    Stock Number: S741001

    Can opener, manufactured by Edlund, all stainless steel contacts. Unit is currently set for 603 diameter cans. Features adjustable height. Includes infeed and discharge guides. Complete with pneumatic discharge ram. Previously used in food operation....
  39. S741000_A

    Sealer, Bag, Doboy, Mdl B500, S/st, 1 HP,

    Stock Number: S741000

    Bag sealer, manufactured by Doboy, model B500. Unit includes "Direct View 1000" digital controls and Watlow heating controller. Features adjustable height. Driven by 110V, 1 HP, 1/60Hz motor. Serial # 01-23254. Previously used in food operation....
  40. S740999_A

    Refrig, Chiller, Plate, S/st, (10) Plates,

    Stock Number: S740999

    Stainless steel plate chiller, manufactured by Mueller, model number NS7-R. Unit includes ten (10) plates measuring 60" long X 35" tall. Can be used with R22, R12, and 502 refrigerant. Unit has 1" inlet and 1.5" outlet on plates with 2" water inlet. Mount...
  41. S740998_A

    Refrig, Chiller, Plate, S/st, (6) Plates,

    Stock Number: S740998

    Stainless steel plate chiller, manufactured by Mueller. Unit includes six (6) plates measuring 60" long X 35" tall. Rated for 170 psi. Can be used with R22, R12, and 502 refrigerants. Unit has 1" diameter in/out on plates with 2" diameter water inlet. Mou...
  42. S740997_A

    Kettle, 60 Gallon, S/st, Jkt, Groen, Mdl D60, Tilt,

    Stock Number: S740997

    Stainless steel jacketed kettle with manual tilt capability, manufactured by Groen, model number D60. Bowl measures 30" diameter X 25" deep. Jacket rated for 25 psi @ 300 degrees Fahrenheit. National Board Number 64471. Previously used in food operation....
  43. S740995_A

    Conveyor, Belt, 15" X 84", S/st, Incline,

    Stock Number: S740995

    Stainless steel belt conveyor with rubber belt and slight incline. Belt measures 15" wide X 84" long. Unit has 5'6" discharge height. Mounted on stainless steel frame. Previously used in food operation....
  44. S740994_A

    Peeler, Ron Bichel, S/st, Abrasive, 28" x 70", Screw,

    Stock Number: S740994

    Stainless steel peeler, manufactured by Ron Bichel Co. Peeling chamber measures 70" long X 28" wide. Includes eight (8) abrasive rollers measuring 7" diameter X 70" long. Unit includes 20" diameter stainless steel screw conveying portion mounted on 2.5" d...
  45. S740993_A

    Kettle, 150 Gallon, S/st, Jkt, Brighton, Scrape Agit,

    Stock Number: S740993

    Stainless steel jacketed kettle, manufactured by Brighton, 150 gallon capacity. Jacket is rated for 100 psi @ 328 deg F. Bowl measures 44" diameter X 34" deep with 3" diameter center bottom outlet. Includes bridge mounted scrape agitation. Agitator blades...
  46. S740992_A

    Kettle, 150 Gallon, S/st, Jkt, Brighton, Scrape Agit,

    Stock Number: S740992

    Stainless steel jacketed kettle, manufactured by Brighton, 150 gallon capacity. Jacket is rated for 100 psi @ 323 deg F. Includes bridge mounted scrape agitation. Agitator blades measure 40" wide X 2" high X 1/2" thick (Agitation is damaged). 3" center bo...
  47. S740991_A

    Kettle, 150 Gallon, S/st, Jkt, Lee, Scrape Agit,

    Stock Number: S740991

    Stainless steel jacketed kettle, manufactured by Lee, 150 gallon capacity. Jacket is rated for 90 psi @ 330 deg F. Includes bridge mounted scrape agitation. Agitator blades measure 40" wide X 2" high X 1/2" thick. Mounted on stainless steel frame with foo...
  48. S740990_A

    Mill, Disintegrator, S/st, 8", 3 HP,

    Stock Number: S740990

    Stainless steel disintegrator mill with 8" diameter grinding chamber. Includes stainless steel feed chute and screen. Grinding portion has approximately 1/2" diameter openings. Driven by 3 HP, 115/230V, 1/60Hz, 1750 rpm motor. Previously used in food oper...
  49. S740989_A

    Kettle, 40 Gallon, S/st, Jkt, Groen, Mdl DH/1-40, Tilt,

    Stock Number: S740989

    Stainless steel jacketed kettle with tilt capability, manufactured by Groen, model number DH/1-40. 40 gallon capacity. Bowl measures 26" diameter X 27" deep. Unit rated for 50 PSI number 300 degrees Fahrenheit. Previously used in food operation. Serial nu...
  50. S740988_A

    Slicer, Eillert, Type G-1500, S/st, Conveyor Fed,

    Stock Number: S740988

    Eillert slicer, type G-1500. Unit includes 6" wide X 72" long rubber feed conveyor leading to top hold down belt located at slicing area. Includes 2-blade stainless steel slicing wheel with curved blades. Complete with stainless steel cover. Includes digi...
  51. S740986_A

    Dicer, Urschel, Mdl CC, S/st, 2 HP,

    Stock Number: S740986

    Urschel dicer/shredder, model CC. Unit includes cutting head housing and feed hopper. Complete with controls. Driven by approximately 2 HP motor. Mounted on stainless steel legs with casters. Previously used in food operation....
  52. S740985_A

    Dicer, Eillert, Type BL 1000 VAR, S/st, Stripping-Dicing,

    Stock Number: S740985

    Eillert dicer, type BL 1000 VAR, machine number 157. Unit includes rotary feed with stationary cutter. Complete with crosscut knife assembly, currently less circular knife assembly. Includes controls and main drive. Driven by 2 phase, 230V motor. Previous...
  53. S740998_A

    Dicer, Urschel, Mdl G, S/st, 2 HP,

    Stock Number: S740984

    Urschel Dicer, model G, stainless steel contacts. Unit includes feed and discharge chute. Approximately 1/3" spacing between blades. Driven by 2 HP, 208-230/460V, 3/60Hz, 1160 rpm motor. Mounted on stainless steel frame with casters. Serial number 640. Pr...
  54. S740981_A

    Mixer, Oakes, Slurry, S/st, 90 Gallon,

    Stock Number: S740981

    Stainless steel Oakes slurry mixer, model number 30SMV151. Mixing chamber measures 30" diameter X 30" deep. Includes agitator shaft with eight (8) paddles measuring 2.5" thick X 12" long mounted on common shaft. Chamber includes six (6) stationary baffles...
  55. S740980_A

    Kettle, 60 Gallon, S/st, Jkt, Welbilt, Mdl KDL-60T, Tilt,

    Stock Number: S740980

    Stainless steel jacketed kettle with tilt capability, manufactured by Welbilt, model # KDL-60T, 60 gallon capacity. Bowl measures 30" diameter X 26" deep with 3" diameter side-bottom discharge. Jacket rated for 50 PSI @ 298 degrees Fahrenheit.. Mounted on...
  56. S740979_A

    Kettle, 40 Gallon, 316 S/st, Jkt, Cleveland, Mdl KGL-40, Self-Contained,

    Stock Number: S740979

    Jacketed self-contained gas fired kettle, manufactured by Cleveland, model number KGL-40, 40 gallon capacity. Unit has 316 stainless steel contacts. Bowl measures 26" diameter X 21" deep with 3" side-bottom discharge. Jacket rated for 50 PSI @ 298 degrees...
  57. S740978_A

    Tank, 150 Gallon, S/st, 40" X 30", Disc, 3 HP,

    Stock Number: S740978

    Stainless steel tank, 40" diameter X 30" straight side, approximately 150 gallon capacity. Includes bridge-mounted disc agitator driven by 3 HP, 230/460V, 1730 rpm Baldor electric motor through gearbox. Includes dual compartment hinged lid. Unit has sligh...
  58. S740977_A

    Kettle, 80 Gallon, S/st, Jkt, Legion, Mdl LGB-80, Self Contained,

    Stock Number: S740977

    Stainless steel self-contained jacketed kettle, manufactured by Legion, model # LGB-80, 80 gallon capacity. Bowl measures 33" diameter X 28" deep with 1-1/2" side bottom discharge. Jacket rated for 25 PSI @ 265 deg F. Mounted on 12" pipe legs. Previously ...
  59. S740976_A

    Kettle, 60 Gallon, S/st, Jkt, Groen, Mdl H60,

    Stock Number: S740976

    Stainless steel jacketed kettle, manufactured by Groen, model number H60, 60 gallon capacity. Bowl measures 30" wide X 22" deep with 1-1/2" center bottom outlet. Jacket rated for 40 psi. Previously used in food operation. Good condition....
  60. S740975_A

    Kettle, 40 Gallon, S/st, Jkt, Southfield, Mdl KSLG-40,

    Stock Number: S740975

    Stainless steel jacketed kettle, manufactured by Southfield A. Middleby, 40 gallon capacity. Unit is a "SteamMaster" model number KSLG-40. Unit is a self-contained gas-fired kettle. 3" diameter side bottom discharge. Jacket rated for 50 PSI @ 292 degree F...
  61. S740974_A

    Kettle, 60 Gallon, S/st, Jkt, Groen, Mdl DL/60, Tilt,

    Stock Number: S740974

    Stainless steel jacketed kettle with tilt capability, manufactured by Groen, model number DL/60. Bowl measures 28" diameter X 24" deep. Jacket rated for 25 PSI @ 300 degrees Fahrenheit. Previously used in food operation....
  62. S740973_A

    Mixer, Paddle, 8 CF, S/st, Butcher Boy, 2 HP,

    Stock Number: S740973

    Stainless steel paddle mixer, manufactured by Butcher Boy, model number 250 MF, approximately 8 cubic foot capacity. Trough measures 31" long X 20" wide X 24" deep. Includes manual tilt capability. Driven by 2 HP, 230/460V, 3/60hz motor. Mounted on mild s...
  63. S740971_A

    Kettle, 20 Gallon, S/st, Jkt, Groen, Self Contained, Mdl DH-20, Tilt,

    Stock Number: S740971

    Stainless steel gas fired self-contained jacketed kettle with tilt capability, manufactured by Groen, model number DH-20, 20 gallon capacity. Unit driven by single phase 120V, 60hz motor. Unit is gas fired. Previously used in food operation....
  64. S740970_A

    Kettle, 60 Gallon, S/st, Jkt, Cleveland, Mdl KDL-60T SH, Tilt,

    Stock Number: S740970

    Stainless steel jacketed kettle with tilt capability, manufactured by Cleveland, model number KDL-60T SH, 60 gallon capacity. Bowl measures 33" diameter X 24" deep with 1-1/2" center bottom discharge. Jacket rated for 50 psi @ 298 degrees Fahrenheit. Prev...
  65. S740969_A

    Mixer, Ribbon, 15 CF, S/st, JH Day, 5 HP,

    Stock Number: S740969

    Stainless steel ribbon mixer, manufactured by JH Day, 15 cubic foot capacity. Trough measures 60" long X 24" wide X 22" deep. Includes 4" center bottom outlet with manual valve discharge. Includes dual hinged lid. Ribbon driven by 5 HP, 220/440V, 3/60hz m...
  66. S740968_A

    Mixer, Paddle, 20 CF, S/st, Hydraulic,

    Stock Number: S740968

    Stainless steel paddle mixer, approximately 20 cubic foot capacity. Trough measures 34" long X 36" wide X 32" deep. Includes manual slide gate discharge measuring 10" wide X 20" long. 31" discharge height. Mounted on stainless steel frame with footpads. I...
  67. S740967_A

    Mixer, Paddle, 15 CF, S/st, DMX 500, 5 HP, Tilt, (2)

    Stock Number: S740967

    (2) Daniels Food Equipment model DMX 500 stainless steel paddle mixer. Approximately 15 cubic foot capacity. Chamber measures 34" long X 29" wide X 30" deep. Unit includes paddle type agitation with internal baffles. Includes tilt capability with lipped p...
  68. S740966_A

    Mixer, Ribbon, 15 CF, S/st, DMX 500, 5 HP, Tilt,

    Stock Number: S740966

    Daniels Food Equipment model # DMX 500 QUAD mixer, approximately 15 cubic foot capacity. Chamber measures 33" long X 24" wide X 30" deep. Includes single ribbon with paddle attachment mounted on common shaft. Ribbon and paddles measure 1/4" thick. Include...
  69. S740964_A1

    Tank, 150 Gallon, S/st, 48" X 17", APV, Sweep Agit, (2)

    Stock Number: S740964

    (2) Stainless steel tank, manufactured by APV, model # CLA, approximately 150 gallon capacity. Tank measures 48" diameter X 17" straight side. Includes heavy duty sweep agitation with internal baffles and internal spray ball. Includes 18" diameter top man...
  70. S7409641_A

    Tunnel, Shrink, 22" X 12", J&D Enterprises, S/st, Mesh Belt,

    Stock Number: S740961

    Shrink tunnel, manufactured by J&D Enterprises, model # JD212. Tunnel measures 22" wide X 53" long with 12" high opening. Includes stainless steel mesh belt conveyor measuring 20" wide X 72" long. Complete with controls. Previously used in food operation....
  71. S740960_A

    Filler, Piston, Single, Hinds-Bock, SP-64

    Stock Number: S740960

    Stainless steel piston filler, manufactured by Hinds-Bock, model number SP-64. Includes agitated feed hopper measuring 21" diameter X 17" deep with 1.5" diameter discharge. Includes manual foot pedal. Mounted on stainless steel frame with casters. Previou...
  72. S740959_A

    Conveyor, Vibratory, 30" X 72", S/st, Commercial,

    Stock Number: S740959

    Stainless steel vibratory conveyor, manufactured by Commercial. 30" wide X 72" long conveying section. Screening section measures 30" wide X 36" long. Unit has 2'6" high discharge. Job number 8828, serial number S8958828. Mounted on stainless steel frame....
  73. S740956_A

    Pump, Peristaltic, S/st, Larox, 5 HP, 2",

    Stock Number: S740956

    Stainless steel peristaltic pump, manufactured by Larox, model @ LPP-T 40 BS10-6-0. 2" inlet/outlet. Unit has a maximum flow rating of approximately 33 GPM. Includes Blacoh fluid control model # CTP4000ND rated for 125 PSI. Driven by 5 HP, 3/60Hz, 230/460...
  74. S740955_A

    Mixer, Ribbon, 75 CF, S/st, 20 HP, 40" X 96", Bag Break,

    Stock Number: S740955

    Stainless steel ribbon mixer, approx. 75 cu. ft. capacity, double ribbon, driven by 20 HP gearhead motor through chain and sprocket. Trough measures 40" wide X 96" long and includes end bottom discharge on each side (one outlet is currently blanked). Offe...
  75. S740954_A

    Tank, 12,700 Gallon, C/st, 11'6" X 14', 50 PSI, DT/DB, (2)

    Stock Number: S740954

    (2) Unused carbon steel pressure tank, manufactured by Savannah Tank & Mfg, approximately 12,700 gallon capacity. Tank measures 11'6" diameter X 14' straight side with dish top and bottom. Rated for 50 PSI internal @ 500 degrees Fahrenheit. Designed as a ...
  76. S740950_A

    Mill, Lump Breaker, 43" x 43", S/st, 2-Roll, S/st Pins,

    Stock Number: S740950

    Twin roll lump breaker, stainless steel construction, Includes 7" diameter x 34" long stainless steel shafts with welded pins that overlap during rotation, pins measure size 1/2" diameter x 4" long. Stationary pins are also welded to inner wall of hopper....
  77. S740949_A

    Dryer, Apron, 80" x 54', S/st, Proctor & Schwartz, Dbl Pass

    Stock Number: S740949

    Proctor & Schwartz double pass apron dryer, all stainless steel construction, belt measures 80" wide X 54' long, 43' heated section, 66'6" overall length. Belt has 1/4" x 1/16" slot openings on 9/64" centerlines staggered. Product is fed onto top belt and...
  78. S740947_A

    Pump, Positive, Waukesha, Mdl 030, S/st, 3 HP, S740947

    Stock Number: S740947

    Waukesha positive displacement pump, model number 030. Unit has 1-1/2" inlet/outlet with tri-clamp fittings. Driven by 3 HP, 208-230/460V, 3/60Hz, 1760 rpm Sterling electric motor through gearbox. Includes Lenze AC Tech variable speed controller. Mounted ...
  79. S740946_A

    Pump, Positive, Waukesha, Mdl 030, S/st, 3 HP,

    Stock Number: S740946

    Waukesha positive displacement pump, model number 030. Unit has 1-1/2" inlet/outlet with threaded fittings. Driven by 3 HP, 208-230/460V, 3/60 Hz, 1760 rpm Sterling electric motor through gearbox. Includes Lenze AC Tech variable speed controller. Mounted ...
  80. S740945_A

    Tank, 150 Gallon, S/st, (2) 24" x 39", SB/OT

    Stock Number: S740945

    Stainless steel tank, 150 gallon total, has (2) 24" diameter x 39" straight side tanks, slope bottom and open top. Units have 3" side bottom discharge, unitized on stainless steel frame....
  81. S740944_A

    Separator, Cyclone, 60" X 120", C/st, Air,

    Stock Number: S740944

    Cyclone air separator, all carbon steel construction. Chamber measures 60" diameter X 36" straight side with 85" cone bottom. Includes 18" diameter inlet and 8" diameter discharge outlet. Mounted on mild steel frame. Fair condition....
  82. S740939_A

    Case Taper, Belcor, Top & Btm, Mdl 252, 25 CPM,

    Stock Number: S740939

    Belcor (Wexxar) Model 252 top and bottom case taper, machine is capable of speeds of 25 cases per minute, (depending on case size). Has a case range of 8" to 20" long X 6" to 15" wide X 4-1/2" to 16" high. Serial number 114171, Rated for 0.5 HP, 120V, 1 P...
  83. S740938_A

    Caser, Erector, Belcor, Mdl 505, Pack Station,

    Stock Number: S740938

    Belcor 505 Semi-Automatic Case Box Former / Erector and Pack Station, Model number 505, Serial number 505-7276, constructed of stainless steel and aluminum. Quick size change over adjustment feature. Case size range 8" to 26.5" Long, 6" to 16" Wide, minim...
  84. S740937_A

    Grinder, Meat, Butcher Boy, Mdl A45250H, C/st, 4" Dia.,

    Stock Number: S740937

    Meat grinder, manufactured by Butcher Boy, model number A4250H. Includes stainless steel collection table measuring 44" long X 24" wide X 5" deep with 8" diameter feed leading to 4" diameter discharge with carbon steel auger. Driven by 5 HP, 208V, 3/60Hz ...
  85. S740935_A

    Conveyor, Belt, 8" x 9', Alum, Dorner, 2200 Series, 3/8 HP

    Stock Number: S740935

    Dorner flat belt conveyor, 2200 series, measures 8" wide x 9' long with aluminum frame, 36" adjustable height, model 25M081000A0103. Unit has 3/8 hp, 60 hz, 3 ph, 340 rpm drive. Serial number 387312-02....
  86. S740934_A

    Conveyor, Belt, 8" x 10', Alum, Dorner, 2200 Series, 3/8 HP

    Stock Number: S740934

    Dorner flat belt conveyor, 2200 series, measures 8" wide x 10' long with aluminum frame, 36" adjustable height, model 25M081000A0103. Unit has 3/8 hp, 60 hz, 3 phase, 340 rpm drive. Serial number 387312-01.
    ...
  87. S740933_A

    Conveyor, Belt, 6" x 5', Alum, Maruyasu, 1/8 HP, (2)

    Stock Number: S740933

    (2) Maruyasu mini series belt conveyor, model MMX224, measures 6" wide x 5' long with adjustable height, aluminum frame and 1" guide rails. Unit has 1/8 hp, 90w, 200/220/230v, 3 ph, 60 hz drive.
    ...
  88. S740932_A

    Conveyor, Belt, Plastic, System, Dual, S/st,

    Stock Number: S740932

    Pacific Conveyor Systems plastic mesh belt dual conveyor system. (1) measures 4" wide x 11' long; (1) measures 4" wide x 10' long, 32" height. Unit is food grade, stainless steel frame, adjustable height, complete with 8" x 9' stainless steel shelf along ...
  89. S740931_A

    Conveyor, Belt, Plastic, System, Triple, S/st,

    Stock Number: S740931

    Pacific Conveyor Systems plastic mesh belt triple conveyor system. (1) measures 7-3/4" wide x 11' long; (2) measures 7-3/4" wide x 10'8" long, 36" height. Unit is food grade, stainless steel frame, adjustable height, complete with 8" x 9' stainless steel ...
  90. S740923_A

    Kettle, 80 Gallon, S/st, Groen, Jkt,

    Stock Number: S740923

    Groen 80 gallon jacketed stainless steel kettle, model number F80. Unit measures 32" diameter X 29" deep with 1-1/2" center bottom outlet with manual valve. Jacketed for 45 PSI @ 650 degrees F. Mounted on three (3) stainless steel pipe legs with foot pads...
  91. S740922_A

    Chopper, Bowl, Hobart, S/st, Mdl HCM 450

    Stock Number: S740922

    Stainless steel Hobart bowl chopper, appears to be model number HCM 450. Bowl measures 20" diameter X 12" deep. Includes two (2) 2" wide X 7" long curved blades. Includes manually controlled top knead/mix attachment. Includes cover with locking mechanism....
  92. S740921_A

    Tank, 120 Gallon, S/st, Agit, Insul, FT/CB,

    Stock Number: S740921

    120 gallon stainless steel insulated and agitated tank. Unit measures 30" diameter X 38" deep with 1-1/2" center bottom outlet. Unit has cone bottom and flat top. Includes high shear clamp-on emulsifier/homogenizer driven by 3 HP, 230/460V, 3450 rpm, 3/60...
  93. S740920_A

    Kettle, 40 Gallon, S/st, Groen, Jkt, 55 PSI,

    Stock Number: S740920

    Groen 40 gallon jacketed kettle, model number FTWB 40 SP. Unit is jacketed for 55 PSI @ 338 degrees F. Unit measures 26" diameter X 22" deep with 1-1/2" center bottom outlet. 1" jacket inlet/outlet. Includes hinged lid. Mounted on stand with casters....
  94. S740919_A

    Pulper, Finisher, FMC, Mdl 50, S/st, 7.5 HP,

    Stock Number: S740919

    FMC model 50 finisher, stainless steel. Includes 12" diameter X 21" long pulping section. Unit has four-paddle set up with curved paddle ends. Each paddle measures 1-1/2" wide X 1/2" thick X 21" long. Screen size .020. Unit has 1-1/4" inlet with 2" liquid...
  95. S740918_A

    Pump, Centrif., 5 HP, S/st, 2", Purity, Mdl C218,

    Stock Number: S740918

    Centrifugal pump, manufactured by Purity Pump, model number C218. Unit has 2" inlet and 1-1/2" outlet. Driven by approximately 5 HP Baldor electric motor. Includes Allen Bradley start/stop switch. Mounted on stainless steel cart....
  96. S740917_A

    Pump, Positive, Waukesha, Mdl 030, S/st, 1.5 HP,

    Stock Number: S740917

    Waukesha positive displacement pump, model number 30. Unit has 1-1/2" inlet/outlet with sanitary tri-clamp fittings. Driven by 1.5 HP, 230/460V, 3/60Hz, 460 - 2290 rpm vari-speed motor through gearbox with 4.47:1 ratio. Mounted on stainless steel frame. S...
  97. S740916_A

    Tank, 425 Gallon, S/st, Rectangular, Jkt, Insul

    Stock Number: S740916

    Stainless steel rectangular insulated open top tank, approximately 425 gallon capacity. Trough measures 88" long X 40" wide X 28" deep. Unit has 1-1/2" end bottom outlet. Includes Copelmatic refrigeration package driven by 3/60Hz motor. Unit has center br...
  98. S740915_A

    Tank, 250 Gallon, S/st, Rectangular, Jkt, Agit, Insul

    Stock Number: S740915

    Stainless steel rectangular insulated open top tank, approximately 250 gallon capacity. Trough measures 70" long X 42" wide X 20" deep. Includes agitator driven by single phase, 1/15 hp motor. Paddle measures 5" X 17" wide with 1" thick shaft. Unit has 1-...
  99. S740914_A

    Kettle, 60 Gallon, S/st, Groen, Jkt, Tilt,

    Stock Number: S740914

    Groen 60 gallon stainless steel jacketed kettle, model number DTA3-60SP. Unit is jacketed for 45 PSI @ 300 degree F. Unit measures 30" diameter X 24" deep with 1-1/2" bottom outlet. Includes manual tilt mechanism. National board number 32215. Very good co...
  100. S740913_A

    Heat Exchanger, Plate, Mueller, 200 SF, S/st,

    Stock Number: S740913

    Mueller Accutherm plate type heat exchanger, model number AT10 F20, approximately 200 square foot surface area. Includes (128) plates measuring 8" wide X 30" high. Unit rated for 100 PSI @ 190 degrees Fahrenheit. Maximum pack length of 24.57, minimum of 2...
  101. S740912_A

    Caser, Erector, Pearson, Mdl CE 35-G, Glue, 35 CPM, Wine,

    Stock Number: S740912

    Pearson model CE 35-G case erector with glue sealing, rated for up to 35 cases/minute, previously used at winery. Case size ranges from 5"-30" long X 3.5"-24" wide X 3.5"-26" high. Includes Nordson hot glue system. In good working condition when removed i...
  102. S740911_A

    Dicer, Urschel, Mdl 30, Cutter, 3/4 HP, Slicer, 34" Dia.,

    Stock Number: S740911

    Used Urschel Model 30 crosscut slicer, ideal for elongated products, previously used on green beans. Product drops into narrow cutting pockets and then pass through stationary knives. Can be used on other products such as asparagus, carrots, celery, rhuba...
  103. S740910_A

    Dicer, Urschel, Mdl 30, Cutter, 3/4 HP, Slicer, 38" Dia.,

    Stock Number: S740910

    Used Urschel Model 30 crosscut slicer, ideal for elongated products, previously used on green beans. Product drops into narrow cutting pockets and then pass through stationary knives. Can be used on other products such as asparagus, carrots, celery, rhuba...
  104. S740898_A

    Sealer, Vacuum, Multivac, Mdl. A300/52, Chamber, 24" Wide,

    Stock Number: S740898

    Multivac model number A300/52 stainless steel vacuum sealer with 24" wide seal jaws, Chamber type vacuum sealer with raised top and recessed bottom. New in 1999 with updated controls in 2013. Rated for 220 Volt, 3/60Hz. Serial number 1172. Good condition....
  105. S740895_A

    Kettle, 300 Gallon, S/st, Jkt, Agit, Scrape, Emulsifier, (2)

    Stock Number: S740895

    (2) Oscar Krentz 300 gallon, stainless steel, agitated kettle. Unit measures 60" diameter X 30" deep with 3" center bottom outlet. Complete with single motion scraper agitation driven by 5 HP, 230/460V, 1700 rpm, 3/60Hz motor thru gearbox with 15 rpm outp...
  106. S740894_A

    Stuffer, Vemag, Mdl R500, S/st Hopper, 6.5 HP,

    Stock Number: S740894

    Vemag model R500 "Robot 500." All stainless steel construction. Complete with 110 liter (200 lb.) stainless steel round hopper, dual screws, vacuum pump, etc. Fill rate is adjustable up to 5,500 lbs/hr, 5 - 30,000 adjustable portion weights in increments ...
  107. S736931_A

    Mixer, Agitator, 2 HP, Sharpe Mixers, Mdl G-200VF,

    Stock Number: S736931

    Mixer, agitator, driven by 2 Hp, 1725 rpm, manufactured by Sharpe Mixers, model G-200VF, serial number 38544-2, electric, 208-230/460 V, 3/60 Hz, clamp on type, shaft is 1" diameter x 56" long with 4-blade prop. Good condition....
  108. L740987_A

    Slicer, Urschel, Mdl CC, S/st, 2 HP,

    Stock Number: L740987

    Urschel slicer/shredder, model CC. Unit includes cutting head housing and feed hopper. Complete with controls. Driven by approximately 2 HP motor. Mounted on stainless steel legs with casters. Previously used in food operation....
  109. L740983_A

    Screen, Vibratory, 24" X 56", S/st, Dewatering, 2 HP,

    Stock Number: L740983

    Stainless steel vibratory dewatering screen, manufactured by Commercial. Bed measures 24" wide X 56" long with 5" high side walls. 3' high discharge. Screening portion measures 24" wide X 3' long with 9" X 7" undersize discharge. Driven by approximately 2...
  110. L740982_A

    Screen, Vibratory, 30" X 72", S/st, Dewatering,

    Stock Number: L740982

    Stainless steel vibratory dewatering screen, manufactured by Commercial. 30" wide X 72" long conveying section. Screening section measures 30" wide X 36" long. Unit has 2'6" high discharge. Job number 8828, serial number S8958828. Mounted on stainless ste...
  111. L740957_A

    Unloader, Bag Break Station, Ribbon Mixer, Hopper, S/st,

    Stock Number: L740957

    Bag unloading station with stainless steel ribbon mixer. Includes large HAF bag break station with integrated dust collection system for introduction of powder material. Complete with approximately 75-cubic foot capacity, double ribbon, driven by 20 HP ge...
  112. L740908_A

    Extruder, Vemag, Mdl R500, S/st Hopper, 6.5 HP, Vacuum,

    Stock Number: L740908

    Vemag model R500 "Robot 500" vacuum extruder. All stainless steel construction. Complete with 110 liter (200 lb.) stainless steel round hopper, dual screws, vacuum pump, etc. Fill rate is adjustable up to 5,500 lbs/hr, 5 - 30,000 adjustable portion weight...
  113. L740906

    Cutter, Urschel, Mdl 30, 3/4 HP, Slicer, (4)

    Stock Number: L740906

    (4) Used Urschel Model 30 crosscut slicer, ideal for elongated products, previously used on green beans. Product drops into narrow cutting pockets and then pass through stationary knives. Can be used on other products such as asparagus, carrots, celery, r...
  114. D741056_A

    Mill, Roller, Raymond, 6669, 250 HP,

    Stock Number: D741056

    Raymond Roller Mill, model number 6669 C-E High Side. Unit equipped with all internal related grinding components. Unit has been reconditioned and now includes six new plow bodies and tips along with new grinding ring. Includes double whizzer separator. M...
  115. D741055_A

    Mill, Roller, Raymond, 5057, 100 HP,

    Stock Number: D741055

    Raymond Roller Mill, model number 5057 C-E High Side. Unit equipped with all internal related grinding components. Unit has been reconditioned and now includes five new plow bodies and tips along with new grinding ring. Includes side mounted feeder airloc...
  116. D741025_A

    Mill, Ball, 9' X 26', Polysius, 25 Tons/hr (2)

    Stock Number: D741025

    (2) Ball Mill, manufactured by Polysius, 280 cm diameter X 800 cm long (approximately 9' X 26'). Unit complete with steel lining and frame. Includes electric motor and grinding media. Previously used to grind limestone at approximately 25 tons per hour ou...
  117. D740953_A

    Filler, Bag-in-Box, Liqui Box, Single Head,

    Stock Number: D740953

    Bag-in-box filler, manufactured by Liqui Box Corp., model number 1000C1TW. Stainless steel unit with single head with fitment for Coca-Cola bags. Includes stainless steel roller table. Cutler-Hammer Eaton D100 controller. Solenoid coil voltage: 110V...
  118. D740952_A

    Filler, Bag-in-Box, Dual Head, ABCO, Mdl. B250

    Stock Number: D740952

    Bag-in-box filler, manufactured by ABCO, model number B250. Semi-automatic dual heads bag-in-box filler previously filling beverage products in 5 gallon bag-in-box. Speed depends on operator's dexterity. Average of 125 bags/hour for both heads can be achi...
  119. D740951_A

    Filler, Bag-in-Box, Liqui Box, 5 BPM,

    Stock Number: D740951

    Bag-in-box filler, manufactured by Liqui Box Corp., model number 1000C1BO. Liqui Box filler filling rate is depend upon the operator dexterity, but average filling rate is up to 5-6 BPM for 1 gallon/4 liters, 4-5 BPM for 2-1/2 gallon/10 liters. 3-4 BPM fo...
  120. D740943_A

    Kettle, 400 Gallon, S/st, Dbl Agit, Jkt, Chester Jensen

    Stock Number: D740943

    400 gallon double motion jacketed kettle, manufactured by Chester Jensen, Cooker Cooler model X70N40. Kettle features 400 gallon working capacity, 642 gallon full capacity. Number 0428-P, 8/04. Jacket number 72877, National Board number 26693. Jacket is r...
  121. D740930_A

    Caser, Packer, Standard Knapp, Mdl 939, Laner,

    Stock Number: D740930

    Case packer, manufactured by Standard Knapp, model number 939. With Combi-America diverter and 15 inches x 18 feet laner, stainless steel construction, Plexiglas enclosure, Allen-Bradley Panelview 900 touch screen controls. Allen-Bradley SLC 5/04 CPU and ...
  122. D740929_A

    Caser, Packer, Hartness, Mdl 825, Laner,

    Stock Number: D740929

    Case packer, manufactured by Hartness, model number 825. Air transfer drop case packer. Equipped with a grid numbber G24553 for 16 ounces in 3 x 2 x 2 pattern. Includes laner on infeed.
    ...
  123. D740928_A

    Caser, Packer, Hartness, Mdl 2900, 40 CPM,

    Stock Number: D740928

    Case packer, manufactured by Hartness, model number 2900. Hartness servo soft drop case packer rated up to 40 cases per minute depending on case size and applications. Air consumption: 12-16 CFM @40 cases per minute. Product infeed chain height: 45". Case...
  124. D740905_A

    Former, Tray, SWF, Mdl 1T4, 50 Trays/Min

    Stock Number: D740905

    Tray Former, manufactured by SWF, model # 1T4. Trayformer capable of speeds up to 50 trays per minute (depending on case size). Mechanical pull down with Nordson Problue 10 glue unit and pattern controller. Has a tray size range: 7" to 34" L, 8-1/8"-22"W,...
  125. D740904_A

    Caser, Erector, Little David, Mdl CF30

    Stock Number: D740904

    Case erector, manufactured by Little David, model # CF30. Previously used to fold, close and tape boxes for manufactured parts. Capable of speed up to 10 cases per minute. Can handle cases with these dimensions: length 8"-18", width 8"-15" and height 6"-1...
  126. D740903_A

    Caser, Erector, McDowell, Mdl 201LH

    Stock Number: D740903

    Case erector, manufactured by McDowell, model number 201LH. Rugged duty compact case erector capable of 30 cases per minute. Has a case size range: 5"- 3/4-24" Long X 5-3/4"-24" Wide X 10"-33" Deep. Capable of erecting and sealing HSC, RSC, and wax cases....
  127. D740902_A

    Former, Tray, SWF, Mdl 1T4, 35 Trays/Min

    Stock Number: D740902

    Former, Tray, Bliss, SWF, Model number 1T4. Capable up to 35 trays per minute (depending on tray size). Tray size range: 7" to 34" L, 8-1/8"-22" W, 1" to 12" D with proper change parts. Knockdown case range: 10-1/2" - 27 7/8 "L, 12"-36" W. Nordson 3500 gl...
  128. D740901_A

    Former, Tray, Bliss, SWF, Mdl ID5A

    Stock Number: D740901

    Bliss tray former, manufactured by SWF, model # ID5A. Tray former can run up to speeds of 12-35 boxes per minute speed ranges will be lower if unit is set up on 50hz. Box sizes:9-1/4 to 31-7/8" in length 8" to 20" in width 4" to 16" in height. Glue unit i...
  129. D740900_A

    Labeler, Roll, Trine, Mdl 4700, Hot Melt,

    Stock Number: D740900

    Roll fed hot melt glue labeler, manufactured by Trine, model # 4700. Quick Changeover Machine, Nordson 3500 Glue System, Infeed Timing Screw Machine, CTC Operator Touchscreen Controls, Web Tracker, Autolube Unit, Last running 1 quart PET bottles, Speeds u...
  130. D740893_A

    Labeler, Pressure Sensitive, Quadrel, Front & Back,

    Stock Number: D740893

    Pressure sensitive labeler, manufactured by Quadrel, model number Q65 Flat Belt. Front and back labeler mounted with Dorner style 16" wide x 123" long conveyor section at 32" elevation driven by 1/4 hp DC motor. Dispensing speed is up to 2200" per minute,...
  131. D740892_A

    Labeler, Roll, Trine, Mdl 6500

    Stock Number: D740892

    Roll fed labeler, manufactured by Trine, model number 6500. Designed for filled or empty container decoration, the model 6500 can apply a full wrap, partial wrap or spot label. Label web width from 1.0" to 6.5" and placed .06" to 8.5" to the top. High spe...
  132. D740891_A

    Labeler, Pressure Sensitive, PE, Rotary, 16 Station,

    Stock Number: D740891

    Pressure sensitive rotary labeler, manufactured by PE Systems, model number S 1120/16T/4S-2L. Pressure sensitive non-stop redundant labeler with front labeling capability. Clockwise rotation and feeds from right and exit at left. (1) pe Model 90 pressure ...
  133. C741053_A

    Tank, 1,745 Gallon, 316 S/st, Carnitech, FT/CB, Square (3)

    Stock Number: C741053

    (3) Tank, 1,745 Gallon (6,600 Liters), measures 2.05 x 2.1 x 2 meters. Manufactured by Carnitech, constructed of 316 stainless steel. Flat top with cone bottom leading to 2" and 3" outlets. Features (2) 6" site glass windows, 22.75" x 35" side manhole (bo...
  134. C741052_A

    Tank, 800 Gallon, S/st, Insul, Carnitech, FT/CB, Agit, (6)

    Stock Number: C741052

    (6) Tank, approximately 790 gallon, stainless steel with insulation. Unit measures 70" diameter x 47.5" straight side with flat top and cone bottom. Manufactured by Carnitech, features extra thick stainless steel design, (3) site glass windows with scrape...
  135. Dryer, Vacuum, Sigma, 200 Gallon, S/st, Jkt, 125 HP,

    Dryer, Vacuum, Sigma, 200 Gallon, S/st, Jkt, 125 HP,

    Stock Number: C741051

    Aaron Process vacuum drying sigma mixer, all stainless steel construction, 200 gallon capacity. All parts are insulated and sheathed with 304 stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber is jacketed and rated for 200 PSI @ ...
  136. C741046_A

    Sorter, Color, Sizer/Grader, 6 Lanes, Compac, inVision 9000

    Stock Number: C741046

    Compac inVision 9000 blemish grading system, features 6 lanes with rotating feed through system, 6 "G" carrier lanes with 15 sort out locations (drop spots). Complete with PLC controls, LCD display monitors. Capable of running 20 plus tons of potatoes per...
  137. C741032 (1)

    Tank, 15,000 Gallon, S/st, 13' X 16', Vertical, Agit, (2)

    Stock Number: C741032

    (2) Tank, approximately 15,000 gallon capacity, vertical, stainless steel construction. Measures 13' diameter x 15' straight side. with flat top and cone top and slight sloping bottom. 5 HP side-mounted propeller agitator. ...
  138. C741031_A

    Screen, Midwestern, 24", Single, S/st, 1/3 HP, Sweco Style,

    Stock Number: C741031

    Midwestern Gyra-Vib 24" diameter vibratory screen, single deck unit, includes stainless steel screen and decks with 6" diameter outlets. Midwestern model number ME24S4-6. Driven by 1/3 HP motor thru v-belt assembly, rated for 115/230 Volt, 8.2/4.1 amps. S...
  139. Conveyor, Chainbelt, 33" x 8', Plastic, 3/4 HP,

    Conveyor, Chainbelt, 33" x 8', Plastic, 3/4 HP,

    Stock Number: C740924

    Plastic chainbelt conveyor, unit measures 33" wide x 8' long with 3/4 hp, 400/230 volt motor. On stainless steel frame. Excellent condition.
    ...
  140. C740876 (1)

    Mixer, Sigma, 200 Gallon, S/st, Jkt, 200 PSI, 125 HP,

    Stock Number: C740876

    Aaron Process vacuum drying sigma mixer, all stainless steel construction, 200 gallon capacity. All parts are insulated and sheathed with 304 S/st and polished to 150 - 180 grit finish. Mixing/drying chamber is jacketed and rated for 200 PSI @ 450 deg. F ...
  141. C739305_A

    Dust Collector, Baghouse, 30" X 8', C/st, Pulse Jet, (2)

    Stock Number: C739305

    (2) Dust Collector, 30" X 8' straight side. Includes top mounted blower driven by 3 HP motor. 8" diameter outlet. Unit has three (3) pulse jet cleaning mechanisms. Complete with side access door and removable top....
  142. C737788_A

    Filter, Cartridge, S/st, 10" x 36", Cuno, Mdl 12DC3,

    Stock Number: C737788

    Cartridge Filter, Manufactured by Cuno, Model 12DC3, Measures 10" diameter x 36" high, Stainless Steel, rated for 150 PSI @ 250 degrees Fahrenheit. Cat #44078-01. New in 2001....
  143. A741050_A

    Mixer, Dough, Peerless, 250 lb, Mdl 3HM, 15/7.5 HP

    Stock Number: A741050

    Stainless steel dough mixer, manufactured by Peerless, model number 3HM. Unit has a capacity of 250 lbs. Unit is a dual speed design with power-operated tilt function. Includes sweet dough agitator and bumper bar. Driven by 575 Volt, 3/60Hz, 15/7.5 HP dua...
  144. A741047_A

    Filling Line, Can, AMS Filler, Canco Seamer, Powder, #10

    Stock Number: A741047

    Complete can filling and seaming line. System includes AMS Model A-400 automated can filling station (set for #10 cans). Station rated for up to 24 cans/minute. System also includes Canco 05 can closer/seamer rated for up to 30 cans/minute with auto lid f...
  145. Centrifuge, Basket, Perforate, S/st, North Star, Mdl FP-95

    Centrifuge, Basket, Perforate, S/st, North Star, Mdl FP-95

    Stock Number: A741045

    Perforated batch-type basket centrifuge, manufactured by North Star Engineered Products, model number FP-95. Unit has all stainless steel contacts. Unit rated for up to 1,950 pounds per hour depending on product. Includes automatic start when lid closes. ...
  146. A741027_A

    Washer, Tray, Unikon, S/st, Sanitary,

    Stock Number: A741027

    Tray Washer, manufactured by Unikon, model # T-1500. Unit features wash cycle consisting of 5.5 - 16 liters. All sanitary/hygienic design. Complete with controls. Driven by 400V, 3/60Hz motor. Previously used in food operation. Very good condition.
    ...
  147. A741007_A

    Press, Membrane, Diemme, Mdl AR80, 8,000 Liter, Wine,

    Stock Number: A741007

    Diemme membrane press, model # AR80, 8,000 liter capacity. Unit includes new, recently installed membrane. Complete with 240V drive. Previously used in wine making operation. Excellent condition....
  148. A741005_A

    Pulper, Finisher, Brown, Mdl 3600, S/st,

    Stock Number: A741005

    Brown pulper/finisher, model # 3600, all stainless steel contacts. Unit mounted on mobile stainless steel frame with casters. Includes recently replaced filter screen and belt. Previously used in fruit/vegetable operation. Very good condition.
    ...
  149. A741002_A

    Dryer, Fluid Bed, 36" x 18', S/st, Carrier, Steam Heated,

    Stock Number: A741002

    Carrier fluid bed dryer, bed measures approximately 36" wide X 18' long, set up as steam heated unit. Equipment is constructed of stainless steel. Complete with Welliver model 608201 cyclone and Premier Pneumatics model number HDRFS1110-8NH1RTT3 rotary ai...
  150. A740996_A

    Mixer, Paddle, 235 CF, S/st, Pharmaceutical,

    Stock Number: A740996

    Stainless steel paddle mixer, 235 cu. ft. capacity, previously used in pharmaceutical environment. Motor was recently rebuilt and equipment is in good condition....
  151. A740936_A

    Washer, Ultrasonic, Crest, Mdl F-300, Degreaser,

    Stock Number: A740936

    Superheated ultrasonic vapor degreaser/washer, manufactured by Crest, model # F-300, all 304 stainless steel construction. Includes dual ultrasonic immersion sumps, stainless steel passivated process tanks and dual spray headers for rinse tanks. Includes ...
  152. A740927_A

    Filter, Pressure Leaf, 7.5 Sq m, Velo, DE Filter,

    Stock Number: A740927

    Velo 7.5 meter Vertical Leaf Velo DE Filter, up gradable to 10 meter. We have maintenance, CIP, and operating SOPs, almost a complete set of spare gaskets, all original manuals. The electric motor had new bearings pressed in about 12 months ago. Runs beer...
  153. A740907_A

    Sealer, Tray, Xtravac, TS690, MAP System, Skin Packaging,

    Stock Number: A740907

    XtraVac TS690 Skin Pack automatic MAP tray sealing machine, capacble of skin pack packaging and tray sealings. All stainless steel construction, set up as 3-lane system and includes change parts for skin pack and sealing. Type XtraVac TS690. Previously ru...

Please wait...